Alex next time you put up those signs, spray windex on the surface before you put them on, then you can adjust them any way you'd like to line them up, then you can use your credit card to get rid of any bubbles,I put a lot of those signs up all the time
Alex when you're applying stickers to your truck. Spray the door with sudsy water, then spray the sticker with sudsy water on the sticky part. Then place the sticker on the door to the perfect position,. It will be able to slide around, due to the sudsy water it will not stick. . Then use a squeegee or your credit card, a squeegee preferred. And squeegee out the water and the air bubbles and let dry in the hot sun and you're good to go in about an hour
Before you apply a decal spray the area with windex. This will allow the decal to slide around so you can adjust it and it’s easier to get the bubbles out. The windex will dry up in a short while and the decal will be smooth and secure.
Here's a tip with the signs. Wet the truck side and place the sign on the truck with the backing removed. The sign will be movable. Push out all the air bubbles center to edge. When the water evaporates the sign will adhere to the truck.
Alex, when you put those decals on, first spray the door lightly with soapy water. Allows you to move and reposition the decal before they stick. Then use your card to squeegee the water out. Been doing it for years that way.
Hi Alex I'm so pleased for you things are moving along for you i really hope that things go well in this new venture As always God bless you and keep safe out there 🙋♂️🇬🇧
Quick question, since you haul non CDL, why do you get dually trucks? Wouldn't you be better off with a single rear wheel so it would be lighter and therefore increase your actual load capacity?
"First two drivers didn't work out"... he laughs. "They gave me a lease return"... he laughs. "A rusty driveshaft"... he laughs. "I don't work very well under pressure"... laughs again. Guys, he is scared - really scared. To be successful, you run on the thin edge of disaster - every day. Let's all wish him luck!
I am scared I bought all new equipment a month ago thinking it was going to be a piece of cake to start ..... I'm still stuck not able to get started because I ran out of money but I'm skeptical To late to feel like that I have the trailer and the Ford Gotta apply for my M/ C number I'm not paying 20%- 25% to someone else just because they got the number or finding the loads ....i rather wait to get my numbers and start keeping all the cash for me .
its a problem. Good friend of mine got 1 semi. Made money bought 2 more (he still drove first) bought another. Drivers just quit. (Mostly at home location, one 1400 miles away) I took a few last minute runs. In end he had to let 3 trucks go, just kept his original, till he sold it. It’s a lot of work running drivers.
Holy hell Alex! Content being produced is awesome even 15 mins still didn't expect a vid until next week!! The quality of angles and edits are legit! Congrats on the success 😎😎
Alex, for putting on the signs, spray the truck with washer solvent and water put the sign on and then use the card to smooth everything out, it allows you to move it into the spot you want and then get the bubbles out easily
Spray bottle with water and a few drops of baby shampoo, and a graphics squgee, makes installing vinyl graphics so easy. You can move them around and then press the water out with the squgee
Hey Bro, when you put your signs on, squirt bottle of water with a couple drops of joy dish soap and your credit card. Make sure the whole thing is wet (sticky side). No bubbles, no wrinkles. Perfect install every time. I know you’ll redo those...
When loading vehicles, if you need extra clearance to not high center, lower the tongue jack (leave trailer hitched to truck) and jack up the front of the trailer. This will lower the rear of the trailer and make the ramps less steep giving the vehicle you're loading more clearance.
Alex, use a pin or needle on those air bubbles and you'll look like a pro. You could have that info printed on magnetic material if you want to go undercover. They don't blow off, but you can't put them over Bondo. Also, why don't you leave that tailgate in your garage? Save you about 50 pounds. Might help when the DOT guy weighs you out at 26,030.Keep it coming'! If I was under 80 I'd be driving for you.
Buying new tires for the truck is a tax write off for enterprise. Rotating them is not. They get more back on the taxes than they do on three or four rotations.
Congratulations Alex I hope your new driver works out it’s always hard to find a qualified driver that has the same drive that you do. As far as a truck name how about Ford Flintstone?
Drivers will be the death of you, kidding of course, sorta lol , put a pin hole in the bubble and push the air out, also you can use a wetting agent , to put on first then squeeze out the wetting agent , I think it was called frog juice I use to use.
Mark Bremmer when I was doing signs and banners we didn’t use soap and water to apply it because some soap will leave a residue behind and the edges would lift sometimes , frog juice never had an issue with it. We have cleaned with soap and water or tsp but used alcohol to clean off the soap and degreasers , never tried it with just soap and water . I’m sure it will work for applying it.
Use a razor to pop the bubbles also you can spray a little dawn and water on the door to spread the sticker around and use your driver’s license as you pull the backing off to flatten the sticker as you go
There is going to be a lot of quality people looking for work because of this pandemic, I think this is going to help you stay home more yet still hit/exceed your yearly money goals.
23 years old no kids. In construction but rn its really slow and dont know if im able to save up how i want to . Got great experience driving & loading , unloading w construction . Most definitely want to give this a try . Thanks alot bro keep posting 👌🙏
Drive something that (they) can see you in a down pour. No accident trucks have reflectors. If your driving a red truck, in court (they) can't say (they) did not see you. That is a nice looking truck.
"A Bull at the gate" is how you might be described Alex.......applying those vinyl signs requires care and patience to produce a good result......otherwise just don't bother , because creased and/or bubble-ridden signs look crap and defeat the purpose!
Hey you can buy a roll of that window insulation from Home Depot it's silver and you can cut it to size only cost me $40 for the roll I believe and it covers all of my back windows and I have some left
I have semi truck flatbed experience, currently working for a mid size carrier. I’m on the waiting list and they told me December. You need a driver let me know. I am registered on your site
Glad to see you are expanding, hopefully more home time. Suggestion is trailers. You are buying a couple every year? Find a better company. Demand better alignment of axles, other stuff. Contact companies known for quality. Ask price for 2+ with shorter hitch, extras you need. IMO in a yr you should be CONSIDERING buying a truck. Maintenance should not be great on a 140k hotshot truck. (Especially if you figure cooling without engine running) A 2 yr old one ton dually with 140k, documented maintenance, never pulled over 14k should have a good value. IIRC you said lease is $14k mileage every 60k miles? With tires, other. That doesn’t sound bad. But as you hopefully reduce miles you drive. It should be worth it buying off lease, or maybe new?
Yes Alex You are correct anyone that sees you is going to assumed you are doped up or got some screws missing.... you are do used to videoing that you forget .... next time you peel another sticker wet a rag and start peeling and running the rag side to side as you peel .
Love the content dude pro tip for installing vinyls... Spray windex on the door put your sticker on and Squeegee it with your pilot card! Boom done simple and smooth
You happen to be looking for another driver at all any time soon? Not just “any other driver” either... but a PROFESSIONAL Seasoned 10 year Veteran Class A driver... just curious... I’ve trucked for years but have been curious about Hotshot’n. I own my Own W900, however I’ve been thinking of parking her for a little bit.
Why doesn't enterprise order the trucks with the puck system included? Seems like a no brainer unless it isnt as good. My FOrd has the puck system I tow 5th wheel and gooseneck all the time. NO rails.
Congratulations on the expansion. Hope everything works out for you Alex. You sure deserve everything you get. Working hard for your money and your chicks.... not for free. Lol.
I would drive for you out of the Toronto area. Just starting training on wreckers but I'll make the switch. Use to load trains with dodge Rams and challengers as well
I always us magnetic signs. That way if I need to switch trucks I simply move the signs. If running down the road without the trailer, I remove the signs.
Hey Alex, I have seen a few hot shots that use magnetic stickers. they seem to work fine at least I tried to remove one of them and they actually take some effort.
Rusty driveshaft comment at 6:40. Alex, just so you are aware, the brake rotors on a car or truck (or anything that has brake rotors for that matter) will rust if it has sat out after a rain and hasn't been driven in a day or two. Go look through the rims on cars or trucks (or trailers) where you can see the rotors and you'll see some rust starting to form even after only a day of sitting sometimes. The rear rotors are typically worse and have more buildup and worse wear patterns on the rear brake pads and rotors in general because people don't press on their brake pedal hard enough (every now and then at least) or have proper maintenance done on their brakes but, also more rust buildup after rain and no driving for a few days. It's not uncommon at all. The rusty driveshaft is common to a lot of vehicles.
Hey Alex, I'm interested in getting into hotshot, I've been binge-watching your videos... Can you give me any advice or tips? Yes, i know this video is a year old...
13:00 (damn I have a lot of comments...lol). Honestly? I'd take the truck to a detailer.....let 'em shine it up good inside and out.....and let THEM put on the decals. THEY'LL put that sucker on tight and neat......and probably not even charge you. They'll just be happy you brought a big truck in to them to detail for whatever they charge. 👍
6:45 into the video. Fly the new driver up there. Let HIM do the hookup and tow for you. That way you can 'test-drive' your driver. And see how flexible he is when you call him and say 'you're on a flight to so-and-so at 8pm....get your ass ready'.
D S ya me too got on the list 28 days ago and talked to them yesterday there saying after January 1 2020 but it’s still a good idea to be on that list even though it’s gonna be longer than what they thought about a month ago
@@scrapmanindustries Big deal when it is 95 or 25 you have to run it and you cant afford to stay in hotels and end up with anything left over. And you cant afford driver turnover and you also cant afford to pay them well and it is against law to do 1099.
@@westnash you really don't "need" to run it when its 95 or 25 for that matter. some of us don't even got AC so running the truck when its hot ain't doing nothing anyway.
Alex, why didn’t you check with enterprise in the Texas area for a truck. Indiana isn’t the only enterprise that does this and I’m pretty sure you mentioned that before . I have got one from mobile, AL. I got my second one in CO when I moved up there as well. Now I’m in a semi tho. This week was the first time I ever grossed over $10k
APP CALLED SKIPLAGGED for airfare lowest youll find. (Atlanta to Miami to Atlanta that's round trip airfare straight shot $58 I've gotten it as low as 48. Atlanta's Los Angeles $94 round trip)
Alex let's be smart about this. Buy the ticket find 2 loads and roll
Hello tow piglet from CANADA ! I’m CDL driver from Canada. Enjoy your video’s. Thank you for sharing your experiences.
Alex next time you put up those signs, spray windex on the surface before you put them on, then you can adjust them any way you'd like to line them up, then you can use your credit card to get rid of any bubbles,I put a lot of those signs up all the time
LOL, Alex, "The Most over caffeinated man on TH-cam!"
Alex is on speed!!!! And a total nut job.
Be ready coronavirus check points, as you come into a new state, buy a thermometer. know your body temperature.
David Berkovits not sure about the speed.
@@davidberkovits9738 so true
Can I be one of your driver
Alex when you're applying stickers to your truck. Spray the door with sudsy water, then spray the sticker with sudsy water on the sticky part. Then place the sticker on the door to the perfect position,. It will be able to slide around, due to the sudsy water it will not stick. . Then use a squeegee or your credit card, a squeegee preferred. And squeegee out the water and the air bubbles and let dry in the hot sun and you're good to go in about an hour
Bro! your enthusiasm is contagious!!! Love your videos, good luck on everything.
Before you apply a decal spray the area with windex. This will allow the decal to slide around so you can adjust it and it’s easier to get the bubbles out. The windex will dry up in a short while and the decal will be smooth and secure.
Here's a tip with the signs. Wet the truck side and place the sign on the truck with the backing removed. The sign will be movable. Push out all the air bubbles center to edge. When the water evaporates the sign will adhere to the truck.
Alex, when you put those decals on, first spray the door lightly with soapy water. Allows you to move and reposition the decal before they stick. Then use your card to squeegee the water out. Been doing it for years that way.
Hi Alex I'm so pleased for you things are moving along for you i really hope that things go well in this new venture
As always God bless you and keep safe out there 🙋♂️🇬🇧
Quick question, since you haul non CDL, why do you get dually trucks? Wouldn't you be better off with a single rear wheel so it would be lighter and therefore increase your actual load capacity?
You will see driver retention is the hardest part of a small transport business.
Last week Jimmy the bull pellechia got canned for no good reason if you still need a driver. He's on TH-cam ,u can find him under rxmuscle.
Glad u finally realized FORDS are the way to go
At 6:02...."oh look, squirrel". Come on Tow Piglet, stay on point. ;-)
"First two drivers didn't work out"... he laughs. "They gave me a lease return"... he laughs. "A rusty driveshaft"... he laughs. "I don't work very well under pressure"... laughs again. Guys, he is scared - really scared. To be successful, you run on the thin edge of disaster - every day.
Let's all wish him luck!
He is not scared that's his character... easy going guy
So not underestimate his potential
I am scared I bought all new equipment a month ago thinking it was going to be a piece of cake to start ..... I'm still stuck not able to get started because I ran out of money but I'm skeptical
To late to feel like that I have the trailer and the Ford
Gotta apply for my M/ C number
I'm not paying 20%- 25% to someone else just because they got the number or finding the loads ....i rather wait to get my numbers and start keeping all the cash for me .
Five truck/trailer combos sounds about right for one guy to manage from home. Might need an administrative assistant.
5 Combos financed by someone with no money is a disaster waiting to happen....drivers will quit as they cant make any $$$$ and payments will continue.
its a problem. Good friend of mine got 1 semi. Made money bought 2 more (he still drove first) bought another. Drivers just quit. (Mostly at home location, one 1400 miles away) I took a few last minute runs. In end he had to let 3 trucks go, just kept his original, till he sold it. It’s a lot of work running drivers.
Holy hell Alex! Content being produced is awesome even 15 mins still didn't expect a vid until next week!! The quality of angles and edits are legit! Congrats on the success 😎😎
Alex, for putting on the signs, spray the truck with washer solvent and water put the sign on and then use the card to smooth everything out, it allows you to move it into the spot you want and then get the bubbles out easily
Alex you are. a nut! Thanks for sharing a fun day with us! Hope your driver does you good and everything works out!
Spray bottle with water and a few drops of baby shampoo, and a graphics squgee, makes installing vinyl graphics so easy.
You can move them around and then press the water out with the squgee
Glad you’re deciding to spend more time at home. Your family will appreciate it. Hope it all works out!
Dude your killing it! Been watching sense last year happy for you
Nice,hopefully all works out ....love your attitude, to try and start company...
Hey Bro, when you put your signs on, squirt bottle of water with a couple drops of joy dish soap and your credit card. Make sure the whole thing is wet (sticky side). No bubbles, no wrinkles. Perfect install every time. I know you’ll redo those...
when putting on decals spray some soapy water (not too soapy) on the back then stick it on, makes it easier to get rid of the bubbles
When you stick those signs on you should sprayed your truck with soapy water first. Then you can move the sign a little and squeegee the bubbles out.
congratulations bruh good job your my inspiration as an owner op/business runner
Spray some soapy water behind the decal then you can move it some and then squeeze the bubbles out easily
When loading vehicles, if you need extra clearance to not high center, lower the tongue jack (leave trailer hitched to truck) and jack up the front of the trailer. This will lower the rear of the trailer and make the ramps less steep giving the vehicle you're loading more clearance.
That Silver is sharp - get yourself one when your lease is up.
Next time you do decals, use spray foam window cleaner on the door, then you can manipulate the decal with a squeeze of some sort, no bubbles.
Alex, use a pin or needle on those air bubbles and you'll look like a pro. You could have that info printed on magnetic material if you want to go undercover. They don't blow off, but you can't put them over Bondo. Also, why don't you leave that tailgate in your garage? Save you about 50 pounds. Might help when the DOT guy weighs you out at 26,030.Keep it coming'! If I was under 80 I'd be driving for you.
Buying new tires for the truck is a tax write off for enterprise. Rotating them is not. They get more back on the taxes than they do on three or four rotations.
Congratulations TP hope it all works out for you and the new driver.
Congratulations TP
Congratulations Alex I hope your new driver works out it’s always hard to find a qualified driver that has the same drive that you do. As far as a truck name how about Ford Flintstone?
Drivers will be the death of you, kidding of course, sorta lol , put a pin hole in the bubble and push the air out, also you can use a wetting agent , to put on first then squeeze out the wetting agent , I think it was called frog juice I use to use.
Progress only moving forward 💪👍📣🤹♂️
@@steveriley1600 use soap and water when installing those signs. It'll work fine.
Mark Bremmer when I was doing signs and banners we didn’t use soap and water to apply it because some soap will leave a residue behind and the edges would lift sometimes , frog juice never had an issue with it. We have cleaned with soap and water or tsp but used alcohol to clean off the soap and degreasers , never tried it with just soap and water . I’m sure it will work for applying it.
Bro for driving all day on the road you have such a badass attitude! Love your channel
Eddie Cantoran Alex is on drugs man and probably drinks a lot off duty! At least drinks a lot of Coors!!!!
Congratulations Alex, your business is going up
Hi from Sonora, Mexico
Now you must assign numbers to the trucks, TP01, TP02.......
Hahahahah you’re wearing me out, kiddo!
I’m about to have a REGULAR cab 350 dually. Thanks for all your input!
Congratulations on the business move. Best if luck.
Use a razor to pop the bubbles also you can spray a little dawn and water on the door to spread the sticker around and use your driver’s license as you pull the backing off to flatten the sticker as you go
There is going to be a lot of quality people looking for work because of this pandemic, I think this is going to help you stay home more yet still hit/exceed your yearly money goals.
23 years old no kids. In construction but rn its really slow and dont know if im able to save up how i want to . Got great experience driving & loading , unloading w construction . Most definitely want to give this a try . Thanks alot bro keep posting 👌🙏
Drive something that (they) can see you in a down pour. No accident trucks have reflectors. If your driving a red truck, in court (they) can't say (they) did not see you. That is a nice looking truck.
On our 350s we flip front tires inside out every 5-6k. made them last a bit longer because we have feathering issues on the outside edges on our 2wds
"A Bull at the gate" is how you might be described Alex.......applying those vinyl signs requires care and patience to produce a good result......otherwise just don't bother , because creased and/or bubble-ridden signs look crap and defeat the purpose!
Take a safety pin to the bubbles then use card for the decals.
Hey you can buy a roll of that window insulation from Home Depot it's silver and you can cut it to size only cost me $40 for the roll I believe and it covers all of my back windows and I have some left
Gr8 stuff man/Congrats. Respect
Thanks Alex for taking my truck I am on the waiting list damn no start for me
If you customize your rails(ramp), make longer , and maybe wider you wont have that problem . I dk im just thinking out loud. (Lowest point problem)
You should have called me. I live near the enterprise location in Indiana. About an hour down the road. I am ready to go as a non cdl driver.
I have semi truck flatbed experience, currently working for a mid size carrier. I’m on the waiting list and they told me December. You need a driver let me know. I am registered on your site
Rotate the spare into the mix as well.
You have a great attitude for success!! I love that you are succeeding already! And if we ever get around each other I’d love to talk with you!
Can you do an update on the new 2020 10 speed?
Glad to see you are expanding, hopefully more home time. Suggestion is trailers. You are buying a couple every year? Find a better company. Demand better alignment of axles, other stuff. Contact companies known for quality. Ask price for 2+ with shorter hitch, extras you need.
IMO in a yr you should be CONSIDERING buying a truck. Maintenance should not be great on a 140k hotshot truck. (Especially if you figure cooling without engine running)
A 2 yr old one ton dually with 140k, documented maintenance, never pulled over 14k should have a good value.
IIRC you said lease is $14k mileage every 60k miles? With tires, other. That doesn’t sound bad. But as you hopefully reduce miles you drive. It should be worth it buying off lease, or maybe new?
Yes Alex
You are correct anyone that sees you is going to assumed you are doped up or got some screws missing.... you are do used to videoing that you forget .... next time you peel another sticker wet a rag and start peeling and running the rag side to side as you peel .
Should have got magnets 🧲 for the signs. Also easy on the coke
th-cam.com/video/wZGa9beMGho/w-d-xo.html
Maybe it's you that needs to take it easy on the "coke" being that magnets don't stick to ALUMINUM.... WOW.. lol
@@TowPiglet love the 2nd comment on that video as well. It really backs up my come joke lol
Alex Alex Alex just peel 1 inch around the border it's way easier to take off. Love your videos keep it up
I’m following your lead brother. 🙏🏾💯
Dude you're so funny, lol . Thank you I learned a few things yet I did trucking in the past in Canada.
Congrats!!! Keep America moving
Congratulations.... I'm watching and learning cause hopefully soon I'll be able to get into Hotshots...
#TEXAS
I told you coach, put me in I’m ready to play!!
Love the content dude pro tip for installing vinyls... Spray windex on the door put your sticker on and Squeegee it with your pilot card! Boom done simple and smooth
You happen to be looking for another driver at all any time soon? Not just “any other driver” either... but a PROFESSIONAL Seasoned 10 year Veteran Class A driver... just curious... I’ve trucked for years but have been curious about Hotshot’n. I own my Own W900, however I’ve been thinking of parking her for a little bit.
...good luck to you with the 2nd truck and driver.
Why doesn't enterprise order the trucks with the puck system included? Seems like a no brainer unless it isnt as good. My FOrd has the puck system I tow 5th wheel and gooseneck all the time. NO rails.
Congratulations on the expansion. Hope everything works out for you Alex. You sure deserve everything you get. Working hard for your money and your chicks.... not for free. Lol.
Congrats Alex you doing a great job my friend
I would drive for you out of the Toronto area. Just starting training on wreckers but I'll make the switch. Use to load trains with dodge Rams and challengers as well
I always us magnetic signs. That way if I need to switch trucks I simply move the signs. If running down the road without the trailer, I remove the signs.
Magnetic signs won't work on fords aluminum bodies
Mark Ramsey
What year did they go to aluminum bodies? The magnetic signs i have do just fine on my 2006 and 2007 ford trucks.
In 15 or 16 not sure
Hey Alex, I have seen a few hot shots that use magnetic stickers. they seem to work fine at least I tried to remove one of them and they actually take some effort.
Looks great and you got it all under control
Rusty driveshaft comment at 6:40. Alex, just so you are aware, the brake rotors on a car or truck (or anything that has brake rotors for that matter) will rust if it has sat out after a rain and hasn't been driven in a day or two. Go look through the rims on cars or trucks (or trailers) where you can see the rotors and you'll see some rust starting to form even after only a day of sitting sometimes. The rear rotors are typically worse and have more buildup and worse wear patterns on the rear brake pads and rotors in general because people don't press on their brake pedal hard enough (every now and then at least) or have proper maintenance done on their brakes but, also more rust buildup after rain and no driving for a few days. It's not uncommon at all. The rusty driveshaft is common to a lot of vehicles.
Man Alex is the hardest working hotshot driver I’ve ever seen.
Lmao seriously?!? The hardest working hotshots don't have time to make TH-cam videos they're getting after that money...
Works way harder at losing money.
It's awesome that you try and give new possible drivers a chance at the business. Not many will bother. What about a dispatcher?
Congratulations on growing your business
Dan’s hitch in Elkhart stocks the weathertech window shades.
Perhaps watch a couple youtube videos on how to properly apply decals.
Hey Alex, I'm interested in getting into hotshot, I've been binge-watching your videos... Can you give me any advice or tips? Yes, i know this video is a year old...
the light at the end of a tunnel is a train lol
I really like the idea of leasing a truck. One day, at a time.
13:00 (damn I have a lot of comments...lol). Honestly? I'd take the truck to a detailer.....let 'em shine it up good inside and out.....and let THEM put on the decals. THEY'LL put that sucker on tight and neat......and probably not even charge you. They'll just be happy you brought a big truck in to them to detail for whatever they charge. 👍
Alex if you were doing this 6 months ago, I would have jumped onboard with ya.
Shoot I been driving for 3 months just don't get paid on time , I drive my ass off non cdl
Just weighing in fly him in and get a load for him going to Texas.
Hey Alex. I’m ready to ride! CDL driver here. Let me know if you getting another truck!
6:45 into the video. Fly the new driver up there. Let HIM do the hookup and tow for you. That way you can 'test-drive' your driver. And see how flexible he is when you call him and say 'you're on a flight to so-and-so at 8pm....get your ass ready'.
Checking spare tire! That a boy!
Good video Alex
Enterprise said they wouldn't have anything available until 2021, what they told me. You're lucky if you got a truck with their shortage of trucks
They told me the don't know when they are getting any trucks in.
D S they have a list that I am on
With the Factory’s shutdown due to Covid Enterprise is very short on trucks
D S ya me too got on the list 28 days ago and talked to them yesterday there saying after January 1 2020 but it’s still a good idea to be on that list even though it’s gonna be longer than what they thought about a month ago
Hey Alex! What does it take to be a driver for you? CDL A going to 3 years with it.
I wish you would tell us about the availability of enterprise rentals in 2021.
OH man I want that truck!!!
Wow! Awesome!! I really like the color too!!!
One at fault wreck and its all over. Why would any driver want to sleep in the back seat of a pickup truck?
Some guys put a comfortable bed back there and works perfectly fine for them.
@@rayh.9973 not a dot approved sleeper and the engine not designed to idle
@@westnash as long as the vehicle is off it counts as off duty. that changed in like 2013. get with the times man.
@@scrapmanindustries Big deal when it is 95 or 25 you have to run it and you cant afford to stay in hotels and end up with anything left over. And you cant afford driver turnover and you also cant afford to pay them well and it is against law to do 1099.
@@westnash you really don't "need" to run it when its 95 or 25 for that matter. some of us don't even got AC so running the truck when its hot ain't doing nothing anyway.
Alex, why didn’t you check with enterprise in the Texas area for a truck. Indiana isn’t the only enterprise that does this and I’m pretty sure you mentioned that before . I have got one from mobile, AL. I got my second one in CO when I moved up there as well. Now I’m in a semi tho. This week was the first time I ever grossed over $10k
"NO EXCUSES NO REGRETS"
APP CALLED SKIPLAGGED for airfare lowest youll find. (Atlanta to Miami to Atlanta that's round trip airfare straight shot $58 I've gotten it as low as 48. Atlanta's Los Angeles $94 round trip)