Yes I want to see all in one automation with esp and raspberry pi with and without internet. Also can we make this type of project on raspberry pi as a server.
Very nice video. Next please - turns to e-bike with : 1st part - esp + switch (left - right)(turns with micro lights to driver) 2nd part - esp + ( 2x4 - max7219 ) with > simbols
Can u make video on IOT based project for farmers Project title - motor switch on and off Specifications- monitor live water level in well, if water it reach to motor auto power off, and show the power phase 2 or 3 before motor power on Every thing controlled by app Please make video on this
in these project , we have to enter the ssid & password of wifi in arduino code . any option to enter wifi detailsdirectly in app like sonoff switches ?
home automation with rf remote+3 or 4 switches+ fan dimmer if possible, then make using with both esp8266 and esp32 I really hope this comment gets noticed and you consider this idea. Thank You
Nice Project @techiesms.. How about customs / import charges ? I see DHL is only option available now .. What is your experience with customs to get PCB from JLCPCB ?
I like your project but I feel it was really fast, better if you explain little bit about the electronic circuits diagram and code go through that would be much good. O appreciate your work!
how to give external supply to esp32 board? As I'm working on a small project so I am creating PCB for it as well but I have confusion how to give external sources to it
Hello sir! It would be more exciting if you will also control all the appliances using the same esp32. Im looking forward to it sir, coz it will help me improve our thesis about home automation❤️
hi, could you explain "MQTT" coding on a NodeMCU(ESP32 or 8266) where it should be able to send and receive mqtt messages from a local mqtt host on a pi >>>OR IN SIMPLE>>AND
Sir will you please verify the website link given in the description. It does not have the schematic diagram and circuit diagram. If possible please upload the link once again sir.
You know, when you create a Blynk account you only get 2,000 Energy to use (their form of micro transactions), but you can actually run your own local Blynk server and have unlimited energy for free.
From my professional experience.. your PCB routing is quite bad, but doesn't matter, as long as it working properly and you keep on continuously improve, it is good already
@@sayantanmaiti2513 always remember, the traces for power line and also grounding, they should be thick enough to uphold the current going thru, but for signals line that carries over mA current, enough with minimum 6 mils in size.. but if you got chance to thicken a bit like 12 mils, it'll be much more better.. If possible, try to avoid using auto router..
Can you make that pcb with those mentioned standard! And publish ! Because it is way more compact ! I think it will be great if you do so this pcb will be more cheap and standardized
@@voltronicsautomation hmm make for community Utilise your knowledge and do what you can do so other can get benefits like me because i know what i want and how should it have to work but i can not design those pcb and make but i have great knowledge of technology but i am lacking in engineering!
Great. I really appreciate your videos.but brother Arduino ide don't compatible with industry applications I've give some interviews they don't prefer Arduino ide .
I am not an except of software. I am a television technical person. I have lot of interest in this types of projects. Sir can you explain that how can i order the same PCB to jclpcb without the Gerber file. Please reply
Can we import electronics stuffs from China like pcb, extra to India because in recent days issues are going on with China. Please tell yes or no. Thank you
@@techiesms ok. I have watched alot of your videos and I have and idea for my company but involves putting a few of your projects together. A few sensors, sms warning, rfid entry and a tablet dashboard. Do you guys customize projects for clients?
Thanks for bring this video sir. For this i was waiting for long time. Ultimately my request is fulfilled. Thank you so much...!!! Sir, i have one request from you. Can i get this PCBA on payable basis. Actually i checked on Merchandise section, i didn't found there 😔. Pls pls pls 🙏🙏🙏 sir.
2 Touch switches, 1 fan regulator with touch switch, 1 three pin socket with touch switch ( all with led indicator) All controlled over blynk, ir remote, google home, alexa simultaneously If you can make it.😍😍
Isn't esp32 an overkill for this project I mean I use Esp12 to control relays. Don't get me wrong your pcbs are sweet only for this i feel esp32 is too much.
I want Fan dimmer section also integrated it this project....
Also if required, you can use esp32 wrover...
🆒 Excellent video! Thanks from whole 🇵🇰. Watching your videos since my childhood 😆
Nice video 🔥🔥
And yess I want to see that all in one automation
Yes I want to see all in one automation with esp and raspberry pi with and without internet. Also can we make this type of project on raspberry pi as a server.
Yes , raspberry Pi as home automation server and cloud storage with single raspberry Pi
u r funny to watch man, thanks for your work!
Hi Sir, nice work :)
Can you please share the design EasyEDA link? so that I can download garber and component file?
Yes we do want next video but please include fan regulator too
Very nice video. Next please - turns to e-bike with :
1st part - esp + switch (left - right)(turns with micro lights to driver)
2nd part - esp + ( 2x4 - max7219 )
with > simbols
Nice Project! Love the vid, as always.👌😀
😇😇
Is that a particular type of switch that gives feedback?
Hey do we have to pay any extra custom duty or anything while ordering from JLCPCB?
Bro just 72$ as delivery charges lol😂
This is one of the beast project 🔥💙🔥
Thank You 😊
The Hi Link converter is just to power ESP32 and Relays or it has something to do with the current that appliances pull from circuit?
HiLink power supply is rated with max voltage and maximum current
Legend level Explained
I just love your videos. You are putting in great effort. would you please make a video on designing a PCB board on easyEDA.
Excellent Bro nice project. Am looking similar project with dimmer & temp/humidity sensor to set ac temperature alike SONOFF TH16. Thanks
Nice video and good info❤.. Make that all in 1 video asap bro..
Great project. 🎉🎉🎉
Thanks
Very good design - for the software better to use Tasmota. Is it possible to go beyond the 4 relays with esp32? What is the maximum ?
Sir gi, if u replace those bulky relay with triac like bt139 it will be more small
Is it cheaper to order from jlc pcb or to buy from market?
How to order above pcb in jlcpcb? it's asking Gerber file..?
Superb bro excellent. Please do ir remote control and blyink.
Amazing bro
What happen if i press off in blinky aap in case of mechanical switch is on? Does is switched off the respective relay ?
Yes
@@techiesms pls tell what software do you use for designing the PCB?
i sir good explain the projects works
Nice Video thank you
Can u make video on IOT based project for farmers
Project title - motor switch on and off
Specifications- monitor live water level in well, if water it reach to motor auto power off, and show the power phase 2 or 3 before motor power on
Every thing controlled by app
Please make video on this
And u r really great with ur work
Can you make with this tiny project for fan and 4 other appliances automation project
Awesome sir.
Excellent video!! I like it
😇😇
in these project , we have to enter the ssid & password of wifi in arduino code .
any option to enter wifi detailsdirectly in app like sonoff switches ?
home automation with rf remote+3 or 4 switches+ fan dimmer
if possible, then make using with both esp8266 and esp32
I really hope this comment gets noticed and you consider this idea.
Thank You
Nice 👍👍
Thank you
Nice project
I want to see all in one automation please
Include IR and the BLE. Make it all in one
Great job 👍
Thank you
thank you sir , sir i cant find easyeda editor file where is the easyeda editor file?
Excellent Project. Can you please do a video of the same using FIREBASE instead of BLYNK. ?
ભાઈ સેમ પ્રોજેક્ટ blynk નહિ google firebase ની સાથે બનાવ (વિથ ફીડબેક)
કારણ કે mit app ઇન્વેન્ટર મા આપડે app બનાવી શકીએ
do you sell only pcb`s ?
Hello Dear,
Why we are use 5V relay , we can use also BT136 or 138 for switching with voice ,
Relay are to much voice at switching time
Yes you can do that as well. It will act as a solid state relay then
Small pcb design including fan also 🤔
Nice Project @techiesms.. How about customs / import charges ? I see DHL is only option available now .. What is your experience with customs to get PCB from JLCPCB ?
I like your project but I feel it was really fast, better if you explain little bit about the electronic circuits diagram and code go through that would be much good. O appreciate your work!
Schematic and connection diagram not found while visiting the web page can anyone share
Please make a project with AC dimmer, using blynk and manual control also with live feedback of AC dimmer
Please share your easyeda project link its not menitoned on your link
how to give external supply to esp32 board? As I'm working on a small project so I am creating PCB for it as well but I have confusion how to give external sources to it
I think you can use AMS1117 3.3 v for 3.3 volt power supply for esp32 board or chip
I like your videos and projects. Can you make esp32 for car automation? Thank you
Excellent work sir.can you please add Eeprom function with fan dimmer including IR. Thanks in advance
Hello sir! It would be more exciting if you will also control all the appliances using the same esp32. Im looking forward to it sir, coz it will help me improve our thesis about home automation❤️
is it is work with out internet connection ???????
Could please share the pcb so I can generate BOM and pick and place file please.
Sir, Can you share the gerber file?
Itni mehnat to karo
@@shubhamsen4572 shi baat hai ,
Sbko pre written codes and files chahiye
@@RandomPerson494-12c tumko Nahi Chahiye😀
hi,
could you explain "MQTT" coding on a NodeMCU(ESP32 or 8266)
where it should be able to send and receive mqtt messages from a local mqtt host on a pi
>>>OR
IN SIMPLE>>AND
Esp32, Arduino,arm or pic microcontroller which is better
Sir will you please verify the website link given in the description. It does not have the schematic diagram and circuit diagram. If possible please upload the link once again sir.
You know, when you create a Blynk account you only get 2,000 Energy to use (their form of micro transactions), but you can actually run your own local Blynk server and have unlimited energy for free.
From my professional experience.. your PCB routing is quite bad, but doesn't matter, as long as it working properly and you keep on continuously improve, it is good already
Can you give some guidance to some sources where I can learn about professional pcb routing methods and industry pcb standards.?
@@sayantanmaiti2513 always remember, the traces for power line and also grounding, they should be thick enough to uphold the current going thru, but for signals line that carries over mA current, enough with minimum 6 mils in size.. but if you got chance to thicken a bit like 12 mils, it'll be much more better..
If possible, try to avoid using auto router..
Can you make that pcb with those mentioned standard! And publish ! Because it is way more compact !
I think it will be great if you do so this pcb will be more cheap and standardized
@@saiyammorakhiya8494 depend on the purpose.. for the time being I won't, but sooner who knows
@@voltronicsautomation hmm make for community
Utilise your knowledge and do what you can do so other can get benefits like me because i know what i want and how should it have to work but i can not design those pcb and make but i have great knowledge of technology but i am lacking in engineering!
Great. I really appreciate your videos.but brother Arduino ide don't compatible with industry applications I've give some interviews they don't prefer Arduino ide .
Where can I get the gerber file of this project
What software you use to design the PCB?
Easyeda
@@sayantanmaiti2513 thanks buddy❤️
sorry but i don't see the schematic on your link =((
hi my bro Can you please share the design EasyEDA link? so that I can download garber
I am not an except of software. I am a television technical person. I have lot of interest in this types of projects. Sir can you explain that how can i order the same PCB to jclpcb without the Gerber file. Please reply
Design circuit for motor control. (Dvd motor, hdd motor, brushless dc motor, simple dc motor, geared dc motor, printer stepper motor, etc) it's start, stop, speed control. Etc
How to control over inter Home assistant
Can we import electronics stuffs from China like pcb, extra to India because in recent days issues are going on with China. Please tell yes or no. Thank you
Yes
Is it possible to control it without Internet just a WiFi signal from router by blynke app??
Where did u upload the code?
Can I use Esp 8266 instead of ESP32..?
What are the changes I should make..
Both chips have a 32-bit processor. The ESP32 is a dual-core 160MHz to 240MHz CPU, whereas the ESP8266 is a single-core processor that runs at 80MHz.
How can I add WiFi credentials without modifying the code
Can i get the gerber file for this project ???
Great video. How can I buy a complete project from your team. Love your work
Purchase link is in description
But we only deliver in India
@@techiesms ok. I have watched alot of your videos and I have and idea for my company but involves putting a few of your projects together. A few sensors, sms warning, rfid entry and a tablet dashboard. Do you guys customize projects for clients?
Sir how to make this project with mit aap inventor
Why you kept done gap in zigzag line shape on the PCB?
To isolate mains voltage from dc
Exactly
Can this project be expanded to control 32 relays?
Yes ..based on available GPIOs
Thanks for bring this video sir. For this i was waiting for long time. Ultimately my request is fulfilled. Thank you so much...!!!
Sir, i have one request from you. Can i get this PCBA on payable basis. Actually i checked on Merchandise section, i didn't found there 😔. Pls pls pls 🙏🙏🙏 sir.
Hi sir, Please reply sir 😊
Ples can you share the gerber file of the pcb ?
Can i get the gerber file i don't know how to design a pcb
Very very nice sir
Thank you 😊
can i get the gerber file bro please to place an order of this project ??
Awesome !
Thanks 😊
2 Touch switches, 1 fan regulator with touch switch, 1 three pin socket with touch switch ( all with led indicator)
All controlled over blynk, ir remote, google home, alexa simultaneously
If you can make it.😍😍
Can we operate this with Alexa
Sir do project altogether IR remote, Blynk app and manual switch.
Only one question....
Can i use this tiny esp chip if i want to use it as commercial use...??
Yes
@@techiesms thank you... and what about librararies??
sir i need pcb file for this project
can I get the Geber file of this, it's amazing project
Waiting for next
Add an offline timer for each load
SIR PCB FILE MIL SAKTI HAI?
Can you do it with it webinterface
Isn't esp32 an overkill for this project I mean I use Esp12 to control relays. Don't get me wrong your pcbs are sweet only for this i feel esp32 is too much.
What is the maximum number of appliances which can be controlled per ESP32 ?
34 but you can utilised 28-30 devices.
Hi bro now make a automatic water pump controller and level indicator using ultrasonic sensor
Can you provide the schematic file please
Hii bro can you please share pcb layout file bro