SOLIDWORKS Motion - Introduction
ฝัง
- เผยแพร่เมื่อ 27 ก.ค. 2024
- See more at: www.goengineer.com/products/so...
This 30 minute webinars gives you an introduction to SOLIDWORKS' in-built Rigid Body Dynamics tool and how it works,. It talks about the different options available like Motors, Contacts, Gravity and Springs. Once solved, the webinar describes some of the post processing options. Finally, a sneak peek into Event Based Motion is also looked at. Webinar presented by Arvind Krishnan of GoEngineer.
About GoEngineer: GoEnginneer delivers software, technology and expertise that enable companies to unlock innovation and deliver better products faster. With more than 30 years experience and thousands of customers in high-tech, medical, machine design, energy and other industries, GoEngineer provides best-in-class design solutions from SOLIDWORKS, Stratasys, CAMWorks and Agile PLM.
www.goengineer.com
/ goengineer
/ goengineer
/ goengineer
plus.google.com/+goengineer
You guys are making a super quality content and you are making it available for free , what a great job
Our pleasure! Be sure to subscribe for more great 3D CAD Design and 3D printing tutorials.
The best explanation of Solidworks Motion I have found on youtube! Much appreciated!
GoEngineer Rocks
SolidWorks Motion very well summarized within half an hour. Thank you for making and posting such instructive content !
You're very welcome!
Great Webinar. Thank you Arvind Krishnan.
excellent and i hope to make another section based in motion analysis
this video is amazing
Thank you for the tutorial
Good day to Goenginerr, i have a problem regarding about the import motion load. I have a shaft with a flywheel to rotate about 10 rpm in 30 s. The motion analysis runs smoothly, however, when i tried to import the loads into static to see the deflection and inputted bearing fixture (rigid) onto the split lines i had created, the transferred remote load appeared to be malfunctioned, and solid work gave out message saying that " One load/fixture/connector/contact is invalid". I had turned off the inertia relief and it still didint run smoothly with fixture on and no change in remote loads. Sadly, I tried test with Bearing Fixture, Roller/Slider Fixture, Cylindrical fixtures to mimic the bearing support during rotational motion, all failed and deformed drastically. May i know how to handle the remote load definition imported from the motion load when we had inputted the fixture or how i should input my fixture correctly? Thankyou.
SUBSCRIBED !
That was very helpful
excelent. thanks
Well Explained Sir🤘
how I can download these parts to apply what I learned?
good. thank you sir.
can i use sensor data in real time
for example i want to crate a force on a body its value is dependent on the body's velocity
Hello.
I had a doubt regarding solidworks motion study. Would be great if you could help.
Thanks in advance
very useful. many thanks
Thank you for watching. Be sure to subscribe if you haven't already.
Nicely done, thank you there are teaching lessons here also, to the point great job. Cheers!
Glad it was helpful! Be sure to subscribe for more great 3D CAD Design and 3D printing tutorials.
@@goengineer Very much so, thanks for the videos. I ask can you specify the version using and if the features are relative to either or all packages such as standard professional or premium. Outstanding job on the lesson as you included that information here. I have watched many more and don't find it consistent.
Thank you.
You're welcome!
My question is, if it is possible to do the beam deflection in Solidworks motion. I am trying to do this by fixing one edge of the beam with fixed support using mates and then mating a strip on the other side of the beam and applying a linear motor on the strip that pulls the strip and should bend the beam but it's not bending actually.
Hello Hafiz, you must use SOLIDWORKS Simulation to calculate deflection. Fortunately you can import Motion loads directly into Simulation! goeng.io/sk3CPp
Cam we import motion analysis results into CFD?
Since I want to run the CFD on a piston cylinder based compressor!
No unfortunately Motion analysis cannot import to SOLIDWORKS Flow Simulation. Flow Simulation has no moving parts only the flow field moves in SOLIDWORKS Flow Simulation. The only exception to this rule is rotating parts it is possible to physically move rotating parts in SOLIDWORKS Flow Simulation.
What I do when I need to run an analysis where parts are moving in Flow Simulation is to run several simulations in a row where the only thing that is changed is the placement of the part file or part files in space. Then you can compare how the flow reacts with the parts in various positions
.
Can anybody help me with linear motion?
Sir what is the purpose of giving hinge mate instead of concentric in cylinder assembly .. Thanks in advance
The hinge mate combines both a coincident and concentric constraint. This saves you from having to create multiple mates for the same joint. Thanks.
@@goengineer Thank you for your explanation and support
How to get rid of redundancies
I'm having difficulty animating a model. Can I send a file and have you walk me through the process?
TIA Don.
Don, if Go Engineer is your VAR please contact our Tech support department www.goengineer.com/support
And they can help you if the issue is a glitch in the software or get you some training assistance with an application mentoring session.
Uff.. Thanks
is it possible to find the force the face of the piston due to torque applied in the crank?
Yes, it is possible to get that information, though the process is a bit complicated for a youtube comment. Reach out to your VAR's Training team for a more complete answer.
Sorta like this:
www.goengineer.com/blog/prescribed-displacement-reaction-force-solidworks-simulation
Prescribed Displacement to find Reaction Force in SOLIDWORKS SimulationIn this article, learn all about prescribed displacement to find reaction force in SOLIDWORKS Simulation.www.goengineer.com
Use a torque instead of prescribed displacement then measure the reaction force.
@@goengineer thankyou
thanks for such an informative session............. can I apply motor to more than one mates at a time and animate it together??
Yes you can, in fact you can add a motor and define it’s parameters (Velocity/acceleration) in relation to another component/motor reference velocity/acceleration.
@@goengineer ok thanks.... can you suggest any video or tutorials. It will be really grateful. I tried searching it but i can't. Plz help me
horrible.