The Duramax gets an upgraded column bearing!

Today I replaced my worn out column bearing with an upgraded one from Wolff Engineering.
This product works on most GMT800s and is a great upgrade to reduce the rattle from the steering column
LINK TO THE WOLFF ENGINEERING BEARING:
www.wolffeng.c...

[@coldsause14]

Thanks for the video. I just installed this in about 15 mins tops, and now i have no more noise. Thanks for the recommendation

[@chrismayhand7918]

Wish I would have seen this earlier, just bought 2 of the green bearings to replace on my 2 trucks. Thanks for all the info

[@stevenhoover748]

I installed this a few weeks ago and made a big difference. A bit of a challenge to install, but worth the effort and expense.

[@megastick9324]

My 02 is about ready for this. I’m a big guy and 265lbs, I HATE working under the dash, but if I don’t no one will lol.
Thanks for the tip and video, just have to get my gumption up lol.

[@Repomam2000]

This is great! I’m glad this video popped up. Thanks for sharing.

[@bobbyk6761]

Just got mine in. The old one I had to melt out with a propane touch because it broke off flush. New one slipped right in!

[@numbr3t]

I just bought one based off your video to fix my repeated issue! This bearing looks stout!

[@lulop022882]

I have one waiting to be installed. Forgot how easy to was. I recently had replaced with the dorman part and the intermediate shaft. Shouldn’t take long just replacing the bearing.

[@flinginairos]

I just tried to do the bearing and intermediate shaft the other day and COULD NOT get the shaft loose. I got mad and gave up 😂 I’ll try again and take the pedal out and use a pry bar to get the shaft out. I couldn’t budge it by hand.

[@jackcordeiro]

@@flinginairos it gave me a hard time also, the extra leverage definitely helped. Good luck!

[@LarryFopps]

Thanks Seth!

[@stephenfurr8769]

How did you both get that flush??? I can’t get it flush. Just stopped moving.

[@LarryFopps]

I stick with the OE style bearing personally on all of my trucks. OEM one lasted nearly 20 years, a replacement $20 factory style one will likely last just as long.

[@thicccustoms6503]

Damn I really want one but I think my steering wheel position sensor might be in the way😂🤣

[@joeytongue3982]

The company makes one for the steering wheel position sensor also

[@lewisgeer1994]

Thanks for the video. Where is that steering wheel from?

[@jackcordeiro]

Grant performance

[@tyinthesky8347]

What exhaust is on your truck? It’s so quiet…….

[@jackcordeiro]

3” Mbrp downpipe and 5” Mbrp exhaust

[@klumsytone]

How do you remove play in your steering? There’s a dead zone in the steering where nothing happens when you turn the steering wheel left or right. You have to go past that dead zone to turn the wheel.

[@HF1.0]

New steering gear box, RedHead

[@LBZOverlander]

GM gear box has an adjustment bolt. Just loosen the compression nut and adjust with Allen wrench. Lots of videos on this.

[@StarHunter28]

Definitely try tightening the adjustment key before dropping big bucks on a new box

[@kcgworks952]

Sick nasty😂

[@justininman3221]

Where did you order or get your column bearing from?

[@jackcordeiro]

It's from wolff engineering, I put their link in the description

[@bryontharp5790]

Can't do it on 09 and newer without removing the column so dumb