Sir apka g base k video se mene flute bana rakha tha but mene thikness thik nahi rakhi is liye wo g# ho gaya😅😇lekin bohot A6a baj raha hai thanks a lot sir
It would help more if u attach a side screen with monochromatic tuner showing every note while you play, definitely this is going to save a lot of dent on music enthusiasts pockets. Please consider this request
I followed your video on the Bansuri G# PVC Base and built it. Following the measurements exactly, my PVC Bansuri matched perfectly. Now I will also try to build the Bansuri E Natural Base thanks to the measurements you kindly included in your video. Can you tell me, how do you calculate hole distances? Is there a formula to calculate the various measurements? I assume that there should be a numerical coefficient, for example, if I have a Bansuri G# Base and I want to make a Bansuri E Natural Base of which I know the total length, I could divide the length of a Bansuri E Natural Base with a G# Base, and use the result to add to the distances of the holes of the G# Base to obtain the distances of the E Natural Base... Or is it something simpler?
Hello Sir! These measurement varies according to the different makers. Is there a standard book describing the standard measurement for each of the scale.
Hi, I followed the measurements accurately but my flute is giving D# scale....can you suggest the reason why? I wanted to make E bass flute... I have double checked the measurements...everything is as per you told... Length 76.5 CM Diameter 25mm Holes diameters are also correct
I have also make one flute but with 30 mm pipe which sounds perfectly in d# i think by mistakenly instead of 25 mm pipe you used 30 mm pipe that's why it sounds like d#
I definitely apologize about that but I search all around near me but didn't find that piece of rubber sheet But next time I will definitely take care of it 🎵🎶🙏🏻
Sir I wanna make E or F base flute.. 🙂 But Mera pipe ka inner diameter hey 2.3cm/23mm then how can I make it....? Plz help me....! Giving a short measurement.. 🙂 I'm not so good in English or Hindi.. I'm from Bangladesh.. 🙂
I'm not a professional flute maker i make these flute by my own experience i think you have to buy pipe to make flute which is not much expensive in 100 rupees you can make 2 E base flutes
For Measurements 9:27 I hope this will help you to find Measurements
Khupach chhan saheb
Thanks a lot 🙏🏻🎶❤️
Bahut hi badhiya sirji 🙏🏻🙏🏻🌹🌹🙏
Thanks sir
Mastach sudeshji munde sir
Thanks a lot vahini ❤️🎶🙏🏻
Bahut badhiya sir👌👍
Thanks a lot kaku ❤️🎶🙏🏻
Sir apka g base k video se mene flute bana rakha tha but mene thikness thik nahi rakhi is liye wo g# ho gaya😅😇lekin bohot A6a baj raha hai thanks a lot sir
That's great
It would help more if u attach a side screen with monochromatic tuner showing every note while you play, definitely this is going to save a lot of dent on music enthusiasts pockets. Please consider this request
Music sound is dominating your voice. Could not here properly. How ever the flute you made is excellent. Thank you.
Next time I will take care about it thanks for valuable reply 👍🏻
Great work.. 👌👌❣️
Thanks a lot dear ❤️🙏🏻🎶
Bahut Acha laga
Mastach👌👌👌
Thanks Tatya ❤️🎶🙏🏻
Please make a detailed video like this for c# middle flute.
Wahh Sir, Very good tutorial and great detailed explanation!💐
Many congratulations 💐
Thanks a lot dear 🎶❤️🙏🏻
Nice 👌❤
Thanks a lot ❤️🎶🙏🏻
I tried with UPVC and it worked fine
Wow nice keep it up
Nice song
Thanks a lot 💕🙏🏻🎶
Nice
Thanks a lot Tatya
Classic
Thanks
Very nice
Thanks a lot 🙏🏻🎶❤️
I followed your video on the Bansuri G# PVC Base and built it. Following the measurements exactly, my PVC Bansuri matched perfectly. Now I will also try to build the Bansuri E Natural Base thanks to the measurements you kindly included in your video. Can you tell me, how do you calculate hole distances? Is there a formula to calculate the various measurements? I assume that there should be a numerical coefficient, for example, if I have a Bansuri G# Base and I want to make a Bansuri E Natural Base of which I know the total length, I could divide the length of a Bansuri E Natural Base with a G# Base, and use the result to add to the distances of the holes of the G# Base to obtain the distances of the E Natural Base... Or is it something simpler?
Yes off course there is some mathematics behind these length and hole size but I don't know what exactly the formula is.
@@swaradhanasangeetvidyalaya8757 Thank you.
Sir G base flute making video dijiyega plz...
Sir how to make last tuning hole aur kaha karna he wo toh bataya hi nhi
Please f scale ki flute bhi banao 17:49
thumb hole at the bottom at what distance and size for a basic flute?
For which flute i mean which scale
Tuning charts bi likha videos karenge
Next time
Hello Sir! These measurement varies according to the different makers. Is there a standard book describing the standard measurement for each of the scale.
No sir I don't think so
Sir tuning hole ko line k neeche banana h kya?
ऐसें बनायिये जीससे आपको नीचे का तीव्र म थाई से बजाने मे आसानी हो
Saare scales ka tutorial bna do please
मेरे पास सिर्फ 3 ही थे
@@swaradhanasangeetvidyalaya8757 achha agar possible hai toh bna dena please
Sir e# 76.5cm g#62 cm length
Happy Guru Poornima sir
Thanks a lot god bless you Same to you
Sir main yah E base ki flute Banai hai per Meri Flute ka first hole 11mm ka ho gaya hai to usmein e base flute ka Jaisa sound aaega kya
शायद नही
मतलब अब आपकी बांसुरी सुर में थोड़ी गड़बड़ बजेगी
Sir starting mei kon sa gaana bajaya batado please kyuki maine apke tutorial se G# flute banayi aur bhot badhiya baj rahi hai thanku
Thanks a lot 🙏🏻🎶❤️
आनेवाला पल जानेवाला है
@@swaradhanasangeetvidyalaya8757 thanku sir abhi e base bhi banaounga
Last wala tunig hole kaha karna he agr bajane wala lefty hoto
आप बांसुरी हाथ मे पकड़िये और बजाने का प्रयास कीजिये तब आपके जाँघ पर जहाँ बांसुरी लगती होगी वहाँ मार्किंग कीजिये और hole कीजिये
👌
Thanks a lot dear ❤️🙏🏻🎶
Sir pipe size 25mm and thickness 2mm ka Matlab inner diameter 23 ya 25mm please bataye. Thanks
Inner diameter 23 bhi rahega to bhi bansuri bajegihi
मैंने तो बस 25 mm का पाइप लिया था बस और 2mm thickness ही थी लेकिन बांसुरी काफी हद तक सुर में हैं।
@@swaradhanasangeetvidyalaya8757 Ok thanks for replying.
💕🙏👍
Thanks a lot ❤️🎶🙏🏻
Does cork thickness matter ?
No
Just fit it 5mm upper part of blowing hole
@@swaradhanasangeetvidyalaya8757 i didn't get you sir...can you explain.
आपको ब्लोइंग होल से 5mm पेहले इसको फिट करना है फिर आपके कॉर्क की साइज कोई भी हो मतलब कॉर्क का आखरी पार्ट ब्लोइंग होल से 5mm की दूरी पर होगा 👍🏼
@@swaradhanasangeetvidyalaya8757 thank you sir for reply😊
Thank you sir
Most welcome
Thank you sir .
Make it and give your valuable feedback 🎶🎶🙏🏻🙏🏻❤️❤️
jitni sundar aapki voice hai utna sundar aapka bajana hai dada . kya aap yeh flute sale karoge
Thanks a lot और flute जरूर सेल करना शुरू करने वाला हुँ
Sir iska thikness or internal diameter kitna Hai
Sir I got 25.4mm diameter pipe ,is it work for this ?
Yes
@@swaradhanasangeetvidyalaya8757 thnx sir
Sir inner thickness for e base is 23mm ? Or 25mm
25 mm
Sir shop pe 1 inch ka pipe batana hai?
@@akshaykhati6509 बनता है 👍🏻
Yes 1 inch
Thanks
🎶🙏🏻❤️
The distance from Cork to the Blowing Hole is 1.6cm(16mm). Is it right ???
Please reply Sir 🙏🙏🙏🙏
Sorry for late reply blow in it and then set it according tonal quality of flute
I was waiting for your e base and d base..will try this tomorrow and will share the results..if i can make the flute
Definitely sir please give me your valuable feedback
Can you make d bess flute plz 🙏🏾
Tube diameter in mm/cm please.
e base kitne ka milega
Cork me thormocal laga de bhai
लगा सकते है लेकिन हवा के बहाव से वो रुक नही पायेगा
Ye pipe ka inner diameter kitna hai?
25mm
C middle lambi hoti hai c # se
Sir ye kon sa raag hai
Last me yaman hai aur baki shudhha swar hai
aawaz to aa ni ri bs music music 😢😢
Sorry wo editing karne ke baad suna nahi tha
This video is for a C middle flute. Not an E base.
Total cost kitna aaya sir
Near about 100 rupees
और जरा सा, और प्रैक्टिस करना पड़ेगा
जी जरूर
Hi, I followed the measurements accurately but my flute is giving D# scale....can you suggest the reason why?
I wanted to make E bass flute...
I have double checked the measurements...everything is as per you told...
Length 76.5 CM
Diameter 25mm
Holes diameters are also correct
I have also make one flute but with 30 mm pipe which sounds perfectly in d# i think by mistakenly instead of 25 mm pipe you used 30 mm pipe that's why it sounds like d#
भाई बाजू में तो स्पीकर रखे हो
हा रखा हूँ लेकिन बजा तो बाँसुरी ही रहा हूँ 💕🎶🙏🏻
Music kam karna
Abhi next time dhyan rakhunga
Please don’t use slippers next time🙏e , coz this is the purest lord instrument ♥️
I definitely apologize about that but I search all around near me but didn't find that piece of rubber sheet
But next time I will definitely take care of it
🎵🎶🙏🏻
@@swaradhanasangeetvidyalaya8757 😊🙏
Sir I wanna make E or F base flute.. 🙂
But Mera pipe ka inner diameter hey 2.3cm/23mm
then how can I make it....?
Plz help me....!
Giving a short measurement.. 🙂
I'm not so good in English or Hindi..
I'm from Bangladesh.. 🙂
I'm not a professional flute maker i make these flute by my own experience i think you have to buy pipe to make flute which is not much expensive in 100 rupees you can make 2 E base flutes
@@swaradhanasangeetvidyalaya8757Sir I searched for this type of pipe.
But I didn't find it...🙂
By the way thank you for replying me... 😊
Kya vedio banayi hy yaar . Pura background music hi sunai de raha hy... useless totally
एडिटिंग नहीं समझ आता था तब जी अगली बार से पुरा ध्यान रखूँगा
The distance from Cork to the Blowing Hole is 1.6cm(16mm). Is it right ???
Please Reply sir 🙏🙏🙏🙏
Yes
The best way is play the flute and then adjust it accordingly