SPECDTUNING INSTALLATION VIDEO:2003-2007 INFINITI G35 COUPE PROJECTOR HEADLIGHTS

แชร์
ฝัง

ความคิดเห็น • 61

  • @silverspringhamir2478
    @silverspringhamir2478 8 ปีที่แล้ว +11

    He makes disconnecting the harness (at 2:30) so frrrrreeaaaking easy. Whereas, it took my friend and I 25 minutes to remove his harness on his Z lol.

  • @dabitat
    @dabitat 5 ปีที่แล้ว +1

    is there a reason you didn't connect the extra power/ground wire? that's extremely useful information, considering it powers the whole other half of the light.

  • @firstpurewater
    @firstpurewater 6 ปีที่แล้ว +6

    Can we have a tutorial for the black and white wires for this.

  • @dontajones5994
    @dontajones5994 5 ปีที่แล้ว +2

    There are 2 screws on adjacent sides of the main bulb housing to adjust the bulb itself. Took me one year to figure it out :)
    Also do I have to wire the halos up separately cause the wires for mine are hanging

  • @anurallah
    @anurallah 12 ปีที่แล้ว

    this video is the best. it sure help me change my ballast and headlight and i had no idea about car stuff. thanks alot man

  • @mrfireawaynow
    @mrfireawaynow 9 ปีที่แล้ว +3

    Great video for bumper cover and headlight removal. Very detailed and helpful. Thanks very much!

  • @ryanquinones925
    @ryanquinones925 3 ปีที่แล้ว +1

    I bought these headlights and the black and white wires for the halo are not connected to anything and I don’t know what to do

  • @alpha6five528
    @alpha6five528 6 ปีที่แล้ว +4

    Is it me or did he COMPLETELY skip the fog light part ??? WTH ! The factory lights don’t work or FIT aim these lights ! Anyone got any advise ?? I’m trying to put HID’s in the fogs . Thanks

    • @couchmayne4351
      @couchmayne4351 5 ปีที่แล้ว +3

      Alpha6five Same issue here I have an extra cable hanging it’s detailed vid but missed parts but unfortunately none of these vids were helpful enough this is as good as it gets the other vids are fuckin ass guys have shitty angles and skip almost the entire process and just worry about how they talk and views

  • @Specdtuninginfo
    @Specdtuninginfo  12 ปีที่แล้ว

    we're glad that we were able to help you solve your problem!

    • @dabitat
      @dabitat 5 ปีที่แล้ว

      finish the video

  • @enlightenedmiiind4790
    @enlightenedmiiind4790 4 ปีที่แล้ว +1

    I just got my first G35 and I’ve got the same headlights but over half my bulbs are out, are the bulbs in this headlight replaceable? Also would love to know what kind of headlights they are

    • @OmenGoldhelm
      @OmenGoldhelm 4 ปีที่แล้ว

      Same my 5 mini bulbs are out and Idk what kind of bulbs I need to replace them

    • @autograph415
      @autograph415 3 ปีที่แล้ว

      @@OmenGoldhelm h4s

    • @xzess12gaming78
      @xzess12gaming78 ปีที่แล้ว

      @@OmenGoldhelm hey did you ever fix that ? I’m having the same problem the 5 little lights don’t work

  • @austinbradley3411
    @austinbradley3411 8 ปีที่แล้ว

    put everything on just like video but the low beam on passenger side blinks when I'm driving sometimes and some times it works perfect and ideas would be awesome

  • @TheAZchambers
    @TheAZchambers 12 ปีที่แล้ว

    well im gunna be trying a similar install today hope it goes smoothly

  • @hero-tu6up
    @hero-tu6up 5 ปีที่แล้ว +1

    does anyone know how to replace the small bulbs? mine went out

  • @andrewgonzalez6145
    @andrewgonzalez6145 4 ปีที่แล้ว +1

    Do these fit the 04 sedan?

  • @daBaydestrian510
    @daBaydestrian510 12 ปีที่แล้ว

    do you need to remove the bumper just to change the light bulb?

  • @JollyFlys
    @JollyFlys 9 ปีที่แล้ว

    I can't get the Low Beams to turn on, I installed everything correctly and I even checked on the original lights to see if the ballast or bulb was the problem but they worked on the original headlight. I think there's something wrong with the wiring harness that is connected to the ballast. Any Idea why this is happening??

    • @jmcco333
      @jmcco333 9 ปีที่แล้ว

      ballast probably bad

    • @Specdtuninginfo
      @Specdtuninginfo  9 ปีที่แล้ว

      +Leo Leyva We are sorry to hear that. You should check the wiring make sure nothing was damaged during installation. If all the wiring on the headlights look fine and undamaged, you might be having a problem with the headlight resistor.

  • @rvcg2023
    @rvcg2023 2 ปีที่แล้ว

    Bro there is two loose wires we’re do they go?

  • @Sankaramanchi9
    @Sankaramanchi9 12 ปีที่แล้ว

    Ideally, this is the same process for OEM 2007 Projector headlights right?

  • @Specdtuninginfo
    @Specdtuninginfo  12 ปีที่แล้ว

    well it would depend was your old HID 6k? if it was the same then you should be okay but you really shouldn't need a new ballest.

  • @sukhb5
    @sukhb5 10 ปีที่แล้ว +4

    I installed these lights but the halos rings dont work. everything else works just fine though

    • @jiovanicontreras7947
      @jiovanicontreras7947 5 ปีที่แล้ว

      Same, thing happen to me but It was because I didn't click them together all the way.

    • @aceblund3134
      @aceblund3134 3 ปีที่แล้ว

      same..

  • @grembf158
    @grembf158 8 ปีที่แล้ว

    how do you adjust them up and down?? that's what I wanna know!

  • @djcandle3863
    @djcandle3863 8 ปีที่แล้ว

    My LED's and Halo ring have completely stopped working on my G35 after only 3 months. Is there a fix for this?

    • @jbarah05
      @jbarah05 8 ปีที่แล้ว

      djcandle check if the resistor didn't blow out if it did then you'll have to replace it

  • @pokeman6501
    @pokeman6501 10 ปีที่แล้ว

    Hi spec d i bought these halo lights for my 2004 g35 coupe and for the halo and the leds to work it says connect the black wire to the grounding and the white wire to the white wire to the negative umm what does that exactly mean i have no idea where to connect them to other than that at the moment i have no other issues its a great product but i have a car meet this saturday and i have tried to call the company but no answer day after day and i would really like to show these lights off thanks

    • @firstpurewater
      @firstpurewater 6 ปีที่แล้ว

      Helping my buddy out and they need a tutorial for tat.

  • @tbskirk
    @tbskirk 12 ปีที่แล้ว

    do you have a way to buy things online ? or mabey ebay auctions/sales so we can purchase online ?

  • @KEE64N
    @KEE64N 11 ปีที่แล้ว

    bought ccfl angel eye dual halo & LED DRL Projector h/light for 2003 g35 coupe. came with no HID lamp but specs say should beukd be D2S bought D2s replacment bulbs. will it work with factory ballast?

  • @najeebraz2219
    @najeebraz2219 11 ปีที่แล้ว +1

    You forgot to ground the ballast to the car!!! A piece of ground wire should be connected to one of the screws on the ballast and to the housing of the car.

  • @chewyrice2484
    @chewyrice2484 10 หลายเดือนก่อน

    How do I wire the halo?

  • @MoldRS
    @MoldRS 11 ปีที่แล้ว

    How much do you think it would cost to get these installed profesionally at a place?

  • @nolandavis3677
    @nolandavis3677 2 ปีที่แล้ว

    What abt the hanging wires

  • @Owashing1
    @Owashing1 10 ปีที่แล้ว

    Great tutorial.

  • @theblackmomba1
    @theblackmomba1 12 ปีที่แล้ว

    do we need a new ballest if we want to install 6000k hids???

  • @Specdtuninginfo
    @Specdtuninginfo  12 ปีที่แล้ว

    yes correct

  • @Specdtuninginfo
    @Specdtuninginfo  11 ปีที่แล้ว +1

    How to wire the Halos is showed in a different video, How to wire Halos and LED

    • @jeffreyxiong205
      @jeffreyxiong205 6 ปีที่แล้ว

      Spec D Tuning is it possible to change from halogens headlights to xenon?

  • @thadmurray6208
    @thadmurray6208 8 ปีที่แล้ว

    i thought this was the non hid model?

  • @KUBBI7488
    @KUBBI7488 6 ปีที่แล้ว

    i got exact same lights !

  • @Specdtuninginfo
    @Specdtuninginfo  11 ปีที่แล้ว

    No factory ballast will not work with after market ones.

  • @soznmusic
    @soznmusic 5 ปีที่แล้ว

    i guess there's no way to aim these?

  • @BlackKen302
    @BlackKen302 10 ปีที่แล้ว

    I'm go try this..

  • @Specdtuninginfo
    @Specdtuninginfo  11 ปีที่แล้ว +1

    aound $100 more or less

  • @rodneyakjohnson451
    @rodneyakjohnson451 6 ปีที่แล้ว

    They make it seem so easy the harness was a bitch ... not long enough for u to disconnect

  • @Specdtuninginfo
    @Specdtuninginfo  12 ปีที่แล้ว

    please visit k2motor.com for this product

  • @myownman91
    @myownman91 10 ปีที่แล้ว

    Heard those lights are cheaply made garbage..

    • @Andy-wb4qm
      @Andy-wb4qm 10 ปีที่แล้ว +2

      they are, never sits right, and the led's die out within months of your lucky a couple of years

  • @abdulalawaz5
    @abdulalawaz5 12 ปีที่แล้ว +2

    scary voice!!

  • @Deathmetalmechanic
    @Deathmetalmechanic 3 ปีที่แล้ว

    Don't buy these junk lights. Trust me, i already did

  • @najeebraz2219
    @najeebraz2219 11 ปีที่แล้ว

    You forgot to ground the ballast to the car!!! A piece of ground wire should be connected to one of the screws on the ballast and to the housing of the car.