On the fridge or what the fridge is putting out? I’d just put a thermometer inside for an hour to see what it’s at. The fridge will fluctuate somewhat but unless you track the data for longer it may be inaccurate
I’m not sure why they didn’t add the functionality to be able to display the current temperature on the control panel. My predecessor refrigerator, which was GE had this. It just seems common sense.
Neither of my crisper drawers fully close. They keep getting hung up on the lip. Can't adjust it either. So pissed. Dealing with company I purchased it from now and it's been a headache.
Hey boss. I just bought the exact fridge last night. Z08 model number though. Plugged it in this morning. Got home today and it wasn't even cold. Any suggestions on where to start? Before I load into truck and take it bk to lowes. Thanks.
If you bought it new I’d personally not touch it because you might void the warranty and it’s on them to get you a working fridge. But in the mean time, is the freezer working? Do you hear the compressor? Is it cool?
My Maytag frag keeps grazing my food in the frag please let me know what it’s the problem I can fix my temperature for my frag so it doesn’t freezes my vegetables and fruit milk in my forage please I need your help thank you I appreciate it if hear from you 🙏
Two things to check. 1) What is the fridge temperature? Check the settings on inside the fridge on the dial if yours doesn't have a screen 2) Check the weather stripping seal around the fridge door. Close a dollar bill on the center of the gasket to check for leaks. If the bill slips in and out easily, you may need a new gasket as this poor seal can affect the fridge running
Great question! Here is the short version: 1) Unplug the fridge, 2) pull out the middle drawer, 3) use a putty knife or flat-head screw driver to CAREFULLY pry around the trim of the light 4) remove the light from the connector and replace 5) put it all back together
I believe the middle drawer temperature is based off the rest of the refrigerator. The manual makes no distinction except between fridge or freezer (chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/www.whirlpool.com/content/dam/global/documents/201809/use-and-care-w10422734-revB.pdf see page 10)
Hello. I've tried this several times. While I can see it's changed, it actually not changing it. What I mean is that when I set the desired temp and press confrim, everything looks good. But when I check the temp it shows the same previous setting. I left it thinking it should at least change the next day(maybe it needs some time to go up or down) But it's still the same. Anyone knows why? Thanks.
I wonder if power cycling the refrigerator might help. I don't have the owner's manual for this fridge but you may find something in there. Could just need a simple power cycle or there could be an issue with the board.
@@learnsavediy You show the temperature change on the refrigerator side but what about the freezer side do you just press the button once again to pull up freezer?
Super easy! Moved into a new place and we couldn’t figure this out at all. Thanks for the walkthrough!
Glad it helped!!! Thanks for watching
Thank you mine is freezing my vegetables so I came to TH-cam and came across this video
You’re welcome!
Thank you! Mine was freezing everything!
Glad it helped!
What did you do to change it from freezing everything?
Thank you so much for your video on how to adjust ref temperature.
Happy to help!
I wish the temperature would display on the screen when you open the door.
Thank you!, this also worked for my french door MAYTAG fridge.
Glad it worked!
Thanks. Exactly what I needed
You’re welcome!
How do you check the current temperature to make sure it's actually running at that temperature?
On the fridge or what the fridge is putting out? I’d just put a thermometer inside for an hour to see what it’s at. The fridge will fluctuate somewhat but unless you track the data for longer it may be inaccurate
I’m not sure why they didn’t add the functionality to be able to display the current temperature on the control panel. My predecessor refrigerator, which was GE had this. It just seems common sense.
Neither of my crisper drawers fully close. They keep getting hung up on the lip. Can't adjust it either. So pissed. Dealing with company I purchased it from now and it's been a headache.
Let us know how it goes. It’s frustrating how hard it can be to work with those companies since they are good about blaming the buyer for everything…
going up is colder ? or less bars is colder my old fridge u went down for colder temp
Mine displays the temperature so it was just adjusting that up or down. Going down should be colder but yours might be different
Hey boss. I just bought the exact fridge last night. Z08 model number though. Plugged it in this morning. Got home today and it wasn't even cold. Any suggestions on where to start? Before I load into truck and take it bk to lowes. Thanks.
If you bought it new I’d personally not touch it because you might void the warranty and it’s on them to get you a working fridge. But in the mean time, is the freezer working? Do you hear the compressor? Is it cool?
We had a power outtage and my fridge, just like the one in the video is flashing PO. What do I do?
I think you need to acknowledge the power outage. Try pressing “confirm” under Measured Fill and that should remove it
Thank you so much!
You’re welcome!
Good evening, sorry, my refrigerator is the same as the one in your video and I need to know why it is not freezing the meats.
So your freezer isn’t working but your fridge is?
Very helpful. Thank you.
You’re welcome!
Thanks for tutorial
Ty. Very helpful 👌
Thanks for watching! Cheers!
Thanks so much.
You’re very welcome!
It was helpful
My Maytag frag keeps grazing my food in the frag please let me know what it’s the problem I can fix my temperature for my frag so it doesn’t freezes my vegetables and fruit milk in my forage please I need your help thank you I appreciate it if hear from you 🙏
Two things to check. 1) What is the fridge temperature? Check the settings on inside the fridge on the dial if yours doesn't have a screen 2) Check the weather stripping seal around the fridge door. Close a dollar bill on the center of the gasket to check for leaks. If the bill slips in and out easily, you may need a new gasket as this poor seal can affect the fridge running
@@learnsavediy
Thank you for responding I will try this . But my temperature it’s on the front of my fridge it sets on 38 deg
@@Samira1760 gotcha. Could be a leak in the door gasket causing it to over cool and therefore freeze the food
@@learnsavediy it is not a leak it’s new Frigerator but it keep frizzing
How to replace the lights in the middle draw?
Great question! Here is the short version: 1) Unplug the fridge, 2) pull out the middle drawer, 3) use a putty knife or flat-head screw driver to CAREFULLY pry around the trim of the light 4) remove the light from the connector and replace 5) put it all back together
@@learnsavediy Thanks for the instructions. I tried, but couldn’t remove the trim. I stopped because I was afraid it could break. 😞😞😞
Yay! Thanks so Much
You’re welcome!
How change the temperature in the middle draw?
I believe the middle drawer temperature is based off the rest of the refrigerator. The manual makes no distinction except between fridge or freezer (chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/www.whirlpool.com/content/dam/global/documents/201809/use-and-care-w10422734-revB.pdf see page 10)
How turn on my ice maker it said ice maker off
On the interface board: 1) click "Options" 2) select "Icemaker" and then the error message should disappear 3) click "back" and you're done! Cheers
@@learnsavediy awesome, thanks!
I just got this model whats not cool is the frig doesnt show the current temperature like my 17 yr old ge did. REALLY
Hello. I've tried this several times. While I can see it's changed, it actually not changing it. What I mean is that when I set the desired temp and press confrim, everything looks good. But when I check the temp it shows the same previous setting. I left it thinking it should at least change the next day(maybe it needs some time to go up or down) But it's still the same. Anyone knows why?
Thanks.
I wonder if power cycling the refrigerator might help. I don't have the owner's manual for this fridge but you may find something in there. Could just need a simple power cycle or there could be an issue with the board.
The book came with the fridge only states the installation and simple commands. So frustrating!
Thank goodness for TH-cam!
So 👍 TG for YT 💫
@@learnsavediy You show the temperature change on the refrigerator side but what about the freezer side do you just press the button once again to pull up freezer?
Thanks 🫡
Very welcome. I appreciate you watching
Thank you 🙏🏾 , I will good info 👍🏾
Thanks....🫡
Mi refri no conjela en el friser
Have you cleaned the condenser coils?
Por favor en español