Actually, that turned out to be an excellent video; it taught us not to assume our supply line in still 100% flowing. In my case i wondered why the cold tap was slow: when the furnace man put in the air-return duct he "hid" my poly-B valve, and must have rubbed it to 45 degrees (half off) ! Thanks!
Thanks for sharing! My rental kitchen faucet has no hot water; bathroom is fine, so I know it's not the water heater. Looking forward to trouble shooting [not...] This is helpful!
Another step that could be done while the line is disconnected, back flush it. Put a container under the line with low pressure, remove the aerator and cap it, open that faucet control, then open the faucet control that is working properly. Anything that was between the supply line and faucet should be washed out. For capping the faucet some people use a coin, I have an extra aerator that I put a small piece of plastic I trimmed to size and a rubber gasket.
My master bathroom sink faucet has had low water flow from the cold side since I moved in. When I tested the supply line a bunch of dirty water gushed out. I had to clean the faucet's screen too. I think my city has turned off the neighborhood water several times, even before I moved in, to build out the water lines for 2 adjacent developments being built. I think when the water was turned on, the pressure removed gunk from the pipes. Now I just need to determine how to reduce the amount of time it takes for hot water to reach the kitchen and hallway bathroom sinks.
Brian, I recently had problems with the Kohler back braided supply lines, ... brand new, I used extreme care while trying creating a loop, ... I just think the black supply lines are poor quality
Great video Brian, I always love it when you have plenty of room like that to use wrenches 😂. I wonder what was blocking the flow it didn’t look like you got any trash out?
![[LIVE] : ONE ลุมพินี 82 วันนี้!! คู่เอก | ยอดไอคิว vs อับดัลลาห์](http://i.ytimg.com/vi/hSsyTl_9bqs/mqdefault.jpg)
![CAMPปลิ้น | EP.82[2/2] เมาท์มอยกับ 3 สาวเพื่อนซี้ ที่พร้อมขยี้พ่อหมีได้ทุกเมื่อ](http://i.ytimg.com/vi/Wwn7WnylNtQ/mqdefault.jpg)
Love the real time troubleshooting....thanks!
Your welcome. I hope it helps someone.
You nailed it! Thank you so much for this helpful video. Yes, count me as a Kohler customer who has this problem.
Ah thanks this is so helpful for me the woman to attend to plumbing alone properly. Cheers
Thanks for the tips Brian! The install that you completed is still going strong! No kinks here!
Glad to hear that. Thank you.
This is exactly what I needed thank you
Actually, that turned out to be an excellent video; it taught us not to assume our supply line in still 100% flowing. In my case i wondered why the cold tap was slow: when the furnace man put in the air-return duct he "hid" my poly-B valve, and must have rubbed it to 45 degrees (half off) ! Thanks!
Thanks for sharing! My rental kitchen faucet has no hot water; bathroom is fine, so I know it's not the water heater. Looking forward to trouble shooting [not...] This is helpful!
Love this channel and the comments. Im a rookie trying to make a living. Definitely a go to for me
Thank you. We are trying and learning as well. Never stop learning.
Definitely love the headscratchin trouble shooting style video brother cause that’s where it has to start and is the hardest part most of the time
I think so as well. I really wanted to take it apart, but got lucky. Thank you Steve!
Another step that could be done while the line is disconnected, back flush it. Put a container under the line with low pressure, remove the aerator and cap it, open that faucet control, then open the faucet control that is working properly. Anything that was between the supply line and faucet should be washed out. For capping the faucet some people use a coin, I have an extra aerator that I put a small piece of plastic I trimmed to size and a rubber gasket.
I need to look into an adapter to cap the aerator. Thank you.
Thank you! This added step worked for me. Much appreciated!
My master bathroom sink faucet has had low water flow from the cold side since I moved in. When I tested the supply line a bunch of dirty water gushed out. I had to clean the faucet's screen too. I think my city has turned off the neighborhood water several times, even before I moved in, to build out the water lines for 2 adjacent developments being built. I think when the water was turned on, the pressure removed gunk from the pipes. Now I just need to determine how to reduce the amount of time it takes for hot water to reach the kitchen and hallway bathroom sinks.
I was just dealing with some of that from a bad main water line install to a friends house.
Very well presented, clear instructions and nice live recording. Schweeet !!!
Any tips on how to do this with a single handle faucet
Great tips
Thank you Jason.
Good job, again.
Brian, I recently had problems with the Kohler back braided supply lines, ... brand new, I used extreme care while trying creating a loop, ... I just think the black supply lines are poor quality
Great video Brian, I always love it when you have plenty of room like that to use wrenches 😂. I wonder what was blocking the flow it didn’t look like you got any trash out?
I know Britt. I did not really feel any resistance when poking either. I'm just glad it works for them.
Is that a Pfistter faucet? If so, it has a lifetime replacement warranty. Maybe Kohler has similar warranty.
Around 4:15 it appears the black line is kinked.
Phantom plug.... weird
I couldn't see, was that tee bull headed?
hmm maybe you just unkinked it moving stuff around
I thought about that as well Greg, but both are pinched the same way. It is a weird set up
Good poking.
I think that is what got it hooked up.