Breakthrough Suppressor Cleaner
ฝัง
- เผยแพร่เมื่อ 7 ก.พ. 2025
- Breakthrough Suppressor Cleaner, 1st time using it and liking it so far. Silencer is a new @DeadAirSilencers Mask and has a little over 600rds. through her. Thought the cleanser did quite well and curious how well it'll do after a 1000rds.
Mask can go way longer between cleanings. I think it says 2000 rds in the manual …Look into “anti spatter nozzle shield spray” you’ll be able to wipe the baffles clean with no effort if you pretreat and spay a little before you go shoot ,it’s mind blowing seriously.
One of their recent videos says around 1500 but have stated they have seen more. I just wanted to test the cleaner. It's one we got in at work and rather have 1st hand experience when asked.
I'll have to look that up, never heard of it
I waited 1100 before the first cleaning 😂 of my MASK. A wooden stick became my friend in getting the baffles out. So I clean now at 400 - 600, and white lithium grease everything - my life is much more enjoyable. ❤. 22Lr is what it is.
Lol, I'm almost to 2000rds to test out Boretech Silencer cleaner
@@Keep_It_Loaded please post the cleaning. I will be interested to see your results - thanks !
I used wipe-out bore foam and it cleaned my baffles in about 1hr. Put the baffles in an empty mayo jar and sprayed the foam in. Stirred it around about every 15 minutes adding a touch of foam as it got low. Came out 95% clean and a bit of wiping finished it.
Oh nice
What brand you use? I have titanium baffles
@ I just used CLR on my TBAC end caps (Ti) and it worked fine. I used DIP (peroxide and 5% vineger) to clean SS baffles over night.
I used DIP today for 5hrs and the baffles came out 98% clean. Next time I will do overnight. I used a quart canning jar and lid. Mixed 2 cups 5% vinegar and 2 cups peroxide. You could see the scrubbing bubbles eating the lead off. Just wear PPE and do not get liquid on skin or breathe fumes. It makes lead acitate when disolved. Keep warm as it works better when warm. Maybe in a warm oven or warm pot of water (125f).
👍🏼, never tried dip
I've had good luck with CLR. ??? Maybe will check this out.
Something else I want to try would be to spray everything with anti-spatter spray for welding. It keeps weld spatter from sticking to areas around welds, and I suspect that it would keep stuff from sticking in a suppressor.
Interesting?
Have heard about the CLR but have still yet to try it.
Great tutorial.
Thank you
I’m using it with ultrasonic cleaner, it’s like magic
Oh nice
@@Keep_It_Loaded I tested it with an old mule Gemtech Outback. It literally melted all the lead, I couldn’t believe it. My take away is it works magically on non aluminum cans, the ti baffles looks brand new after it’s clean. Aluminum baffle stained a little but I guess that’s as expected.
Any feedback on how the solution reacts to anodizing when used with sonic cleaner?
@@Buletspunge555 okay, let me preface that the Outback (full aluminum with updated ti and alloy baffles) was F up previously from Simple Green in Ultra sonic cleaner. Some of the anodizing was gone. This new stuff I dipped both tube and baffles and let soaked for 12 hours and ultra Sonic it twice at 10 minutes cycle. There is some lightening of the finish but I’m not sure if it’s from previous simple green or this stuff. I THINK the tube’s anodized finish would’ve been fine if I just soak and scrub in this solution. The to baffles came perfectly like new and the alloy baffles all free of lead and carbon, but a bit stained. I have no complaints since I use the Outback a lot.
@@pittwm thanks for the feedback friend! I've got a SiCo sparrow on the way, and I'm doing prep homework ;)
Good tip on the ziplocs. I'll use an old spaghetti jar
Lol, I use a Mason jar now. It just lives in the garage for whenever needed now.
@@Keep_It_Loaded thanks for posting. I just grabbed a gallon from the amazon
I want to buy this stuff but idk if it will damage my finish. I have a YHM R2 and a JK armament goat
Yeah, the material of both of those are safe, but yes, you couldn't soak for any extended period without the risk of losing or wearing your finish.
Yea they say it’s not save on Cerakote finishes
i use an ultrasonic cleaner with CLR
A friend of mine does also, but with a diluted solution of this Breakthrough cleaner. I still have not bit the bullet and got one yet.
Wait until you graduate to a 9mm can. I had to put mine in a vise in order to disassemble. Soaked it all kinds of aluminum safe solutions. Still have carbon build up. I used brass brushes. I now understand why folks throw away mufflers and install new. If the gun muffler laws in the states were different.....
Did my Surefire Ryder 9 also but with a different cleaner for testing purposes. I personally am not the biggest fan of aluminum baffles.
ok once you get all the carbon off and its now dirtied up the solution, how do you dispose of the solution once done?
Neighbors yard
You'll need to seek your local laws for disposal of "household hazardous waste". My location shows to dispose of at my local HHW site which is located at my local dump.
Is Breakthrough safe for Aluminum baffles?
Yes. Aluminum, stainless steel, and titanium.
I wonder if cleaning the baffles with Ballistal before even shooting it will help the baffles come clean easier??
I have used Ballistal for years on all my guns and basically wipe them out and they’re clean.
What are your thoughts?
Good video of detailed cleaning too.
Thank you. I'm aware of ballistal but have zero experience of using it.
I coat my baffles in balistol when reassembling. It doesn't hurt, but my baffles are still completely caked in rock hard lead when I clean. CLR is the best cleaner I've used. I have ~8000rds combined through my dead air mask and rugged occulus. I just cleaned them today for the 3rd time. 2-3hr soak in CLR and the baffles wiped clean, zero scrubbing. I just soaked the end cap for the first time, and it didn't appear to hurt the finish. Non-toxic and biodegradable. Highly recommend.
@ Nice!! Thanks for the info. The CLR doesn’t damage the SS? Do you ever use an ultrasonic cleaner for those baffles?
@chadmccormick1412 I haven't noticed any major issues so far. The only change I have seen with the baffles is they had a bronze/gold color/coating when new, and they are now less bronze/gold and have more of a silver color to them. I haven't noticed any kind of pitting or anything. I have never used an ultrasonic cleaner. I had one picked out to buy specifically for cleaning the baffles, but I never did because of how well the CLR works. I'll soak for about 1 hr if it's not completely caked, and a couple hours if it's real dirty.
@@mdees88 Nice! I will have to try that! Do you think the color change is an issue?
I clean my sparrow with rapid fire 5.7x28mm or like 10 rounds of .556
Haha, nice
.22 is easily the dirtiest suppressors to clean. My 9mm and 45 acp cans are basically cleaned once every few years….
Agreed on both parts. Hoping to re-due video again either at 1500 or 2000rds. Currently sitting at 1200. May due testing with Bore Tech brand though to further my testing with that Brand.
Plain old vinegar does the same thing
Good to know
400 more rounds already
ฉันสนใจ ฉันต้องทำอย่างไร ฉันสามารถสั่งซื้อสินค้าได้อย่างไร
🤔yes sir put some of that in a small dish, then put that into an ultrasonic cleaner 🫠 it all melts away.
Oh yeah, another employee at my work is using it that way. I'm still just soaking in a Mason jar