Hardwood Table For $2.00 A Square Foot (Impossible?)...
ฝัง
- เผยแพร่เมื่อ 24 มี.ค. 2021
- I Use Bulk Hardwood Flooring To Attempt To Build A Dining Table With Minimal Tools For A Fraction Of The Price. I built a table using hardwood tongue and groove boards, similar to my earlier coffee table build. The result is a great hardwood surface.
Support this channel on Patreon!
/ amircreator
Follow me on Instagram:
/ a.mere.creator
Videos mentioned:
Off-road Clamp: • Off-Road Smart Wheel C...
Hardwood Coffee Table: • Turning hardwood floor...
Woby Design: / @wobydesign
Tools and materials:
Dining Table Legs 28 x 23 (used in the video, but wrong size and wobbly): amzn.to/2NQsz5X
Dining Table Legs 30 x 28(More appropriate size): amzn.to/3cjHJdq
28 Hairpin Legs (probably a better option for stability): amzn.to/3ciR5pK
Wood Filler: amzn.to/3spcaED
Circular saw: amzn.to/39RkwLf
Drill and driver: amzn.to/2VfxyNr
Belt sander: amzn.to/3c1OkGt
Random orbit sander: amzn.to/3fhd1Rt
400 Grit sandpaper: amzn.to/3d5qNF0
Red clamp: amzn.to/2KWUDQ8
Orange Dead Blow Hammer: amzn.to/3lLXTh6
Compact Router: amzn.to/3eDmnpT
Chamfer Router Bit: amzn.to/3cvEKON
Flush Trim Router Bit TOP Bearing: amzn.to/3dh1rVk
Flush Trim Router Bit BOTTOM Bearing: amzn.to/2XJgdxj
Wood Glue: amzn.to/36Nh3Pi
Varathane Water Based Polyurethane Gloss Wood Finish: amzn.to/2Zn5SbP
Paint Brush, 2-1/2 inch: amzn.to/2NyQiXJ
Old Wood: imgur.com/gallery/FiYNQoU
New Wood imgur.com/r/wood/d2NneLA
OnlyFans: imgur.com/a/F7rsQPM
Manikin: amzn.to/3slfi4d
Japanese pull saw: amzn.to/2Vaia4O
Music
00:45
Artist: Nathan Perdomo @Nate Perdomo
TH-cam: • [Alternative, Indie] N...
Instagram: / nathanperdomo
0:00
Arrow Instrumental - Andrew Applepie: www.andrewapplepie.com/#home
Gear
Main Camera: amzn.to/3aujLtW
Lens 1: amzn.to/3rhnjX2
Lens 2: amzn.to/3rcJ8qT
Backup Camera and lens: amzn.to/2RF5V24
Disclaimer: Some of these links lead to products and tools used in the video. If you click, or buy something there, I get a small commission, but it doesn't change the price for you. If you would like to support me, have a look.
"You Can't Make A Table From Hardwood Flooring"...
Disclaimer: This video is for demonstration purposes only. I am not responsible for any injuries caused from attempting the actions in this video. This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. - แนวปฏิบัติและการใช้ชีวิต
let me know what you think! Also here is my other video on the Hardwood Coffee Table: th-cam.com/video/JVqCEDQ6Cl8/w-d-xo.html
I love how you showed all your mistakes as well. Thank you
The elegance of the simplicity in this is just amazing
The table looks sharp and great colour. You could try drilling tongue at a 45 degree angle then putting the nail in. It saves filling all those nail holes. I've done eucalypt floors and we actually clamp the boards together. It's usually shrinkage in the timber that happens, so no need for a gap. Not criticising what you've done, just some suggestions to think about in the future.
I did this 7 years ago for our dining table and it has been amazing. I used 6" wide hand scraped Maple from a local flooring store. They only had two boxes left. Discontinued product and leftover from an install. I got it for $60 and its beautiful. I did a breadboard end design, and trimmed with some Maple from a local wood store. I have left the planks finished as they were from the box and it has been so durable. We now have a 2 year old boy and it's getting some serious love.
Nice job!
good to know it holds up over time
Very nice, thanks for taking us along the journey of building this beautiful table. It’s also great to know this is even possible, as it opens up a lot of creative possibilities, like pre-staining the pieces in slightly different shades before assembling them.
That's a great idea!
Awesome job. Your patience is refreshing. 👍🏽👍🏽
I enjoyed this immensely and am happy to have found your channel on Reddit. Subbed.
Glad you enjoyed it, thanks for the feedback, and welcome to the channel :)
Man that looked ROUGH until . But you persisted and kept at it, and it looks BEAUTIFUL in the end!
What a great idea and design! And thank you for suffering for us as regards spaces between the pieces of wood. I would have thought such spaces were necessary because the wood widths were not exact enough to create a clean surface... but you proved they're VERY precisely cut!
Now, of course, the one thing that bothers me about the table: From the time when I was only about four years old and was investigating everything in the house... and I saw that the bottom of the dining room table was not finished... I've always complimented designs that finish even the side that nobody would theoretically ever look at.
But hey, the bottom of your table looks great! UNTIL you see that those legs are held in place by flathead screws though the table leg has cylindrical mounting holes. Come on! Pan head or Truss head screws, or countersunk through holes in the leg assembly, are the right kind of screws to use here.
Thanks for the project!
I can’t believe so many people aren’t subscribed! This is like one the best maker channels on TH-cam IMO. Keep doing what you do I love these videos they are so zen and really inspiring when I want to make something in the workshop :)
:)
I did a double take. He has a good amount of subscribers. It’s so relaxing to watch. Amir makes great projects and videos
He just got one more!
This simplicity let all the project amazing, congratulations, Hi from Brazil
These vids are therapeutic, I subbed so fast my man
dam that came out so good. i install hardwood floor for a living but never thought about doing this thank you so much
im confused for your nailing straight down, why not go in on a angle?
Finally a use for the load of spare veneer flooring tiles I’ve got laying around in a cupboard under the stairs
Great content. Excited a new video came out.
Very nice step by step instructions. Have some extra wood flooring and will be making a desk using a similar method, albeit its pre-finished.
Everyone here commenting on such a nice table but they all miss the best part of this video at the end of it.
You know what I'm talking about.
Ah yes, the man with eyes as sharp as a razor
My meatball sharp meatballs have identified the crem de le mem
The reason we’re going through this trouble is…because it’s freakin genius! I love the outside the box thinking!
ikea gerton hardwood tabletops are on clearance right now in some stores if you have one nearby; Solid wood and only $50 for 61"x29.5". about $4/sqft with a lot less work.
Your work looks great but here's an option for those of us without $3000 worth of tools.
The tools hardly cost a quarter of that. Building your own things is different than buying, people build because they want to. Don't get me wrong, I actually own a gerton table top, but they're on clearance because they're being discontinued. Maybe you could buy a table top and modify/ stain it for some personalization.
Nice project Amir!
Hey Amir, love the project! One question: why did it matter that you had the groove facing out rather than the tongue?
It has to do with the way the boards lock together. You can snap a grooved edge over a nailed-down tongue, but you'll bust the tongue off trying to do the reverse.
@@carmium Got it, thanks for the tip :-)
rotate the top around or cut a m/m or f/f conversion strip. Gaps? route a shallow groove ( with straight edge ) and inlay thin strip slightly proud of top and sand flush. contrasting wood color if you wish. gets rid of the small top bevel of the small top bevel on pre-finished strips.
@@MrBonners they make spline, we use it for reversing the direction of a wood floor to install into another room so you can have 2 grooved sides facing each other, then glue a spline in the middle of the 2 and nail the tounge of the new board. Hope this helps anyone in the future, spline is very cheap
Really nice table and sick music too during 4:48
New subscriber, 👍🏼 thanks for the video. I picked up a huge pile of used tounge and groove last fall and thinking about redoing my parents bathroom.
was waiting for the next amir video
Absolutely beautiful result! Well done!
Thank you for the feedback :)
Love this. You are a stud Amir.
I’m going to support the heck out of you on Patreon once I get a job. Your content shouldn’t be free man. Keep up the good work👌
You having to start over: 👼
Me starting over: 😈 🔥 💥
I'm going to make a kitchen countertop for your RV using this method. I love this!!!!!
Did you do this and how did it go?
Lovely!
Fantastic!!!!
Cheers 🍻
Rock on!
Solid table, solid video! Subbed for sure
Welcome to the channel :)
I really enjoy your channel! Soon I might attempt a copycosmo project at which point I’ll pay a lil somethin to your patreon. Thanks for the content. Blessings 🙏🏻
Can you really glue the solid wood planks to plywood without worrying wood movement?
Couple of questions. Why do you go with water-based polyurethane? Would you not make the table again with the gift card gaps? Great vid!
Water based dries in 20 minutes and since the workshop is outside so many bugs would get on it if it was any slower
I wasn't sure if you were mimicking WOBY or not. Then the clip rolled. Lol
Very nice
I made my very first table out of bamboo flooring and plywood underneath, and then two thin pieces of oak to add a flair to it. It could probably support a thousand pounds lmao. I figured why not get the most expensive and beautiful hardwood I can get. But unfortunately I don't have that many good woodworking tools so the desk ended up with a slight curve to it... Though for my first time wood working I'm quite proud. I'll probably make another for fun.
We don't make mistakes, we have happy accidents.
Lol, ala Bob Ross?
I did it again, i pussed like button during the first ads
:)
Love the video! About to buikd a desk for the Mom in law based on this. One question if i can bother you!
Would skipping the space all together have been worse? Or is that space and filler step necessary because of wood movement. Thanks!
Shrek is love, Shrek is life
Nice project. is the top pretty heavy? Also without a center bar do you find the table go side to side too much?
groove on the wrong side? just rotate the sheet around or fill groove with cutoff strip of tongue or groove strips, or route a female/female, male/male conversion piece . Router with a straight edge, a thin shallow inlay groove down the gaps and fill with a thin strip ripped from a long strip, slightly proud of top and sand down. gets rid of the small top bevel on pre-finished strips. contrasting coloured wood for fun.
Yes very beautiful table you build here im making similar one
Maybe a tip to help someone but If you hit a flathead screwdriver into the ply substrate next to the board you can use it as a lever to pull the planks tight while you pin them down to minimize gaps
The stuff you make is awesome but the vibes are even better:)
The table looks amazing! I am curious though. Instead of nailing the hardwood down. Would it have been better to use a hardwood flooring stapler? With the correct size staples that wouldn’t penetrate the backboard.
What did you use for the edge of the table top to make it smooth?
Was this new or reclaimed hardwood flooring?
Is this still holding up looks great by the way thinking about doing this myself
dO YOU HAVE A LINK FOR THE WOOD?
whoever disliked this doesn't appreciate art
Wait, wouldn’t the ends fail due to wood movement still on this?
How you gonna watch this and not subscribe???
By the way, what’s that red thing do on your drill?
Magnetig bit holder :)
@@A.Mere.Creator - Oh I see. Would you mind sharing the link to buy it? It wasn’t in your tool list in the description. Also, how do you like it?
It works great. makes it faster to switch bits, but I"m not sure where I got it, they all work the same tho, just find one that speaks to you :)
8:11 :D
You've heard of "You Can't Make Furniture From Construction Grade Pine", now get ready for...
If your just glueing it down the direction doesn’t really matter
Hey Amir, I have an older bamboo cutting board that has developed some fairly deep cracks (when I got it, I didn't take care of it properly, I.e. didn't oil or wax it). Would you have a suggestion for a filler for said cracks? Its my biggest cutting board and I don't want it to give out on me just yet!
Wood filler like that are not tough enough for something like a cutting board, your best bet would be to close the gap with clamps and glue, but if they’re too big, epoxy will do it th-cam.com/video/iaIW798vO3Q/w-d-xo.html
Ahhhhh... I thought this was a $2, square, foot table.
Wow, that's totally a valid interpretation haha
@@A.Mere.Creator I was like, there’s no way. Unless it were tiny? Haha.
Have to fill gaps.....or epoxy!