ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
ฝัง
- เผยแพร่เมื่อ 11 มิ.ย. 2022
- This video is to help others that need a code reader/ diagnostic tool for use with pre 2001 mercedes w210 and w202 chassis cars (uk/ europe) that only have the 38 pin socket in engine bay, this tool works perfect for me so thought i would share the info.
(Im not sponsored by or affiliated with Diagnostics world) just added the link for convenience.
www.diagnostic...
I purchased one , works well on my w202
I have found this useful, thanks!
Hi Jim I just bought this for my W 210 1999 e300td which has a Bas/Abs light intermittently come on. Mainly happens on longer runs. However when I plug the MB V1 in and go to the Brake Assist control unit it says 'Not Fitted'. Am I looking in the wrong place to see what the ABS system is up to. It doesn't seem to be in the ESP unit?
Sorry for the late reply, mine is on firmware 12.60, then select model, ABS - traction systems, then read codes, if that’s doesn’t work make sure the pins on car side are clean as mine had slight corrosion, also maybe try it with the car running, don’t know if this helps but I’ve not had a problem yet.
@@jimyl77 thanks for getting back to me. My software is on version 34.31and I enter E210 e300td post 3/97 but ABS is not then listed in the Control unit list, Are you entering the same vehicle data in your software version? Maybe I need to get hold of some old software! Thank you
@@nigel8470 That seems strange, as just been on icarsoft site and its showing latest version is 12.60, and mine is showing ABS - Traction system in the list, I have a E430 but shouldnt make a difference
@@jimyl77 Thank you that is strange - do you have a link to that update info?
www.icarsoft.com/Page/103.html
Thanks, Jim. I am curios which R129 model years this works on. I cannot find that information on their website or anywhere else on the internet. Could you scroll to R129 and see if it lists the 1995 model? Thanks.
Hello, yes it does, there are two options - SL (129)
Up to 08/1999 and
As of 09/1999
Scan tool software version is on V12.60
(Using their updating tool from their website).
Hope this helps.
I might do a vid going through all models that are supported.
Please explain to me the 38 pin CAN High and Low, Positive and Negative. Thanks
Sorry haven’t got a clue what you on about, all I know is I can get codes when I need them
Hi Jim. What was the fault in the end with your car?
I originally bout the scanner because my ABS, BAS and ESP light would stay on most of the time and nearing mot time, turned out to be the steering angle sensor.
@@jimyl77 did the scanner pick that up for you?
@@bernardwarr4187 yes, I ran it more than once over a couple of days and kept coming up with steering angle sensor, along with a code that I can’t quite remember.
❤
does it read the automatic transmission fluid temperature ?
Sorry for the late reply, I’ve just tried but doesn’t have option to see trans temp for my 98 e430, may be there for other models though.
If only scanner which brand do you prefer..with less cost..I already have obd and ikl cable..
I only bought this one because it works on my 1998 w210, which in the uk only has the round diagnostics plug in the engine compartment.
If I buy that adaptor, it'll work on any scan tool or just iCarsoft scanner?
It didn’t work on a cheap scan tool I had, but may work with others possibly
The adapter has a chip in it that only works on iCarsoft. Also look out for iCarsoft clone adapters, they look like the real thing but miss the chip and wont work