Marking Knife Tips and Tricks - Which One Should You Get? - Must Have Shop Tool
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- Support What We Do at The Katz-Moses Store lddy.no/stih
In this week’s woodworking skill builder we’re talking about Marking Knives. What type should you get? We discuss how to use them and some great tips and tricks. I really can’t wait to see what you create! Let me know what you’d like to see next. Thanks for watching! Please like, comment and subscribe. Cheers!
Read the blog on this video: kmtools.com/bl...
----
The Katz-Moses Store (Suizan Saws, Stop Block, Dovetail Jig and more): lddy.no/stih
Most of the Marking Knives in the Video lddy.no/g4y3
Matt Estlea’s Shop bit.ly/MattEstleaShop
Kiridashi from Chrisman Knives (he is a radical maker give him a follow) / b.chrismanknives
----
Buy the Katz-Moses Magnetic Dovetail Jig: lddy.no/stiz
The Katz-Moses Woodworking Apron: lddy.no/stir
I have Walnut Slabs for sale: lddy.no/stj0
Buy the Katz-Moses Stop Block: lddy.no/stiz
BitsBits is the BEST place to buy router bits: bit.ly/BitsBits USE CODE JKATZMOSES15 for 15% off
Total Boat Epoxy: bit.ly/2I3Q8m4 10% Discount code JKATZMO
----
Essential Woodworking Skills Playlist: • Essential Woodworking ...
----
Woodworking Routers Video Playlist: • DIY Router Table Build...
----
Woodworking Joint of the Week Playlist: • Woodworking Joint of t...
----
Tool Tune Up Thursday Playlist: • Tool Tune Up Thursday
----
Check me out on social media:
jkatzmoses
www.Facebook.com/katzmoseswoodworking
patreon.com/katzmoseswoodworking
/ katzmoseswoodworkingshop
----
Tools I love:
The Katz-Moses Woodworking Apron: lddy.no/stir
My Favorite Dozuki Saw: lddy.no/stit
My Favorite Ryoba Saw: lddy.no/stiv
Marking Gauge: amzn.to/2nlXLuQ
Marking Knife: amzn.to/2nm39Ok
NEW Suizan Flush Trim Saw: lddy.no/stix
Stanley Sweetheart Chisels: amzn.to/2mVMTkF
Knew Concepts Fret Saw: amzn.to/2FUDbYZ
Dewalt Planer Package: amzn.to/2thEf6O
Forrest 10” Combo Blade: amzn.to/2Fdaee3
Festool Tape Measure: amzn.to/2oS3cjD
Starrett 6” Combination Square: amzn.to/2oP3dVw
Woodstock 3 in 1 Shoulder Plane: amzn.to/2FgAS1A
Stanley Low Angle Jack Plane: amzn.to/2oV4I4O
Dewaxed Shellac Flakes: amzn.to/2FeqqYh
Abalone Inlay :amzn.to/2rjMTxe
Abalone Inlay Alternate: goo.gl/DHonFy
5 Minute Epoxy: amzn.to/2FijsSa
Triton 3 ¼ hp Router (with built in lift and edge guide incl): amzn.to/2LBw3Go
Kreg Router Plate: amzn.to/2A7oVNC
Triton Bushing Set: amzn.to/2A7pSpa
Bosch 1 HP Colt Router Set With Fixed and Plunge Base: amzn.to/2mHP1wY
Bosch Edge Guide: amzn.to/2uRRKs2
Bosch Bushings Set: amzn.to/2JUNRYb
Centering Cone: amzn.to/2OjgOAf
MY CNC MACHINES (I highly recommend both)
Bescutter Laser’s Website: bit.ly/bescutter
Avid CNCs of all shapes and sizes: bit.ly/3cdKdqA
----
Camera Gear:
Lumix GH5-s and main lens: amzn.to/2J49F7m
30mm Macro Lens: amzn.to/2GJXtTT
15mm Lens: amzn.to/2NafUox
50mm Lens I use for product shots: amzn.to/2mehs5y
Microphone: amzn.to/2IGjKIa
Lav Microphone: amzn.to/2Nb8SzY
Gimbal: amzn.to/2s9ZV0F
2nd CAMERA Canon 70d: amzn.to/2FiCEDq
Tripod: amzn.to/2HasNvK
Slider: amzn.to/2oNucSd
24MM Wide Angle/Macro Lens: amzn.to/2oSzzjh
50MM f/1.8 for those tight shots: amzn.to/2tpAoVm
10-18mm Lens for the wide shots: amzn.to/2FZrhNM
*The Katz-Moses Store (Suizan Saws, Stop Block, Dovetail Jig and more):* bit.ly/KMWstore20
*Most of the Marking Knives in the Video* lddy.no/g4y3
*Matt Estlea’s Shop* bit.ly/MattEstleaShop
*Kiridashi from Chrisman Knives (he is a radical maker give him a follow)* instagram.com/b.chrismanknives/
*Great in depth video about better accuracy in woodworking* th-cam.com/video/goUc74RQRus/w-d-xo.html
I cannot believe marking knives aren’t sold as commonly (and right next to) all measuring, marking, and ubiquitous tools everywhere. I imagine these are common knowledge to woodworkers but I can’t believe I never knew how amazingly perfect these are for many things. I just got one and will hardly ever rely on a pencil again. Marking knives just rose to my every day carry list (in the shop). Thank you so much for this informative and comprehensive video. You have a great ability to cover topics in a way that seems to anticipate what people don’t know they don’t know. Well done!
A good marking knife and square is a such a huge quality of life upgrade for woodworking.
I’ve actually been looking at aprons recently, super stoked to see the one you’re bringing out!
Just got mine yesterday. Love it so far!
I made my own kiridashi out of an old meat grinder blade and I love it! It's especially easy to sharpen as it is a single bevel design so it's the same concept as sharpening your chisels or plane irons.
Good morning. I am a beginner woodworker stuck home in quarantine here in New Jersey. Your channel is one of the ones I enjoy most to learn about many different aspects of the craft. You are much appreciated, I’m sure, by many and I just wanted to say THANK YOU Sir!
I hope you make one for lefties. Thank you for all the videos. very inspiring. I just got started in wood working and I really appreciate the videos you put out makes the adventure much a little less scary. Thanks again
Make your own marking knife. A fun project and you can start to make your own tools as well.
I happened to watch a video of yours yesterday from 2018 and I must say... BRAVO on the difference between quality from then until now. All the B Roll footage and music you do now compared to before... Such a great difference!
A retractable spear point with long stiff thin metal two bevels on one side, flat back would be my ideal. It closes in your pocket and you pop it out when you need it.
Thanks for sharing and keeping our sanity at this crazy time. Stay safe, be 💪 and keep the health of your family
Hey Jonathan! Greetings from the home of Narex tools! 🙂Czech Republic! I'm so glad to see that tool in yours hands!
We in Czech Republic have a tendency of underrating Narex after what they gave us during the "dark ages" of socialism. Their chisels are great! I got their mortice chisels for a fraction of price of Veritas and I just love them! They stay sharp for ages and you can make mortices into marble I guess :)
Abosolutely LOVE your channel for expert advice and quality. I wanted to give a shout out to your incredible film crew (and behind the scenes support) who can demonstrate the accuracy for fine woodworking. Not an easy task and you guys excel.
This is pure gold! When I saw how you can return to the same line by just dragging your knife along until it lands into cut mark, it just clicked! It's one of those things that "you don't know that you don't know", a kind of blind spot that hinders you and you don't even know how to approach this. THANK YOU!
Also, can you please post your PayPal for one-time donations?
Didn’t realize i needed this video till I saw it. Thanks for a very clear explanation of the reasons for your choices and excellent demonstrations of how you use each knife. I am now a convert from pencils to knives.
I recently bought one of the Swann Morton marking knives. I put one of the sharp, new blades in it, and decided since it was handy to use it to cut open a plastic bag that a parallel clamp came in. I missed. So, the first thing I did with my new marking knife was plunge it right into my left thumb. Thankfully, it wasn't bad, just bled a good bit and took a couple weeks to heal up. It was a nice, clean cut, though!
bloodgain that was the first thing I ever did with my first knife, but mine was pretty deep lol
Hi Jonathon. Love your channel. Really like the way you mention other content creators. Keep up the great work.
Small wonderful world
Hey Jonathan, thanks for getting some content out white we are all sheltered in our homes.
I find a double bevel blade is more prone to wondering with the grain when marking, well...inline with the grain. A single bevel blade has a natural ‘push’ towards the flat and well...towards the edge of your square. I actually swap between them as needed, sometimes even just using a utility knife.
I have a Narex single bevel thick blade and have no complaints. Gives me an accurate mark every time.
As a side note I have a set of Exacto knives for the thinner marks as in dovetail marking.
Yet another vital discussion on must have tools. You could spend 30 mins on sandpaper and make it informative and entertaining! A proper gentlemen always has a collection of the necessities: whiskey, wine, watches, marking knives, ...
Never seen one of those before, but it looks so handy! Need a tool, make a tool! It was the perfect first project for my tin can forge! This kept me passionate and busy in those quarantine times, so thank you very much!
Shipping within hours. Impressive. Can't wait to try the dovetail jig.
In my opinion you forgot two important things:
1. Always walk away from your fingers. If it cuts into wood it will cut into skin too.
2. Cut on the waste side of the workpiece. If the blade moves, you won't damage the part you want to keep.
This is exactly the advice I needed to get accurate marks -- thank you for the great content -- subbed!
Love it. Love the table saw trick. “Netflix and quarantine” - now you triggered me!
Thank you, Jonathan. I’ve been in the market for a marking knife and was becoming overwhelmed with all the different styles. Appreciate you.
Also can’t wait to get an apron!
Thank You!!!!!!!!! This was actually very informative. Being a tool maker and machinist with a first love of wood working this makes me happy. Who says you can't cut wood within a .001 : ). Great video!!!!!!!!!!!!!!!!
Wow this video came just in time! I just got your dovetail jigs yesterday and I need a marking knife!
Nice! I can't wait to see what you create
Great info~! A nicely condensed marking knife education. Thanks much~!
"If it's not Micro Machines its not the real thing!"
I love marking knives
Man I am glad you made this video! Thanks.
Thanks so much brother!
Nice points
Soooo stoked for the apron!!!!
Fantastic explanation. Thanks.
Thanks for the video Jonathan. Be safe out there man!
Some awesome info in this video. I definitely picked up some great tips!
Thanks bud!
Ha ha ha, "tips"...
Knife tips?
Excellent and very informative information........thanks!!!
Don't you just love this quarantine time ! I'll be good with it until I run out of wood .
Lumber stores are "essential businesses" so you are good. I love it. It is like being trapped in paradise!
I've heard said that trees are a renewable resource. Go cut one or two down, here and there, and plant new ones. Remember to give the wood time to dry (approx. 1year per inch thickness for most woods and the average climate), after slabbing it, before it is needed. (Dont wait until you run out of stock.)
Mark Schneider I’m not worried. I hear that my house is made of wood if I get real dole on wood.
thank you Katz .
Good collection of the tool!
I have a problem 🥰
:-))
@@katzmosestools no problem, as long as you do a round of sharpening before all of them are dull. Of course a couple of those have replaceable blades, so you just have to wait on the "big brown truck" when you load your last new blade.
THE most underrated tool in the workshop! I recently built a hardwood frame 2×3m to hang a synthetic green wall in a college staff room. Timber was 65mm Mountain Ash, so very straight and clean grained. My basic marking knife and a decent combo square meant that the half lap corners lined up within fractions of a millimetre and dead square, which was my big concern. It's also really handy to slice out any dags from the inside corners of hand sawn cuts.
Does the apron come in black? (Very slimming!) :-)
Great tips! Thanks for sharing 👍
Excellent, thank you!
Most definitely interested in one of those aprons
Along with the ingenious tools intelligence and skill to use them should be there
I tried making a marking knife from a 12" tablesaw blade that had lost some carbide tips to a nail or screw. The body of the blade is high strength steel and pretty tough, and it sharpens up fine but doesn't stay sharp quite as long as another marking knife I have. But the chipped blade was free and I had the time to cut out a blade and sharpen it up.
This could give you an opportunity to try unusual shapes that you think you might work better with. Then decide if you want to spend for a good blade steel.
Great tips! Thanks!
I ended up getting a 100 dollar kiridashi knife, and it's my favorite knife I've ever owned. Also, apparently kiridashis can be used like a block plane as well, although I still have to perfect that technique
Ok...I need a marking knife! lol
I like to mark just about anything softer than steel with a homemade scribe. The point is shaped like a knife tip but backwards. This way it doesn't wander off the line, and it can make a line as deep as you would ever want. In fact, you can score all the way through thin fiberboard or 1/4" plywood with enough passes. It's basically a single toothed saw. When marking across the grain, you have keep the first pass or two light to break the fibers without ripping them, then you can go to town.
You could try this with an ordinary knife turned backwards, but the angle of the handle will be wrong.
I’ve never owned a marking knife and have long told myself I should get one. But one question I have is, why doesn’t anyone just use an exacto-knife. Cheap, replaceable blades, sharp. I get that it’s not perfect for every situation, but just curious. Thanks for making awesome, informative content!
Adam Brummett : an exacto blade and handle are just the small/thin to really sever the grains with control. You end up using to much pressure which can lead to blade wonder or riding up the edge of your straight edge
Was just about to pick up a new apron. I’ll wait for yours. Sign me up!
Cool. Good tips and tricks, but what I’m most excited about is your work apron. BUT, what will it’s name be? The Katz-Moses Super Utility Protection Cape. You’re welcome 😉
Counseling and medication can help with you your marking knife problem!! Super informative video.
hahahaha thanks bud
What problem? Any he doesn't use can be give-away items.
For marking with the grain I use a rolling paper cutter. It does not tend to follow the grain the same as a standard marking knife.
Looking forward to hearing more about your shop apron with the square holder. I hope there will be an option for a marking knife holder. I currently do not carry a marking knife in my shop apron because I do not have a safe way to store it in a pocket, either blade up or blade down. I saw your leather sheath. I may need to find something like that.
I love the explanation of using the marking knife to get super accurate rip cuts. Just be sure that you put the line on the correct side of the blade. It looked like to me (assuming standard width blade) your cut was going to be 17/8" and not the 2 inches that you wanted. ;) Not being a hater, 'cuz I love your videos and I'm learning a lot. I just know that with wood working, you have be careful and think about everything all the time.
Thanks for the info! 😃👍🏻👊🏻
Definitely have a sale for an apron from me when you make them available, will go good with the dovetail jig I got from you haha 😁 stay safe during this crazy time
Hey JOHNATHAN KATZ MOSES I saw in one video you paused to think was the opposite of proud "wood" be n it JUST CAME TO ME! I think it works real world and shop talk but "SHY". Watchya think?
Also I been trying to get my ol lady to sew some extra shit on my apron so that's funny your coming out with some lmao! Bought a leather needle for her machine months ago n still nothing lol!
"Netflix and quarantine"..?
Mate, you ARE our Netflix and quarantine..
Carry on.. ;)
Lol thanks
awesome and great tips as usual tnx
Darn you! I just got an apron! Now I’m gonna have 2
hahahaha. You'll love it
When is it out?
Wonderful demonstration. I usually start the marks to hard and wander. Will use your suggestions in my future projects. Can't wait for the apron.
"pre order' ?
When we're in production and see a semi accurate delivery date I will do a preorder for sure
@@katzmosestools thank you
0
You Def know your stuff
I use a chip carving knife for marking, blade is thin, super sharp and rigid.. it doesn't flex so it doesn't wander. Exacto knives are flexible which does tend to wander.
Seiko 5 is great too...
I just finished Netflix... that's why I'm watching you. haha
Johnathan, I'm asking this same question of a number of youtuber craftsmen. I have an old, cheap table saw, a miter slide saw, a few cheap hand tools, and a desire to learn and hone my skills. What is the very first tool/jig/accessory I should build? Buy?
I want one from Matt, but they are all sold out... build more Matt!!
I’ve always just used scalpers.
Don't forget the left handed wood workers. When you make the shop appron....!
ooooh new apron interesting!
I’d like to see a video of fret saw vs coping saw and how to find one that isn’t garbage
I could honestly use a kiridashi with the type of work I do. Guitar picks don’t bevel themselves lol
I love marking knives too, i just want to make an entire wall to store marking knives.
Stay safe too pal.
I didn't see the marker blade kit listed
I hope the apron has the square pocket sewn instead of riveted.
Yes you do have an obsession it’s called MKA. Consider attending marking knife anonymous meetings. 🤣
wanted to know if there's any downsides to using something like an xacto blade or maybe a utility knife/snap-blade knifes as a marking knife
Great video! Thanks for sharing. Any chance you could do one of all the different saws? Suizan, dovetail, pull and push stroke etc.. I'm a beginner and would like to know what I should get for my first saw. I need one that could be multipurpose, mostly dovetails and flush cuts and I'm on a little bit of a budget.
I have several saw videos to check out. Cheers
My pencil lines make awful dovetails... I use a Stanley disposable just like Paul Sellers uses. Similar to the metal swan morton. Had a flat back and it just sits on the shelf now.
Great breakdown, plenty of useful info, especially the rip-cut marking trick! (I can see myself using that going forward) I have a Narex-style marking knife blade I received as a Christmas gift, and I've yet to craft a handle for it - you've given me all the incentive necessary to get out into the shop and make that project a priority.
For the budget minded, do you need more than an exacto or box cutting knife? Not pretty, but do they work just as well?
They do not. Too flexible and too sharp
@@katzmosestools thanks for answering
I am a surgeon, Jon. Nothing surpasses a #15 disposable scapel. Very cheap, throw away when they get dull. About $11 on Amazon for ten. If you want a bigger blade, use #10.
Wrong.
@4:32... Just the tip? Got it.
My go to marking knife is the Stanley folder like Paul Sellers uses. Also a replaceable blade. I had not seen the slider like you have, before. Looks like a great option for a thin replaceable blade marking knife. If you dont already have a link to where to find it and the replacement blades (I'll go look after posting this comment), please share? Thank you.
I found the link, thanks.
I'm looking at graduating to marking knives, thanks for the tips. I think I may have to have more than one. (Oh, No!) Thumbs up to crush a troll.
If you could have only one dovetail jig, which one would you get?
Thanks Jonathan! Really enjoyed this videos as I've been pondering a marking knife. Question: early in your video you mentioned a custom made blade from your buddy, did you say made the handle with Koa?
Thanks for the informative video. At first I was like "it's a marking knife..." And as I was watching it, "oh....didn't think of that...." :)
Really interesting. I make my own knives with worn out files, usually the half round file type. I tend to leave some of the filing teeth on it for grip, you just need a grinder and you have it. I will admit though that my work is crude compared to yours but it still nice to use. Stay safe we're on lockdown here in the UK and at 66 I'm fine with it! Thank God for so many good people.
When I started watching this video I thought, "I should make one out of a file."
Of subject a bit, I posed a question a while back about the stumpy brass hammer you use for Dovetails. Can you add that stumpy brass mallet to your products? I can't find one like that anywhere.
Where we can purchase marking knife
The apron... a left handed one?
Why didn’t you include the Stanley that Paul Sellers uses?
dont suppose youll have a lefty version of that Apron?
He just came out with presale video and yes he did.
Although I can see the true benefit of a marking knife. Will a Stanley utility knife work in a pinch?
Sure
wheres the apron already! I have the same apron but I want that holder!