I love these types of bikes! Its like they were sitting in the board room, and were out of ideas and just said forget it, just strap a motor on the leather couch, add an entertainment system, and call it a day!
Would love to see some sort of truck relocate solution to make a little more passenger room. Not a lot of passenger space, especially with a driver backrest on.
Cutting the trim was the most challenging for sure. Measure twice, three times, four tim… cut once. If your going to add chrome edging on either side of the cut pieces you’ll need to make sure you remove enough material otherwise it’ll bind up. Oscillating cutting tool is your friend.
Thanks 😊 so much...I got a 2017 with 6thoudsend miles on it from a harley davidson dealer. But they did tell me how to get it off....good first bagger for the money 💰
thanks for this, I am looking at this or the valquero, for a couple buck more you get more for your money wit this one. top case removal for the commuter win 😁
Want to do the same to my Voyager. Have seen another TH-cam do this also. The only fear everyone has is cutting the trim piece. I've already slotted the trunk bracket just have to get up the nerve to cut trim. Have also thought about putting on Vaquero trim but it is a little bit pricey.
Exactly. I want to do this but I'm afraid to cut the trim piece. Poster fails to mention that he cut it when he initially removes it. I was hoping it was in (2) pieces.
Definitely love the trunkless look. I'm a fan of the Vaquero, owner of 2 Mean Streaks, and keep waffling on getting a Vaquero. I see used Voyagers for sale that are less expensive Vaq's, and seeing this sparks my interest. Have you done the Ivan flash to your ecu? I like to 21" front wheel, performance intake, and exhaust mods for these bikes, and to me they look awesome, just never been a fan of either the Vaquero or Voyager in stock for (obviously than one man's opinion, and you know what they say about opinions). Would love to see a complete walk around from a few feet away without the trunk.
Unfortunately no I don’t. I sold the bike recently. However, it doesn’t really matter so much where you half the trim pieces as long as it’s the same on both sides.
Factory antenna relocated to the lower left trim. I’d consider a shorter antenna tho because the factory one does get in the way of the trunk. Ended up ordering a decal to cover the hole in the trunk.
Really cool! Makes ya wonder why it wasn't made that way. 👍🏽
I love these types of bikes! Its like they were sitting in the board room, and were out of ideas and just said forget it, just strap a motor on the leather couch, add an entertainment system, and call it a day!
Appreciate the time making the video, exactly what I was looking for.
Looks so much better without the trunk
Would love to see some sort of truck relocate solution to make a little more passenger room. Not a lot of passenger space, especially with a driver backrest on.
Cutting the trim was the most challenging for sure. Measure twice, three times, four tim… cut once. If your going to add chrome edging on either side of the cut pieces you’ll need to make sure you remove enough material otherwise it’ll bind up. Oscillating cutting tool is your friend.
Never thought about using oscillating cutting tool. That's one more piece of the puzzle and another step closer. Thanks!
Thanks 😊 so much...I got a 2017 with 6thoudsend miles on it from a harley davidson dealer. But they did tell me how to get it off....good first bagger for the money 💰
I wish my goldwing seat was that easy to remove. Lol. Nice vulcan.
The vaquero is a voyager, with out truck. Looks really good with out trunck.
thanks for this, I am looking at this or the valquero, for a couple buck more you get more for your money wit this one. top case removal for the commuter win 😁
Want to do the same to my Voyager. Have seen another TH-cam do this also. The only fear everyone has is cutting the trim piece. I've already slotted the trunk bracket just have to get up the nerve to cut trim. Have also thought about putting on Vaquero trim but it is a little bit pricey.
Exactly. I want to do this but I'm afraid to cut the trim piece. Poster fails to mention that he cut it when he initially removes it. I was hoping it was in (2) pieces.
Awesome do a walk around how the bike looks without the trunk
Here’s the walk around I did with and without the trunk. Cheers 🍻
th-cam.com/video/MyskqkLC-8Q/w-d-xo.html
@@randomthings2711 looks awesome
Definitely love the trunkless look. I'm a fan of the Vaquero, owner of 2 Mean Streaks, and keep waffling on getting a Vaquero. I see used Voyagers for sale that are less expensive Vaq's, and seeing this sparks my interest. Have you done the Ivan flash to your ecu? I like to 21" front wheel, performance intake, and exhaust mods for these bikes, and to me they look awesome, just never been a fan of either the Vaquero or Voyager in stock for (obviously than one man's opinion, and you know what they say about opinions). Would love to see a complete walk around from a few feet away without the trunk.
Nice job. What kind of decal did you use to close the holes? Thx
Did you move the antenna , or did it come like that ?
Nice Job. Do you have pictures of the trim piece closeup to get an idea of where you/how you cut it? Thanks!
Unfortunately no I don’t. I sold the bike recently. However, it doesn’t really matter so much where you half the trim pieces as long as it’s the same on both sides.
I would pay someone to do that to my bike.
You have to push the seat whyle turning the key, not pull and wobble.
Where did you get the rack for the top case?
Where did you get those bars?
What antenna do you use and did you block off the holes in the trunk?
Thanks, Tim H.
Factory antenna relocated to the lower left trim. I’d consider a shorter antenna tho because the factory one does get in the way of the trunk. Ended up ordering a decal to cover the hole in the trunk.
Don't waste your money on junk bikes like this.