Peugeot 207 - BE4 Gearbox Overhaul (Part 1)
ฝัง
- เผยแพร่เมื่อ 10 ก.พ. 2025
- Ronke's DIY Workshop
In this series of videos I plan to record as much as possible of the process of overhauling a front wheel drive gearbox.
From now on I will strive to upload one episode every sunday evening.
You guys can also follow me on social media through
FACEBOOK
goo.gl/aMNnOv
INSTAGRAM
goo.gl/nidA4e
TWITTER
goo.gl/dzhGY6
Belgian Peugeot Forum
www.peugeotforu...
Привет подскажи пожалуйста задняя передача где находиться в коробке сзади? Проблема выбивает переодически.
Yaa my car 207 RC/GTi where can i get cheap synchro rings
Hi, is it possible to replace the input shaft bearing from the clutch side rather then opening up and dismantling the whole gearbox to get to it? appreciate your advice
K Jay no, that would be impossible, since it sits up against a lip from the inside.
What is the code of the gearbox you worked on? Mine is 20DM12 and the input shaft bearing seems to be a ball bearing rather than a roller bearing, hence my question for access from the cluch side. Thanks and a good job!
K Jay I didnt write down the code and I cant remember it anymore. Sorry about that. Thanks for the positive feedback ;)
Hi Ronke, where did you get the written instructions?
Hi Felix. You can download them from PSA Servicebox.
You need a login account and a VISA card, since its a paid part of the website which holds the technical instructions. It's about 5 euros for 1 hour of full access. Try and think of multiple instructions which you might need for your car. And you can 'print' them as an .xps file, which saves it to your harddrive to print on a later time.
Ronke's DIY Workshop Hi Ronke, thx a lot for the quick response. Cheers Felix
whats the music at 7:05 ?
Hi Ronke, I have the same gearbox in a 2012 Peugeot 508. Just a question are the gear changes stiff when it's cold out side and is it normal for these gearboxes to whine a little bit, not very loud just a faint whine when decelerating and down shifting. Car has 52500 miles so around 85000 kms
TheCheesenChips hey, thats kind of subjective, but I dont find them perticularly stiff...
Never had any different reference material, as my previous cars always had a BE4 box and even my new one does.
If it starts to whine, maybe change out the gear oil and see of it gets better, if not, do keep an eye out and listen if it ever gets worse.
Hy chips, did You repair whining from gearbox? I have the same engine&gearbox, and also whining at decelerating.
They changed all the bearings in the gearbox, like input shaft and diff bearings and it was quieter for a few months but started whining again. Tried thicker oil but it grinds when cold, so just left it there and lived with it.
@@TheCheesenChips Thanks for answer. Have You tried Liqui Moly gearbox additive MoS2 ? Thicker oil, like 75w90 ?
I forgot ask You, do You have jerk when lift off accelerator mostly 3rd, 4th and 5th gear?
@@manwhoneedlove I have tried it twice but no difference, also tried the xado but again no difference, they say it's because u cannot adjust pre load on the bearings that's what causes the noise.