Mercedes-Benz W140 S-Class Replace Upper Control Arms.

แชร์
ฝัง
  • เผยแพร่เมื่อ 7 ม.ค. 2025

ความคิดเห็น • 14

  • @rogernemos795
    @rogernemos795 4 หลายเดือนก่อน

    Very carefully done job. Amazing video!

    • @ka-benz
      @ka-benz  4 หลายเดือนก่อน

      Thank You.

  • @alekscarguy5153
    @alekscarguy5153 5 หลายเดือนก่อน

    Thank you for the Video, doing the Upper control arms next!😊

    • @ka-benz
      @ka-benz  5 หลายเดือนก่อน

      Good luck.

  • @williampliss9879
    @williampliss9879 29 วันที่ผ่านมา

    Hello all, I am planning on replacing my lower front control arms on a W140 because they are noisy as heck! Just wondering if I should also replace the upper front control arms at the same time. It’s hard to visually determine the effectiveness of the upper front control arm when on the vehicle. But if I do switch them out, what is the primary benefit or two? Will there be a Satisfying reward for having done it? 😅. Best regards 🤙🏻

    • @ka-benz
      @ka-benz  29 วันที่ผ่านมา

      I had a noisy squeaky sound for my ball joint which turned out to be the upper ball joint. I would check the upper ball joint with a mirror all the way around for cracks or to see if it's leaking. If not then you could disconnect the bolt connecting the ball joint to the spindle then grab the ball joint and see how easy it moves. It should be very stiff if it's in good condition. You could also check the bushings on the back and see if they're rotten or dried out.Good luck.

  • @gtejada34
    @gtejada34 ปีที่แล้ว

    Great Vid. can you please tell me what manual you use? Thank you in advance.

    • @ka-benz
      @ka-benz  ปีที่แล้ว

      Thanks. I use the MB EPC/WIS Disc set that I got on eBay for about $20. I then print off pages as needed.

  • @lovedcc818
    @lovedcc818 หลายเดือนก่อน

    when torqueing the 4 bolts to the frame and the single bolt to the spindle do you have to have the suspension loaded?

    • @ka-benz
      @ka-benz  หลายเดือนก่อน +1

      Yes, but the 4 bolts not needed.

    • @lovedcc818
      @lovedcc818 หลายเดือนก่อน

      @ka-benz is the loaded position the full weight on the tires, or just high enough to fit the bolt and torque?

    • @ka-benz
      @ka-benz  หลายเดือนก่อน

      @@lovedcc818 Full weight on tiers and or jack up lower control arm.

  • @Mohamed61110
    @Mohamed61110 ปีที่แล้ว

    What could cause the w140 pulling right side on low speeds?

    • @ka-benz
      @ka-benz  ปีที่แล้ว

      Maybe tie rods. You could get a wheel alignment.