Introduction to MathCAD for Engineers

แชร์
ฝัง
  • เผยแพร่เมื่อ 25 พ.ย. 2024

ความคิดเห็น • 42

  • @alexanderelea8032
    @alexanderelea8032 ปีที่แล้ว +2

    My university classes are using MathCAD Prime, so following along was a little weird, but for the most part about 80% of the content you covered is common between the versions. Very helpful video, but I would definitely come back for a prime version if you published. Thank you very much!

    • @isacdaimary9908
      @isacdaimary9908 ปีที่แล้ว

      Is it free?

    • @alexanderelea8032
      @alexanderelea8032 ปีที่แล้ว

      @@isacdaimary9908 No, but my university provides licenses to students for use in classes. Seems mathcad prime is the only version you can get now so professors have moved on to the newer software. (School dependent obviously)

  • @shroogi1
    @shroogi1 6 ปีที่แล้ว +8

    Thanks a lot, that's might be the best ever about Mathcad learning. appreciate your time sir !

  • @XinhLe
    @XinhLe 3 ปีที่แล้ว +1

    Great on to review mathcad and learn other language such as python. I'm gonna try to use this as reference for doing the same thing in python to see the difference between mathcad and python.

    • @apm
      @apm  3 ปีที่แล้ว

      Here is a comparison: apmonitor.com/che263/index.php/Main/CompareMatlabPythonMathcad

  • @KeijoAmbersson
    @KeijoAmbersson 2 ปีที่แล้ว +3

    Appreciate this a ton. Thank you sir!

  • @nsolanoc.
    @nsolanoc. 7 ปีที่แล้ว +2

    Thanks for this course for ours, Chem.Engrs.

  • @anachakengineer
    @anachakengineer ปีที่แล้ว +1

    thanks you for your show .

  • @ahmedsayhood
    @ahmedsayhood 2 ปีที่แล้ว +1

    thank you a lot for the explanation!

  • @safiyagibran6193
    @safiyagibran6193 2 ปีที่แล้ว +1

    asked sir.
    1. I have a problem in the formulation. so some values don't connect. how to fix it?
    2. I want to change the unit from m2 to psi. but when I change it, the values are not the same and there are 2 units. how to fix it?
    Thanks for the response and explanation.

    • @apm
      @apm  2 ปีที่แล้ว

      This sounds like an issue for MathCAD support. I recommend going through their tutorials. The latest version is different than the one I showed.

  • @justinial1
    @justinial1 5 ปีที่แล้ว +1

    wonderful introduction video, thanks a lot!

  • @nsolanoc.
    @nsolanoc. 7 ปีที่แล้ว

    It's time to update this course, because of the updating of the MathCad... At this moment the four point o (4.0) has arrived. And thi course is based on the 15 version.

    • @apm
      @apm  7 ปีที่แล้ว

      We stopped teaching MathCAD and never upgraded to MathCAD prime because of the issue with backwards compatibility. A couple instructors have a little MathCAD but we've mostly moved on to Python. I agree that MathCAD 15 is antiquated.

  • @korayerman4275
    @korayerman4275 4 ปีที่แล้ว +4

    First of all thanks, In question 2, how could you manage to add power -2 to the paranthesis?

    • @apm
      @apm  4 ปีที่แล้ว +1

      You can type ^-2

  • @ghufranmoran8793
    @ghufranmoran8793 3 ปีที่แล้ว +1

    I have question in polt how i can talk with U ?

    • @apm
      @apm  3 ปีที่แล้ว

      I get many requests each week. I recommend you put your question here or seek help from the MathCAD provider.

  • @dineomoea2599
    @dineomoea2599 7 ปีที่แล้ว +2

    Really helpful. Thanks.

  • @ef7496
    @ef7496 7 ปีที่แล้ว +1

    Thank you so much

  • @janzhang1226
    @janzhang1226 2 ปีที่แล้ว

    thanks a lot

  • @kun_fu_taco4775
    @kun_fu_taco4775 4 ปีที่แล้ว +1

    Learning this in school this week. What applications will this be used for?

    • @apm
      @apm  4 ปีที่แล้ว

      MathCAD is good for homework-sized problems. Once you get to industrial-sized problems you'll likely need a tool like Python or Matlab.

  • @rajni108
    @rajni108 5 ปีที่แล้ว +1

    how can i download this
    price in rupees and dollars
    send link

    • @apm
      @apm  5 ปีที่แล้ว

      I wouldn't recommend that you buy MathCAD. Instead, I recommend that you use Python if you are looking for a computational tool. Check out the SymPy package that can do most of the symbolic math. apmonitor.com/che263

  • @abdullahaksar9084
    @abdullahaksar9084 5 ปีที่แล้ว

    Bro how can we do it for ciruits

    • @apm
      @apm  5 ปีที่แล้ว

      You probably want to use a different tool for circuits like these: en.wikipedia.org/wiki/List_of_free_electronics_circuit_simulators

  • @relanaythen572
    @relanaythen572 3 ปีที่แล้ว +1

    Thanks soo much, What are the purpose of these array functions?
    1-augment
    2-stack
    3-min
    4-max

    • @apm
      @apm  3 ปีที่แล้ว

      There is more MathCAD content on this website: apmonitor.com/che263/index.php/Main/MathcadOverview

  • @bricegreco8292
    @bricegreco8292 2 ปีที่แล้ว

    Could the video quality be any worse?

    • @apm
      @apm  2 ปีที่แล้ว

      Try setting the resolution to 1080p. TH-cam automatically reduces the quality to optimize video delivery. If you are willing to wait for the loading, you can force it to run at higher resolutions.

  • @sifredovences9004
    @sifredovences9004 5 ปีที่แล้ว

    in the example 2, "b" how come I got 16.076? but you got 18.347? , I'm confused my symbolic looks the same than yours.

    • @apm
      @apm  5 ปีที่แล้ว

      There is probably a small difference somewhere in your sheet. I'd recommend that you go through it again.

  • @TheSunshineRequiem
    @TheSunshineRequiem 5 ปีที่แล้ว

    problem 4 is incorrect, it says no number for the first one.

    • @apm
      @apm  5 ปีที่แล้ว

      I haven't looked at this in a while. Could you suggest a correction? You may also want to consider moving to Python: apmonitor.com/che263

  • @leonardosoto5669
    @leonardosoto5669 5 ปีที่แล้ว

    "a name is required here" how i can solve this?

    • @apm
      @apm  5 ปีที่แล้ว

      Does this help? community.ptc.com/t5/PTC-Mathcad/quot-A-name-is-required-here-quot-error-in-defining-Table-Matrix/m-p/328831

  •  6 ปีที่แล้ว

    Hi, Mathcad has something similar to the base mark I could not and could not find. Like "An", but "n" in there is a function, a base. It's like a formulator. Sample video, th-cam.com/video/Z8CINSwDB6I/w-d-xo.html
    This video is performing that spelling at exactly 1:59 time. "A s" is doing. How is this done?
    ANSWER.
    Thanks.

    • @apm
      @apm  6 ปีที่แล้ว

      You can do subscripts with a "." - In this case you would type A.s There is also the index operator that has shortcut A[s (with a open square bracket. You only want to use the index operator when you have a vector.

  • @foadsf
    @foadsf 3 ปีที่แล้ว

    Why not using the Free and Open source alternatives such as WxMaxima and GeoGebra? it is not cool that academics, paid by tax payers money, promote commercial products for free.

    • @clint.ontherange
      @clint.ontherange 3 ปีที่แล้ว

      BYU is a private school, paid by students and donors. Good try, though. Keep the dissidence alive! /s