Suzuki Burgman 400 Front Brake Caliper Rebuild Tutorial | Mitch's Scooter Stuff

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ธ.ค. 2024

ความคิดเห็น • 74

  • @MitchsScooterStuff
    @MitchsScooterStuff  4 ปีที่แล้ว +5

    *** Tools / materials I used in this video:
    Brake pad EBC FA197HH - amzn.to/2WIfNXK
    Brake pad EBC FA228HH - amzn.to/3cfm5EG
    Pistons / seals - amzn.to/2yLeKhw
    Union bolt washers - amzn.to/2zlHZrs
    Brake fluid DOT 4 - amzn.to/2GEIHzH
    Caliper grease - amzn.to/2Mjtis1
    ----------
    Short Phillips screwdriver #2 - amzn.to/2K37Zt0
    Rag - Rags - amzn.to/2LlaGqV
    Paint tape - Paint tape - amzn.to/3cjfpFN
    Syringe with tube - amzn.to/2G951U2
    Brake mini bleeder - amzn.to/35Lbor3
    Ratchet 3/8 drive - amzn.to/2hhmnUs
    3" / 6” extension set 3/8 drive - amzn.to/2h7ypMl
    12mm socket 3/8 drive - amzn.to/2xM4Edr
    8mm tall socket 3/8 drive - amzn.to/3dv3C7h
    5mm allen 3/8 drive - amzn.to/2ofCuCg
    14mm socket 3/8 drive - amzn.to/2xGn4Ms
    Thin block
    Air compressor - Air compressor - amzn.to/2LetN6j
    Air blow gun -amzn.to/3fCwpIQ
    Knife
    Carburetor spray cleaner - amzn.to/2Xy8Fiy
    Toothbrush - amzn.to/31HSoXI
    Oil drip tray pan - amzn.to/3brpgIO
    Scotch-brite pad - amzn.to/2xP621n
    Fine Grit 2000 sandpaper - amzn.to/2zscAmV
    Bowl with warm water
    Little bowl
    Nitrile gloves - amzn.to/3ceZ5FT
    Threadlocker - amzn.to/2SPbY1R
    Flathead screwdriver - amzn.to/2jN7lpE
    Cotton swabs (q-tips) - amzn.to/2EOXBpn

  • @scasper1010
    @scasper1010 3 ปีที่แล้ว +3

    Best tutorial video I’ve seen in a while. No editing or cuts just a true blue brake job

  • @seadog915
    @seadog915 3 ปีที่แล้ว +3

    I'm sure I'm going to be watching a lot more of these video's in the next couple of weeks. I just ordered new Tires, Brakes, Dyna-beads and a bunch more! I actually started watching these before I bought one and wound up with the same exact scooter as yours. The biggest difference is I'm pushing 70 and don't have any hair. GREAT TUTORIALS Mitch!

  • @rodney7136
    @rodney7136 4 ปีที่แล้ว +1

    That was the most informative and detailed video I have ever watched. And not a single word was spoken. I can't wait to get my 400 and start wrenching. I know where to go to learn how to care for it.

  • @TEKY61
    @TEKY61 ปีที่แล้ว +1

    Este hombre es un artista.tanto como mecánico y como explica todo en sus vídeos,mejor no se puede hacer.
    Un abrazo desde España.

  • @gervaisdube1843
    @gervaisdube1843 2 ปีที่แล้ว +1

    Great tutorial as usual! I plan to just replace the brake fluid in the front brake system. Is there a special bleeding procedure for a 400 with the ABS system? Thanks!

  • @mitchschneider1927
    @mitchschneider1927 3 ปีที่แล้ว

    I'm a Mitch too, and just bought a 2009 Burgman. I just went to start it and have a dead battery, thanks for the video on that.

  • @deboerkanna1
    @deboerkanna1 3 ปีที่แล้ว +1

    Superb video, small remark to be added at start. Dont let fluid touch any painted surface because it kills the paint. Dont touch the fluid because it causes nervoussystem issues.

  • @DaveRutherford-l7b
    @DaveRutherford-l7b ปีที่แล้ว

    I appreciate your doing the Burgman videos.

  • @mikek3658
    @mikek3658 ปีที่แล้ว

    Love your videos, Mitch! It's about time you got yourself a Honda Helix! I just bought my second Helix and I can't wait for warmer weather!

    • @MitchsScooterStuff
      @MitchsScooterStuff  ปีที่แล้ว

      Thank you Mike! My cousin sold me his project Helix! I am trying to save up $$ to ship Helix to Hawaii from Washington State this summer! Very cool! I never ever worked or rode on Helix before.. I am looking forward to get my hands on one! 😄👍🏼

  • @russelallen5342
    @russelallen5342 4 ปีที่แล้ว

    I noticed on your videos about replacing the caliper if there are nicks or scratches. I was trained that they wont cause any problem as there is a lot of clearance between the bore and piston. The important part is the piston and seals. This is what we were taught in Ford, GM and Chrysler Factory Schools. I have followed this with 100% success and no come backs for 50 years and thousands of brake jobs. If they are stating otherwise these days, I suspect it is to sell parts.

  • @barneykennett9282
    @barneykennett9282 4 ปีที่แล้ว +6

    This is a superb tutorial Mitch...👍

  • @ArenaDinamo
    @ArenaDinamo 4 หลายเดือนก่อน

    Big respect from Russia

  • @brandywell44
    @brandywell44 4 ปีที่แล้ว

    Mitch, there is usually a right way around for brake seals. The inner radius has a sharper edge which goes deep in the caliper and a less sharper edge which goes towards the pads.

  • @darioallievi7160
    @darioallievi7160 ปีที่แล้ว

    Un lavoro di infinita pazienza e precisione 🤔🤔🤔

  • @vickikgibson9470
    @vickikgibson9470 ปีที่แล้ว

    Hey Mitch, as usual, your stuff is top-notch!! I have a yamaha 400 majesty 2009, with just one side with brake. It's the same steps, yes? Also, would you have a vid on how to do the front fork seal replacements? Cheers and thanks so much!!

  • @danilomosca4863
    @danilomosca4863 ปีที่แล้ว

    salve come sempre bravissimo mi potresti dire quanto liquido freni serve per la sostituzione sia anteriore che posteriore e che marca di olio usi ti ringrazio

  • @davidduxberry2515
    @davidduxberry2515 2 ปีที่แล้ว

    Hi Mitch , great tutorials , could you do one on fixing or replacing the seat lock mechanism on a burgman 400 please 🙏thanks Dave

  • @fv7765
    @fv7765 4 ปีที่แล้ว

    Great and a very helpful video!, I used copper grease on both side of pads, because it prevent become squeak when apply the brakes, plus I used silicone brake fluid lifetime without change (not subtle for some scooter)

    • @MitchsScooterStuff
      @MitchsScooterStuff  4 ปีที่แล้ว +1

      Thank you! Great to know, thanks for stopping by to drop a comment 🤙🏼🤙🏼

  • @isaaczaman
    @isaaczaman 3 ปีที่แล้ว

    Mitch! First off thank you so much! I hope you see this! Or anyone else who may know!! Is this the Same for a 2006 burgman 400? Also where would one find the torque wrench specs like you have listed on the screen? - are they In the manual somewhere? THANKS!

    • @seadog915
      @seadog915 3 ปีที่แล้ว +1

      I don't know if you have already found out, but an 06 and 07 are a little different. But if you look on his home page he has a lot of videos for 06 and previous models. I never knew these existed till I started watching his video's and had quit riding bikes altogether. Then I picked up an 07 for 800$ put about 500 into it and it's like new. Love it. (I think you can download a service manual for free)

  • @joejunior1744
    @joejunior1744 3 ปีที่แล้ว

    And the interior of the clamps, where the cylinders work, we do not clean, we go back without removing the polish?

  • @MikeSmith-kk8qd
    @MikeSmith-kk8qd 3 ปีที่แล้ว

    How did you get the pistons in that easily? I had to press them in

  • @martina.5821
    @martina.5821 หลายเดือนก่อน

    Vielen Dank für das Video!

  • @nicvenzon5742
    @nicvenzon5742 4 ปีที่แล้ว

    Hi Mitch! Do you have a plastic installation for the CH80 like you do for the Honda Elite 250? I swear I can't figure out how to take some pieces off of my CH80.
    Thanks! Love the instructional videos by the way

  • @DumpsterMarcus
    @DumpsterMarcus 4 ปีที่แล้ว

    Good video Mitch!! I need to do this to my new Harley I just got. It’s an 2003 so will def check the breaks

    • @MitchsScooterStuff
      @MitchsScooterStuff  4 ปีที่แล้ว

      Thanks Marcus ! Oh yeah good idea and keep you safe on the road!

  • @ciogon
    @ciogon 2 ปีที่แล้ว

    you should apply loctite on the bolts that hold the caliper carrier!!!

  • @TEKY61
    @TEKY61 3 ปีที่แล้ว

    Mejor explicado imposible un 10..y que cuidadoso es.

  • @genarorojas2303
    @genarorojas2303 3 ปีที่แล้ว

    Sabe mucho, mis respetos, saludos desde mi País "COSTA 🇨🇷 RICA, PURA VIDA".✌️

  • @JoarsonAndriatsivahiny
    @JoarsonAndriatsivahiny 4 ปีที่แล้ว

    Thanx for this tuto. It's just what I need! Here, take my like sir!

  • @thatoldbob7956
    @thatoldbob7956 4 ปีที่แล้ว

    Hello Mitch,
    I recently subscribed. I have a ‘85 Elite, an ‘86 Helix and since two weeks a 2006 Burgman 400, because the Helix flooded with oil the whole driving unit giving a very sharp constantly rattling noise. I know you are in Hawaii now. I am in Montreal, an old man of 94, That Old Bob on TH-cam. Question: where is the problem. I am to old to work on it so how much of a repair could cost at a Honda dealer??? In Montreal, Canada. Thanks for the many high standard, very understandable videos.

  • @Foggyfighter
    @Foggyfighter 4 ปีที่แล้ว

    Hi Mitch! Awesome content!! Quick question. My front brake (honda cbx 750f, from -84) locks while using it. When opening the valve on the caliper the piston goes back and the pressure releases. You think I just have to redo the entire brake system? Or where would you start looking for the issues. Sorry for bad explanation. Cheers!!

    • @ciogon
      @ciogon 2 ปีที่แล้ว

      Your lever is keeping the pump "engaged" so the fluid cant come back in the reservoir....

  • @TEKY61
    @TEKY61 3 ปีที่แล้ว

    Este hombre es un genio.

  • @asedalkhalas3221
    @asedalkhalas3221 3 ปีที่แล้ว

    Thank you very much, Professor, very useful information

  • @saidloukili3095
    @saidloukili3095 3 ปีที่แล้ว

    ماشاء الله عليك اخي الكريم تحياتي ليك من المغرب

  • @darioallievi7160
    @darioallievi7160 ปีที่แล้ว

    , questo Ragazzo 🤔 a davvero l'è palle 🤔👍👍👍
    Number One

  • @RamiAgonistes
    @RamiAgonistes 3 ปีที่แล้ว +1

    There are some things Mitch shows that I will attempt...this is NOT one of them! Lol

  • @fiftyracer192
    @fiftyracer192 4 ปีที่แล้ว

    Careful measuring the discs with a caliper lads if it has any kind of a lip it's easy to get a false reading, make sure you have the caliper angled so the jaws only contact the wear area. Or use a micrometer or similar

  • @와우-x9q
    @와우-x9q ปีที่แล้ว

    매우 상세히 알려주는 영상 매우 감사합니다.

  • @fabianobrazoliveira3974
    @fabianobrazoliveira3974 2 ปีที่แล้ว

    Very good , Thanks guy 👊👊👊

  • @suzana0liveira170
    @suzana0liveira170 4 ปีที่แล้ว

    Details complete!

  • @mladji984
    @mladji984 4 ปีที่แล้ว

    When we can expect rear caliper rebuild?

    • @RamiAgonistes
      @RamiAgonistes 3 ปีที่แล้ว

      It's not the same procedure?

    • @mladji984
      @mladji984 3 ปีที่แล้ว

      @@RamiAgonistes no

  • @suzana0liveira170
    @suzana0liveira170 4 ปีที่แล้ว

    Very good!✌

  • @christwahyudi2820
    @christwahyudi2820 4 ปีที่แล้ว +1

    Ada suara burung merpati... There is sound of bird...

    • @MitchsScooterStuff
      @MitchsScooterStuff  4 ปีที่แล้ว +1

      Haha yes so many birds around here.... strong bird community 😂😂 Java Finch, Love parrots, Doves and others... like this video I filmed for my other channel th-cam.com/video/t-KtNwp5V9c/w-d-xo.html

  • @حسنحسن-و9ب5ع
    @حسنحسن-و9ب5ع 3 ปีที่แล้ว

    روعة

  • @harryburford6629
    @harryburford6629 4 ปีที่แล้ว

    your old pads were still just fine they would be good spares

  • @ersan9688
    @ersan9688 4 ปีที่แล้ว

    Greetings from ❤🇹🇷❤😷👍

  • @davehorlacher
    @davehorlacher 4 ปีที่แล้ว

    👍👍👍👍👍👍

  • @schrauberermel1758
    @schrauberermel1758 4 ปีที่แล้ว

    👍👍👍👍👍👍👍👍👍👍👍👍

  • @rosewell1983
    @rosewell1983 4 ปีที่แล้ว

    Ok, im gonna watch this video. But first i am going to take a nap

  • @saven305
    @saven305 4 ปีที่แล้ว

    ICH DANKE DIR !!!!!

  • @alimst086
    @alimst086 4 ปีที่แล้ว

    🌹🌹🌹🌹

  • @odibaracatibaro1255
    @odibaracatibaro1255 4 ปีที่แล้ว

    Why put back that rusty clip

  • @aldoabbruzzese734
    @aldoabbruzzese734 2 ปีที่แล้ว

    4

  • @MarcosAntonio-tf5rc
    @MarcosAntonio-tf5rc 4 ปีที่แล้ว

    🇧🇷👍🏽👌🏽👏🏽👏🏽👏🏽👏🏽👏🏽

  • @СашаСафонов-ы7н
    @СашаСафонов-ы7н 3 ปีที่แล้ว

    Hey! cool video you have, with me a subscription!