Read and watch the full review now at GunsAmerica: www.gunsamerica.com/digest/the-new-glock/ Interested in the Holosun optic? Use code "Opinion5" for 5% off your entire OpticsPlanet.com order Holosun HS507C Red Dot Sight: bit.ly/2IrbyHC Holosun at OpticsPlanet: bit.ly/2rJujzS OpticsPlanet: bit.ly/2bGtRcR
The cut out on the front strap was a leftover from the military contract model. Before you laugh at it remember that magazines get stuck when they're covered in sand and dirt. So an opening to help pull them out of the magwell is necessary. I realize there was no need to leave it on the civilian model but that's why it was there.
Yes I bought this a few months back and there is a definitive difference for sure between the gen 4 and the gen 5 mos trigger an the gun itself over all, very sweet gun, definitely one I'll never get rid of. Great vid👍🇺🇸
I only had to adjust my Holosun 9 clicks up and 7 right. Zeroed it at 7 yards with half a mag. Adjusted it for 20 yards with 4 more shots. Great tight groups. This thing has the best stock Glock trigger in the history of mankind. They may just achieve that “Perfection” in another generation or two!
Looks like that pistol can "go to work" for home defense for sure. Glock is starting to pay much more attention to their customers, and I do not own the Gen 5.... for the concerns that you covered, but I do love my 2 Glock 19X Pistols. Great Video Justin! Beretta Sr
I hate to use a term like "best Glock ever made", but that is my thought on this one. If I could own just one Glock.... (wait, that might be better saved for the title of a video!)
Felipe Ramirez Hi Sir, I just wanted to say that the Glocks will last for 30 years or more, and I have head there are some problems with the CZ pistols after a couple years of shooting. Either Glock is a long term winner, I am not a MOS shooter, but if you are that's your pistol. If you not a MOS shooter then the Glock 45 or 19X are my top picks. Beretta Sr.
I have a gen 2 glock, still works flawlessly.Thought I wouldn’t be interested in another glock, but this one is nice. Trigger seems super improved. Thx for the video.
I purchased one Friday and love it. Glock corrected the things that I didn't like about the gen 5 19 and I will be ordering an RMR on Monday. Now if Glock will just start shipping with their kit the correct length screws for the RMR.
Glock changed the design of the breach face which lends to a better more positive ejection. That’s why your seeing a “stronger” ejection pattern. They did it with all the Gen 5 models. Two thumbs up for that!!
A while back I went to the shop fully planning on getting a gen 5 G19, That cutout bothered me so much i bought the G17 instead. The cutout is far enough down it doesn't bother me and its a great shooter but after seeing this I really want this version.
My perfect Glock...the 19mos frame with the trigger guard and paddle releases of the VP9 and the slide of the G45. That would be Glock Perfection for ME.
I like the front serrations, but make sure you keep your trigger finger out of the trigger guard when using them & keep your off hand fingers well clear of the muzzle. A certain member of my military unit only has 9 fingers now from using front serrations & he was by means inexperienced, just rushed & in the fog of war.
I’m very glad they took out that mag-strip hole. And the MOS option is a great move forward. All they need to do now is get rid of The Glock Knuckle and after that they can keep the same design for another 20 years 👍
Just purchased a 507C, I have a G19 MOS and I am being told the plates that come with the pistol wont hold up. Should I get a more sturdy aftermarket plate option for this optic?
That's exactly how the Gen5 should have been from the first day. I think i'll take the G17MOS and buy also G34 slide to get another option. Thx Justin for another great video
Picked mine up this week. I'm going with the Vortex Venom on mine. I typically run Talons on my Glocks, but i love this grip texture. May just leave the Talon off this one. Good video. Keep em coming!
Interested in the HOLOSUN optic used here? Use my discount code at Optics Planet! Use code "Opinion5" for 5% off your entire OpticsPlanet.com order Holosun HS507C Red Dot Sight: bit.ly/2IrbyHC Holosun at OpticsPlanet: bit.ly/2rJujzS OpticsPlanet: bit.ly/2bGtRcR
It’s about time glock got it right ! home run glock . No need for a lot of after market improvement. Not even sure it needs talon installed. Just my opinion lol! My gen 4 has been a great performance piece but it’s finding a new home , after 😎10,000 flawless rounds .
When (if...) Glock decides to make it in 40S&W, it will be the perfect EDC for me... in the mean time my G23 gen3 Slide milled RMR will have to do. :>)
Great video. I thought about this model for myself. Still undecided. One thing to note: If you hit the white flapper with a .40, it would swing over every single time with ease. Feel free to hate on the .40, but that’s a fact.
I press check all the time. Is that a bad habit? I prefer real-time assurance over memory. Ever forget where you put your car keys? Lol! Great video as usual.
What do you mean the gen 5 mag isn't backward compadable to gen 4? The only issue is with the 17 gen 5 mags in a 19x. Gen 5 mags work in prior generations.
This is going to be the first handgun I will ever by, it has everything I would ever want in a handgun. I will just stipple it for I always like to customize a minimum of my guns and for better grip and aesthetics. What can you ask more from a handgun?
So that cutout. When they flared the magazine well on the Gen 5 they removed the ability to pinch the magazines on the side to strip the magazine. Why you'd want to strip a magazine would include a failure to extract where the next round feeds against the empty case. You have to strip the magazine to clear the malfunction. Since you can't really grip the magazines on the side anymore, the cutout (which existed on earlier Glocks) allows you to get some leverage when coupled with the extended baseplates on Gen 5 magazines. So thumb up in the gap at the back of the frame and index finger up in the cutout to strip the magazine (I make my index finger into a hook shape and rest it on the lip of the baseplate). By removing the cutout you're now left with hoping you can hook your index finger on the extended baseplate. I've tried it and it sort of works, but since the baseplates don't extend passed the frontstrap it doesn't seem super reliable. The cutout also gave you the ability to hook the magazine on something if you were clearing the above malfunction one handed. So Glock listened to the customers, but I'm not sure the customers thought this through. I'd argue you never needed the flaring in the first place. Glock magwells have always had a bevel inside and the magazines are tapered. The angle at which you have to insert the magazine to have it not insert on a Glock without the flared magwell is extreme. I tested a Gen 3 versus a Gen 5 in this regard and it's really not significant. Glock could have had cutouts in the flaring, but frankly that would get close to defeating the supposed purpose of the flaring.
You should feel honored. Glock tailor made an entire line of pistols just for you. In this case, their solution introduced a problem that affected more users than the one they were trying to cure.
@@JustinOpinionChannel not sure if you're being funny or snarky and if the latter why. A number of people did dislike the feel of the cutout but a number were okay with it as well (it did exist before). Being able to clear malfunctions can be important. Glock should have found a way to address both concerns. But hey, it's just my opinion.
Some snark, but also genuine confusion as to why they would nearly ruin the feel of the grip for most shooters based on the very low likelihood of a specific type of malfunction. Especially when they say that their guns don't malfunction... ;-) I've never had one wedged in any gun THAT tight.
@@JustinOpinionChannel clearing a failure to feed is a potentially big issue as you can't just fix it with a tap, rack, and bang. Most defensive oriented classes will cover this. You have to strip the magazine and sometimes the round that is pressed forward into the fired case provides both more friction and by being pushed forward slightly (as it has started to move out of the magazine) it can get hung up in the magwell. Getting a little more leverage on the magazine can help. You should be able to do this on a pistol without much trouble and it's why a number of makers have ways to assist with this (P320 for example has cutouts and a number have small indentations). It's not a very likely malfunction, but it generally causes no issue to account for. However, those cutouts are typically on the sides of the grip and don't present the same issue. Again, if you didn't have the flaring you don't really need the front cutout because Glock baseplates extend passed the bottom of the grip. I also don't know if the feel was almost ruined for most shooters. I've had a number of people shoot Gen 5s and never comment on it, but I don't deny it annoys the hell out of some people. If this was "tailor made" for me it wouldn't have the flaring and it wouldn't have the cutout.
Yep, I get it. Not trying to be a snot about it at all. Just a matter of preferences I suppose - and I like the grip better without the cutout. Y'know, if everyone would just carry a bottle opener on their key ring like my dad always did, this would be a non-issue!
An evolution! And it is what glock does best. Obviously the FBI wanted a way to strip a magazine if required. My only suggestion would be for glock to widen the sides of the magazine base plate so it sits flush with the edge of the flared magwell with a slight angle on it like so / So it can be grabbed and stripped easily if needed. Being a machinst I've worked on injection molding dies. Because you would be making the die larger you could modify the original die ;-) It would also be nice to see 40 caliber and 357 sig offered as glock is missing out on law enforcement sales by not offering these calibers.
Justin; Glock has already made some sample "Gen 5" guns in 40 S&W for the Brazilians; I do not know if they got a contract but pictures of several of the samples have made it onto social media. A 2 pin with 40 S&W is possible.
Can’t find one yet. Gun shops are pushing their old inventory. I can get a Gen 4 G19 or G17 or a Gen 5 with the undercut hole. But the Gen 5 G19 or G17 MOS FS nowhere to be found. I guess I’ll have to wait
I'm definitely in for a G45, that said, GLOCK could really start undercutting the trigger-guard, not that we can't do that ourselves but still. Good little handgun and the trigger is definitely better on the Gen5 than the Gen4, pleased they got rid of the front-strap relief cut for stripping magazines.
I think this is perfection, perfect grip, perfect slide, and improved trigger. what are they going to do with the gen 6 now? I shot many glocks but I personally don't own any glock for the sake of not owning one. However the MOS FS is so good its hard to resist.
I like the MOS, but I really think it's annoying they don't make the G45 in MOS but they make both the G17 gen 4 and 5 in MOS and G34 in three variant.. really...
I once had that problem, but my dept's instructor told me I had too much finger on the trigger. As I pulled trigger, I also pulled the muzzle in same direction. Try using your finger tip ( finger print area). You probably will return to center.
I had wondered what all the reviews I saw were talking about. I bought one of these used, and really had no idea what it was. I just knew MINE had front serrations. Mine didn't have a big cutout on the grip frame. And what's this little line on the top with the two screws all about? Can you tell I don't know much about Glocks?
Actually... putting your finger on the front of the trigger guard is the RIGHT WAY instead of shooting wrong... helps with RECOIL... along with whatever else
![[Live] : ONE 169 วันนี้!! "อนาโตลี vs อูมาร์"](http://i.ytimg.com/vi/IK3YZVWuFJg/mqdefault.jpg)
![Glock 19 Gen 5 MOS [REVIEW] : An In-Depth Look](/img/n.gif)
Read and watch the full review now at GunsAmerica: www.gunsamerica.com/digest/the-new-glock/
Interested in the Holosun optic?
Use code
"Opinion5" for 5% off your entire OpticsPlanet.com order
Holosun HS507C Red Dot Sight: bit.ly/2IrbyHC
Holosun at OpticsPlanet: bit.ly/2rJujzS
OpticsPlanet: bit.ly/2bGtRcR
The cut out on the front strap was a leftover from the military contract model. Before you laugh at it remember that magazines get stuck when they're covered in sand and dirt. So an opening to help pull them out of the magwell is necessary. I realize there was no need to leave it on the civilian model but that's why it was there.
Right on brother! Definitely loving the Gen 5 MOS. I thinks it’s what people were really waiting for in the Gen 5 family. Cheers!
KSGunGuy Did you pick one up bud?
Yep - they got it right with this one. When people realize how good it is, it will sell like crazy.
Maur Ice sure did!
Justin Opinion I 100% agree brother!
Justin Opinion shot you a PM in Facebook
Yes I bought this a few months back and there is a definitive difference for sure between the gen 4 and the gen 5 mos trigger an the gun itself over all, very sweet gun, definitely one I'll never get rid of. Great vid👍🇺🇸
Glad you finally mentioned the ambi dexterity. This is a game changer for many of us southpaws already familiar with the 19.
Have a gen 3 Glock 19 so now I am retraining myself for the mag release on my new gen 5.
I only had to adjust my Holosun 9 clicks up and 7 right. Zeroed it at 7 yards with half a mag. Adjusted it for 20 yards with 4 more shots. Great tight groups. This thing has the best stock Glock trigger in the history of mankind. They may just achieve that “Perfection” in another generation or two!
This gun has finally convinced me to buy my first Glock...Great 1st 100 review.
Looks like that pistol can "go to work" for home defense for sure. Glock is starting to pay much more attention to their customers, and I do not own the Gen 5.... for the concerns that you covered, but I do love my 2 Glock 19X Pistols. Great Video Justin!
Beretta Sr
I hate to use a term like "best Glock ever made", but that is my thought on this one. If I could own just one Glock.... (wait, that might be better saved for the title of a video!)
I can't make my mind between the 19x, 19g5mos and the cz p10c.
Felipe Ramirez Hi Sir, I just wanted to say that the Glocks will last for 30 years or more, and I have head there are some problems with the CZ pistols after a couple years of shooting. Either Glock is a long term winner, I am not a MOS shooter, but if you are that's your pistol. If you not a MOS shooter then the Glock 45 or 19X are my top picks. Beretta Sr.
I have a Glock 19x too I love it, but I gotta ask why do you have two?
Also, the rear sight on this model is placed further back on the slide giving you a slightly longer sight radius.
I have a gen 2 glock, still works flawlessly.Thought I wouldn’t be interested in another glock, but this one is nice. Trigger seems super improved. Thx for the video.
All optic compatible guns should have cowitness sights period
@@traymuse3810 LMAO
Why?
@@1776goodfight so you can cowitness
I got the 19x cuz its exactly what i wanted in a glock but i think that this is a perfect all around gun with the few gripes fixed...must have!
I purchased one Friday and love it. Glock corrected the things that I didn't like about the gen 5 19 and I will be ordering an RMR on Monday. Now if Glock will just start shipping with their kit the correct length screws for the RMR.
Glock changed the design of the breach face which lends to a better more positive ejection. That’s why your seeing a “stronger” ejection pattern. They did it with all the Gen 5 models. Two thumbs up for that!!
A while back I went to the shop fully planning on getting a gen 5 G19, That cutout bothered me so much i bought the G17 instead. The cutout is far enough down it doesn't bother me and its a great shooter but after seeing this I really want this version.
You just made me want this gun even more than I already did
My perfect Glock...the 19mos frame with the trigger guard and paddle releases of the VP9 and the slide of the G45. That would be Glock Perfection for ME.
The paddle release is the first thing to fail.Watch some vids on it
I like the front serrations, but make sure you keep your trigger finger out of the trigger guard when using them & keep your off hand fingers well clear of the muzzle. A certain member of my military unit only has 9 fingers now from using front serrations & he was by means inexperienced, just rushed & in the fog of war.
Even when shooting left you are still a better shot then I am. Thanks for the upload.
Picked up my first Glock (43x) for my edc. I love it. I’m really want to get a 19 gen 5 but can’t justify it quite yet
You shoot that new Gen 5 MOS Glock better than your 1911s, Justin !
That's one of the better looking Glock's I have seen.
It also looks like there is a more positive ejection of the empty casing of the round. I like it!! Great video too. Please keep it coming!!
I’m very glad they took out that mag-strip hole. And the MOS option is a great move forward. All they need to do now is get rid of The Glock Knuckle and after that they can keep the same design for another 20 years 👍
Yea one of my favorites so far!!! Thank you!!! 🦅🇺🇸🦅🇺🇸
Just picked one up new for $679.99 that included a Vortex Venom 6 MOA red dot. Great deal and i love it!
j james so uhhh where can I find this deal???
j james I'm thinking about getting this one or the 45mos
Just purchased a 507C, I have a G19 MOS and I am being told the plates that come with the pistol wont hold up. Should I get a more sturdy aftermarket plate option for this optic?
Excellent review darling. Long live the duck on the treadmill and Glockamole.
Just got my Glock 23 Gen5 MOS being I’m a .40 guy. I wasn’t a Glock person until I shot the Gen5. So, I have a Glock 19 Gen5 MOS on order as well!
That's exactly how the Gen5 should have been from the first day. I think i'll take the G17MOS and buy also G34 slide to get another option. Thx Justin for another great video
Just got my first glock the other day (g17 gen 5 mos) and absolutely love it! I'm hoping to get a 19x next. Thanks for the video
I'm running a holosun 507c on a g19 also. Amazing optic.
Not a Glock fanboy but this is one I might buy. Finally got it almost right, still need some proper steel sights.
The sights are the only negative I can find. And those are easily replaced.
I’ll be getting mine soon along with the Trijicon RMR. Glock perfection!
One last thing Glock needs to do, the trigger guard undercut.
I definitely agree with that hate how it sits on my middle finger it not the most comfortable
Dan, say it louder for the people in the back. I hope GLOCK does do the undercuts☝🏾 ...the thumb shelf would be good too.
I own one of these and I agree as well. That would be a nice and doable thing from factory
Picked mine up this week. I'm going with the Vortex Venom on mine. I typically run Talons on my Glocks, but i love this grip texture. May just leave the Talon off this one. Good video. Keep em coming!
Holosun all the way! I’m buying this gun for sure. Thank you glock for taking away the cut out and giving us more for our money! 🙌
Wich model of holosun used this video
Interested in the HOLOSUN optic used here? Use my discount code at Optics Planet!
Use code "Opinion5" for 5% off your entire OpticsPlanet.com order
Holosun HS507C Red Dot Sight: bit.ly/2IrbyHC
Holosun at OpticsPlanet: bit.ly/2rJujzS
OpticsPlanet: bit.ly/2bGtRcR
It's nice seeing someone shooting with single-handed... both hands
It’s about time glock got it right ! home run glock . No need for a lot of after market improvement. Not even sure it needs talon installed. Just my opinion lol! My gen 4 has been a great performance piece but it’s finding a new home , after 😎10,000 flawless rounds .
i just bought da G43x Mos ... came wit optic red dot !! 👌
Bravo to Glock for the MOS changes in gen 5. Make it standard . I want to send my gen 5 g19 9mm back and trade it for MOS. Thumbs up, review.
Thats a bad ass Glock!
This is the one I have been most excited about.
Love your taste in music and car's, love your ZL1 I have a slightly modified c5zo6.
When (if...) Glock decides to make it in 40S&W, it will be the perfect EDC for me... in the mean time my G23 gen3 Slide milled RMR will have to do. :>)
Great video. I thought about this model for myself. Still undecided. One thing to note:
If you hit the white flapper with a .40, it would swing over every single time with ease. Feel free to hate on the .40, but that’s a fact.
I just might be picking up my first Glock.
Me too
KSHE radio in St Louis used to have a DJ named Frank O. Pinion...I like your review.
Can’t wait to purchase at some point lol!. Great trigger reset!.
Maybe I didn't understand you, but Gen 5 19 mags do work in Gen 4 19's.
I press check all the time. Is that a bad habit? I prefer real-time assurance over memory. Ever forget where you put your car keys? Lol! Great video as usual.
Finally the glock I've been waiting for
What do you mean the gen 5 mag isn't backward compadable to gen 4? The only issue is with the 17 gen 5 mags in a 19x. Gen 5 mags work in prior generations.
You're absolutely right! I have had the 19X on my brain lately and had it in my head for the Gen 4s. Sorry for the error.
Is the Glock 19 Mo's compatible with the caa micro Roni gen4x
Glock is not quite there yet.
Still need to make the serrations more aggressive and get rid of the "Slick 50" slide finish.
This is going to be the first handgun I will ever by, it has everything I would ever want in a handgun. I will just stipple it for I always like to customize a minimum of my guns and for better grip and aesthetics. What can you ask more from a handgun?
Don't forget unlike all the other generations; the gen 5 has a crowned barrel/muzzle.
Very happy with mine.
Yep, this will be my next gun purchase.
Love that gun I put the holosun on it and wow this pistol is great.
Which holosun model did you get?
New watcher.. great video. Good detail and enough shooting clip to enjoy watching every minute.
YOU JUST GOT A NEW SUBSCRIBER!
So that cutout. When they flared the magazine well on the Gen 5 they removed the ability to pinch the magazines on the side to strip the magazine. Why you'd want to strip a magazine would include a failure to extract where the next round feeds against the empty case. You have to strip the magazine to clear the malfunction. Since you can't really grip the magazines on the side anymore, the cutout (which existed on earlier Glocks) allows you to get some leverage when coupled with the extended baseplates on Gen 5 magazines. So thumb up in the gap at the back of the frame and index finger up in the cutout to strip the magazine (I make my index finger into a hook shape and rest it on the lip of the baseplate). By removing the cutout you're now left with hoping you can hook your index finger on the extended baseplate. I've tried it and it sort of works, but since the baseplates don't extend passed the frontstrap it doesn't seem super reliable. The cutout also gave you the ability to hook the magazine on something if you were clearing the above malfunction one handed. So Glock listened to the customers, but I'm not sure the customers thought this through.
I'd argue you never needed the flaring in the first place. Glock magwells have always had a bevel inside and the magazines are tapered. The angle at which you have to insert the magazine to have it not insert on a Glock without the flared magwell is extreme. I tested a Gen 3 versus a Gen 5 in this regard and it's really not significant. Glock could have had cutouts in the flaring, but frankly that would get close to defeating the supposed purpose of the flaring.
You should feel honored. Glock tailor made an entire line of pistols just for you. In this case, their solution introduced a problem that affected more users than the one they were trying to cure.
@@JustinOpinionChannel not sure if you're being funny or snarky and if the latter why. A number of people did dislike the feel of the cutout but a number were okay with it as well (it did exist before). Being able to clear malfunctions can be important. Glock should have found a way to address both concerns. But hey, it's just my opinion.
Some snark, but also genuine confusion as to why they would nearly ruin the feel of the grip for most shooters based on the very low likelihood of a specific type of malfunction. Especially when they say that their guns don't malfunction... ;-) I've never had one wedged in any gun THAT tight.
@@JustinOpinionChannel clearing a failure to feed is a potentially big issue as you can't just fix it with a tap, rack, and bang. Most defensive oriented classes will cover this. You have to strip the magazine and sometimes the round that is pressed forward into the fired case provides both more friction and by being pushed forward slightly (as it has started to move out of the magazine) it can get hung up in the magwell. Getting a little more leverage on the magazine can help. You should be able to do this on a pistol without much trouble and it's why a number of makers have ways to assist with this (P320 for example has cutouts and a number have small indentations). It's not a very likely malfunction, but it generally causes no issue to account for. However, those cutouts are typically on the sides of the grip and don't present the same issue.
Again, if you didn't have the flaring you don't really need the front cutout because Glock baseplates extend passed the bottom of the grip. I also don't know if the feel was almost ruined for most shooters. I've had a number of people shoot Gen 5s and never comment on it, but I don't deny it annoys the hell out of some people. If this was "tailor made" for me it wouldn't have the flaring and it wouldn't have the cutout.
Yep, I get it. Not trying to be a snot about it at all. Just a matter of preferences I suppose - and I like the grip better without the cutout. Y'know, if everyone would just carry a bottle opener on their key ring like my dad always did, this would be a non-issue!
The FS for Factory Sights. And the NS for nigh sights. Just a correction brother.
That opening sequence looks like Sonny Crockett from 1986 firing that Glock!
-OG, the Taufledermaus Channel
Nope. He used a Bren Ten in the Season 2 episode at the range. PS: I own an original Bren Ten. I have 3 mags. It slices and dices just fine.
Great Video! Love that Shirt! God Bless!
LOL, thanks. It's from my friends at GunFunny. Thanks for watching and commenting.
Can you do a red dot review with this gun? Maybe for 3-4 most popular red dots out there?
Good suggestion.
Good idea. I'm going to be picking one of these up this weekend
An evolution! And it is what glock does best.
Obviously the FBI wanted a way to strip a magazine if required.
My only suggestion would be for glock to widen the sides of the magazine base plate so it sits flush with the edge of the flared magwell with a slight angle on it like so /
So it can be grabbed and stripped easily if needed.
Being a machinst I've worked on injection molding dies.
Because you would be making the die larger you could modify the original die ;-)
It would also be nice to see 40 caliber and 357 sig offered as glock is missing out on law enforcement sales by not offering these calibers.
Pick of the gen 5s 👌🏿
Justin; Glock has already made some sample "Gen 5" guns in 40 S&W for the Brazilians; I do not know if they got a contract but pictures of several of the samples have made it onto social media. A 2 pin with 40 S&W is possible.
I've also seen pictures of Elvis waving from the window of a UFO. I'll hold out for something a bit more tangible... ;-)
www.thefirearmblog.com/blog/2018/01/19/gen5-glock-22-sao-paulo/
I opted to get an FN 509 Tactical instead because it came with suppressor height night sights and a threaded barrel where this does not.
Can’t find one yet. Gun shops are pushing their old inventory. I can get a Gen 4 G19 or G17 or a Gen 5 with the undercut hole. But the Gen 5 G19 or G17 MOS FS nowhere to be found. I guess I’ll have to wait
I'm definitely in for a G45, that said, GLOCK could really start undercutting the trigger-guard, not that we can't do that ourselves but still. Good little handgun and the trigger is definitely better on the Gen5 than the Gen4, pleased they got rid of the front-strap relief cut for stripping magazines.
Thank You in advance 😊
I wish Glock would make this exact model without the MOS but keep all the same upgrades
Yes, this should have the gen 5 to begin with
They do now
I just bought one without MOS
@@kennymac1911 Yeah Same here now a year later
Отличный пистолет, Glock 19 gen5 как по мне идеальное соотношение всех характеристик стрелкового ручного оружия
Which exactly Holosun sight did you put on the Glock?
I'm happy with my gen 4 it doesn't matter is a glock.
Hey, Would you please advice to me, how to get a Glock 19 Gen 5 for home defense to California residence.
I think this is perfection, perfect grip, perfect slide, and improved trigger. what are they going to do with the gen 6 now? I shot many glocks but I personally don't own any glock for the sake of not owning one. However the MOS FS is so good its hard to resist.
The glock I’ve been waiting for
Great review
I like the MOS, but I really think it's annoying they don't make the G45 in MOS but they make both the G17 gen 4 and 5 in MOS and G34 in three variant.. really...
it very accurately shoots to the left
Sight was off
I once had that problem, but my dept's instructor told me I had too much finger on the trigger. As I pulled trigger, I also pulled the muzzle in same direction. Try using your finger tip ( finger print area). You probably will return to center.
Very nice indeed
Great video
Good stuff, very informative and much appreciated!
Glad it was helpful!
@@JustinOpinionChannel you always provide us tons of useful information, keep this content coming!
I wish they fixed the cut out on the non MOS versions.
What model Holosun optic is this?
S&W needs to release a M&P version of this with option for thumb safety.
1900stratoliner why a thumb safety? You can’t keep your finger off the trigger until ready to shoot? DOA handguns don’t need a thumb safety!
Which brand and model of red dot you are using?
I think you are holosun but which model of holosun
yeah I'm buying this hopefully be the end of this year ima save my penny's
I had wondered what all the reviews I saw were talking about. I bought one of these used, and really had no idea what it was. I just knew MINE had front serrations. Mine didn't have a big cutout on the grip frame. And what's this little line on the top with the two screws all about? Can you tell I don't know much about Glocks?
What a great review!
Finally the perfect glock
I’m not digging the front slide serrations on Glock pistols. Good video.
I want one. Looks good
I think I'll stick with my glock 20 and 27
I like that there's no cutout in the front of the magwell
Incredible!!! 👏🏻👏🏻👏🏻
Getting one for my daughter
Actually... putting your finger on the front of the trigger guard is the RIGHT WAY instead of shooting wrong... helps with RECOIL... along with whatever else