The best explanation easy by looking at the process. ((( All other videos says hight owner choice never explained ))) but this video everything what you need thank you 👍 👍 👍 👍 👍
I want to install this but run my plumbing through the framing (horizontally) Is that possible? I don't see why not...But no one shows it going horizontally. Always through the floor as if that's the only way to accomplish a proper installation. I am slab on grade and want to use this to escape cutting out concrete.
Have to put in 2 of these toilets for a customer, never doing these again so frustrating, paper instructions are useless. It’s so much easy to put in a standard regular toilet.
I read all the comments below and no one mentioned these two MAJOR flaws: 1. At no time in the instructions of videos (Jan 2022) does it include instructions on drilling the left side 2x4s for the water inlet. Instead the video says” now that you have drilled the hole” that magically appears in the video. Also the copper water connection is behind the blue bottom rail so completely inaccessible front the front. If you install on an outside or concrete block wall good luck getting it tight. 2. The water tank makes it impossible to properly tighten the top left hand lag bolt. For the price of this system these types of major design flaws should not occur!
remove the cover plate for the flush buttons and all parts can be repaired or replaced . if there is a problem with the outgoing drain pipe , the toilet and the wall tiles will have to be removed . however this almost never occurs so ,,,
This video is very helpful but no where in the instructions does it say the you need to install a pc of plywood. I have 5 of these in a house right now and they all shake because the wall has a flex in it
@@heartpimp I 100% agree with you the ones that are mounted in the house I’m at we’re installed by a shotty plumber. I never usually talk down on contractors but these guys were so bad they were thrown off the job. The toilets I was able to secure them tightly without the plywood but for further jobs with these toilets I will for sure be adding the plywood it just makes sense. Thank you.
My remote didn’t come with the piece to swap out the top of the remote that has the auto flush buttons. Where can I purchase that top clip on attachment?
It didn't come with it because you didn't purchase the "auto flush" option model, so in this case you wouldn't need info on where to purchase this remote clip cause it wouldn't do you any good.
You can turn off the water supply valve by removing the cover from the splash guard, removing the actuator pushrods, and removing the splash guard. The valve is there inside near the top.
TOTO please do a video installation into a concrete block wall. Also, find a solution so the bidet controls are not next to the toilet. Bluetooth control panel that can be attached anywhere on a wall. Phone app or Google voice command.
I was dangling my feet off the toilet pretending the ground was lava. I did a little butt hop and the toilet broke out of the wall... As I lay on the floor with a mild concussion the water and brown monster mudd splashes onto my face. Reevaluating how i ended up in that current situation I couldn't help but think I should have got a 1 piece toilet. They are sexy. They are sleek. They are like a smooth sleek bentley.
The plywood is used instead of drywall. When you screw the toilet to the wall the drywall may compress. You can use high density drywall when tiling with a full coverage of adhesive and silicone caulk the metal frame so there is no gaps to prevent tiles from cracking when the toilet compresses against the wall when you tighten it to the wall.
This is some seventies adult video music. I kept waiting for Ron Jeremy to come around the corner and be like "I'll insert seal grease into your hole." Kidding very informative video.
Beat me to it. Reminds me of that first forbidden film way back when, so much hair and some rather filthy acts all set to soothing groovy music. Good times… And agreed, succinct instructions and clear visuals make for a very helpful how-to video. I’m referring to the toilet install here, not the other stuff.
Has anyone already used TOTO AP or EP toilets? heard the opinion that they have a problem with flush №2 (because of the lip at the bottom of the ceramics)? ((
I know what you mean.i worked in Carribean island St.Maarten and there such toilet was 120 euro .now I am in Canada and one such toilet is from 1500 to 2000 dollars .I don't understand why ?
My wife loves these toilets. Today in chat I wanted to explain to her how bad they are and I was like fingers crossed she would agree and she sent me this. "I did a little research and I do not want this toilet they can blow up into the wall cavity and damage the walls and the beautiful coffered ceiling in our basement so put regular" 😂 I was ohhhh niceeeeeee.
@@EPICSOUNDTRAX gotta appreciate the moments of wisdom 🤣🤣. I was renovating a couple years ago and thought this option was simple and cheap. When I did my research, noped the fuck out. Glad I did. I know have toilets that do their job minus the headache.
The wall mounts are standard In many countries. I am still not sure, but what I am told by European friends is that they are surprised by all the gross problems with their USA toilets. The clogging, overflowing, and leaky flaps are something they don’t see in decades of use in Europe, and they are blown away that everyone knows what goes on with the pieces in the tank. They say that wall mounted toilets flush better/more powerful, and are cleaner on the inside, and easier to clean on the outside. So I think their way of thinking is it’s better to have one day with an annoying install, than many small shitty 😅 problems over time. But I am still having a hard time wrapping my head around it. The complexity is hurting my brain.
Easy to install, th-cam.com/users/postUgkxjA-hDN2m8_mi0Dg0JD8U6QiArozIAc4I and comfortable. No idea what other people were talking about when they said it was difficult to install or uncomfortable.
That's the most beautiful instructional video I've ever seen. Well made, clear. Brought a tear to my eye.
kind of want to be a home owner so I can install one of these :)
@@chrismiller5433 yea, i want to replace my old wall hung toilet, to this :)
Are you depressed or why did you have to cry?
Outstanding video
Can these be mounted in a 2×4 framed wall! Agree that this is one of the best how to videos I've ever seen!
I love it when a toilet comes together
Why does it not show the foam gasket between the toilet and the wall ?
The best explanation easy by looking at the process. ((( All other videos says hight owner choice never explained ))) but this video everything what you need thank you 👍 👍 👍 👍 👍
7:16 Is that box that comes with the Duofit in-wall tank system (TOTO WT173MA) or bought separetly. if so, what's the model num?
This can be applied to other wall hung toilets
If there is maintenance work needed on the water tank, how can one do that? Break down the tile wall?
I want to install this but run my plumbing through the framing (horizontally) Is that possible? I don't see why not...But no one shows it going horizontally. Always through the floor as if that's the only way to accomplish a proper installation. I am slab on grade and want to use this to escape cutting out concrete.
How you give maintenance to the tank without tearing appart the whole wall?
Have to put in 2 of these toilets for a customer, never doing these again so frustrating, paper instructions are useless. It’s so much easy to put in a standard regular toilet.
I read all the comments below and no one mentioned these two MAJOR flaws: 1. At no time in the instructions of videos (Jan 2022) does it include instructions on drilling the left side 2x4s for the water inlet. Instead the video says” now that you have drilled the hole” that magically appears in the video. Also the copper water connection is behind the blue bottom rail so completely inaccessible front the front. If you install on an outside or concrete block wall good luck getting it tight. 2. The water tank makes it impossible to properly tighten the top left hand lag bolt. For the price of this system these types of major design flaws should not occur!
0:36
@@BookieTechlol
Might help to watch the clip again. Sometimes we miss things the first time.
My man's brain exploded 30 seconds in
Note… to be installed by professional 😂
But what if it has to do a maintenance or something is break?
remove the cover plate for the flush buttons and all parts can be repaired or replaced . if there is a problem with the outgoing drain pipe , the toilet and the wall tiles will have to be removed . however this almost never occurs so ,,,
@@siriosstar4789 so the fill valve can be replaced..?
is there a way to not increase the wall thickness? I just want to use the existing walls of the house.
I lost my auto flush cable that plugs into the seat. Can't find it in the toto parts store.
Can someone tell me how often dose the seal lubricant needs to be refreshed? Thank you.
Very good instruction
This video is very helpful but no where in the instructions does it say the you need to install a pc of plywood. I have 5 of these in a house right now and they all shake because the wall has a flex in it
we always mount these in 2x6 walls to limit that flex, and then the plywood on top, which also helps protect the tank from punctures.
@@heartpimp I 100% agree with you the ones that are mounted in the house I’m at we’re installed by a shotty plumber. I never usually talk down on contractors but these guys were so bad they were thrown off the job. The toilets I was able to secure them tightly without the plywood but for further jobs with these toilets I will for sure be adding the plywood it just makes sense. Thank you.
Don’t need plywood secure to the beams that’s all
All looks good but if/when that cistern fails, it’s going to be a lot of work getting to it behind the tiles and wall!
My remote didn’t come with the piece to swap out the top of the remote that has the auto flush buttons. Where can I purchase that top clip on attachment?
It didn't come with it because you didn't purchase the "auto flush" option model, so in this case you wouldn't need info on where to purchase this remote clip cause it wouldn't do you any good.
Is there no electrical junction box?
If you need to, how do you access the tank to turn off the water supply valve?
You can turn off the water supply valve by removing the cover from the splash guard, removing the actuator pushrods, and removing the splash guard. The valve is there inside near the top.
TOTO please do a video installation into a concrete block wall. Also, find a solution so the bidet controls are not next to the toilet. Bluetooth control panel that can be attached anywhere on a wall. Phone app or Google voice command.
Specs say 2x4 frame requires optional “waste outlet kit” ... where is that anywhere?
That's the Toto THU343. But yeah I'd love to see instructions for using it.
What’s the soundtrack?
I was dangling my feet off the toilet pretending the ground was lava. I did a little butt hop and the toilet broke out of the wall... As I lay on the floor with a mild concussion the water and brown monster mudd splashes onto my face. Reevaluating how i ended up in that current situation I couldn't help but think I should have got a 1 piece toilet. They are sexy. They are sleek. They are like a smooth sleek bentley.
Can this support a 300lbs man?
I like the first thing he sead, for framing see the manual. It's kinda what I'm looking for.
How does the plywood fit in? If we don’t have tile finish, Is it gypsum board over the plywood?
Did you ever get an answer to this?
@@michaelnoone984 I never got an answer
The plywood is used instead of drywall. When you screw the toilet to the wall the drywall may compress. You can use high density drywall when tiling with a full coverage of adhesive and silicone caulk the metal frame so there is no gaps to prevent tiles from cracking when the toilet compresses against the wall when you tighten it to the wall.
This is some seventies adult video music. I kept waiting for Ron Jeremy to come around the corner and be like "I'll insert seal grease into your hole."
Kidding very informative video.
Beat me to it. Reminds me of that first forbidden film way back when, so much hair and some rather filthy acts all set to soothing groovy music. Good times… And agreed, succinct instructions and clear visuals make for a very helpful how-to video. I’m referring to the toilet install here, not the other stuff.
Has anyone already used TOTO AP or EP toilets? heard the opinion that they have a problem with flush №2 (because of the lip at the bottom of the ceramics)? ((
do not purchase this item it has many flaws
Allen wrench is provided, but many necessary components aren’t.
We have concrete or stone walls in india and it is easy to install there. However i wanted this in Australia and its soooo expensive here
I know what you mean.i worked in Carribean island St.Maarten and there such toilet was 120 euro .now I am in Canada and one such toilet is from 1500 to 2000 dollars .I don't understand why ?
when electricity is out, it won't flush
Nice 👍👍👍
I been a plumber for 14 years and I gotta ask what is a leak? Like what’s the word mean? Tf lolol
The plug thing is annoying considering the cost of this
So obviously a copy of the Geberit system. Toto finally abandons previous, failed carrier design. But why is Geberit not standing up for their IP?
Mine is skew
Ok cancel the wall-mounted toilet seat. Let's go shopping for a regular one.
NO SHIT!
True! Too complicated. Once you gets problem, you need to open the entire wall!
My wife loves these toilets.
Today in chat I wanted to explain to her how bad they are and I was like fingers crossed she would agree and she sent me this.
"I did a little research and I do not want this toilet they can blow up into the wall cavity and damage the walls and the beautiful coffered ceiling in our basement so put regular"
😂 I was ohhhh niceeeeeee.
@@EPICSOUNDTRAX gotta appreciate the moments of wisdom 🤣🤣. I was renovating a couple years ago and thought this option was simple and cheap. When I did my research, noped the fuck out. Glad I did. I know have toilets that do their job minus the headache.
The wall mounts are standard In many countries. I am still not sure, but what I am told by European friends is that they are surprised by all the gross problems with their USA toilets. The clogging, overflowing, and leaky flaps are something they don’t see in decades of use in Europe, and they are blown away that everyone knows what goes on with the pieces in the tank. They say that wall mounted toilets flush better/more powerful, and are cleaner on the inside, and easier to clean on the outside. So I think their way of thinking is it’s better to have one day with an annoying install, than many small shitty 😅 problems over time. But I am still having a hard time wrapping my head around it. The complexity is hurting my brain.
Worst things to fit , held on by a tiny bolt all the weight pulling in one area, terrible design
yes, terrible desing on wall fasteners
1:25
3:55
4:32
Big drama just to poo 🤯
Easy to install, th-cam.com/users/postUgkxjA-hDN2m8_mi0Dg0JD8U6QiArozIAc4I and comfortable. No idea what other people were talking about when they said it was difficult to install or uncomfortable.
Toilet installations
Make sure you don't install that bidet the other way around... you'll get more than what you've bargained for...
😂
Great video. Terrible, too loud music.
Is this a joke?
I may have exaggerated the reaction but it clearly is a well made video, no bullshit content.
Back up generator
Insanity.
Absolutely, how many things can leak?