Nicely picked and really lovely pins . Yes ,threading closes up the chamber and creates a burr around the rim of the chamber . Use a drill of the correct diameter to open it back up again and recut the thread - I used repeat this four or five times for a smooth action! It's still catchy though . The rim needs extremely gentle filing so as Not to remove anything off from the core ! Enjoyed that mate 👍 Cheers 🍻 🍻 🍻 🍻 🍻
Very good to know! 4/5 times? I think I tried serrating once and it made everything stuck, now I know why 😅 Thanks for watching and commenting!! Cheers 🍻🍻
Thanks! Oh, it is really simple, and you can do it with a simple metal hacksaw. Just cut at the position where the screw hole is, and you will cut through in less than 2 minutes. I have to check if I still have one around which wants to be cut 😅
I made a short "2-4-1 two for the price of one" which gives you slight idea. But it's very easy - you don't need to worry about the 'actuator' or other shyte that might fall out! Cheers 🍻
![This door lock has a very special keyway, the DOM RS Sigma picked and gutted [324]](/img/n.gif)
Nicely picked and really lovely pins .
Yes ,threading closes up the chamber and creates a burr around the rim of the chamber . Use a drill of the correct diameter to open it back up again and recut the thread - I used repeat this four or five times for a smooth action! It's still catchy though . The rim needs extremely gentle filing so as Not to remove anything off from the core !
Enjoyed that mate 👍
Cheers 🍻 🍻 🍻 🍻 🍻
Very good to know! 4/5 times? I think I tried serrating once and it made everything stuck, now I know why 😅
Thanks for watching and commenting!!
Cheers 🍻🍻
Well done
Thank you very much 🙏
I have this lock on my front door. My friend had one as well and lost the key so I just snapped the lock and unlocked the door with a screwdriver😆
Oh, lol yeah snapping is still quite effective against euro style locks 😅
Thanks for watching and commenting 👋
Nice open! Can you do a video showing how to cut a double ended euro in half to have 2 locks? I can’t find a video on it.
Thanks! Oh, it is really simple, and you can do it with a simple metal hacksaw. Just cut at the position where the screw hole is, and you will cut through in less than 2 minutes. I have to check if I still have one around which wants to be cut 😅
HVLogic has also shown how to do it with an angle grinder here: th-cam.com/video/0n70zZw7_aA/w-d-xo.htmlsi=o7mQbuwv_uz_0V5J
@ I have a dremal. That middle piece in between the c clips is where I get confused.
@ Exactly what I was looking for! Thank you 🙏🏻
I made a short "2-4-1 two for the price of one" which gives you slight idea. But it's very easy - you don't need to worry about the 'actuator' or other shyte that might fall out! Cheers 🍻
Nice picking. These are paper thin serrations! I hope they do not deform upon repeated picking.
Thanks 🙏 Yeah, a good reminder to always use light tension in challenge locks 🤣
Thanks for watching and commenting!