Two things come to mind. There seems to be only the option for a smoke lens fixture and not a red light fixture as well. Also according to my own experience (and you validated it on video) that the controller has short leads. The only way you are getting to unplug those bags is by getting under the seat where the connections are every time you want to pull the bags. Fortunately Custom dynamics has an extension wire that goes from the controller with enough wire to move the quick connect to the frame rail so you're not removing the seat as in the video shown above. Don't know if Advanblack has that same extension wire, but I didn't get it. I happened to change out the Custom dynamics bag light which only goes on the back side and not the side like the advanblack light. I had to go that route because I found out that advanblack saddlebags are narrower than stock and so the money I spent on the Custom dynamics lighting was wasted when the light didn't fit tight to the back of the bag. Using the advanblack light and some of the custom dynamics wiring extensions I ended up with a better fitting light, but now I have smoked bag lights where ALL my other tail light fixtures are red. Oh what a world what a world....
I already have the Custom Dynamics rear saddlebag lights and was about to order the latch lights earlier but forgot. I'm now glad I forgot because I'll be ordering these instead.
The lights look great. Maybe it's the trucker in me, but here's a suggestion. I would have amber running lights and non-sequential turn signals on the sides and only red running lights with red sequential turn signals on the rear.
Nice, I already have the Ciro 3d filler panel lights and latitude tail light. This would add some much needed light to the sides of the bags and a little more in the rear. A little more light is a good thing with people not watching for bikes like they should.
From the video, the connection from the Saddlebags is under the seat. Does this mean you’re required to remove the seat every time you want to remove the Saddlebags? Or can the connection be just outside the saddlebag, like on the Custom Dynamics Turn Signals? I have the Sequential Custom Dynamics Turn Signals, but like these new Advanblack lights. 🏍💨🏍💨
@@Advanblack 'a side pipe'? It's unclear to me what that means. I'm in a Facebook group with about 5K other 23.5 CVO and '24 Glide riders and the general consensus is that they don't fit (wider bags).. We're waiting on a solution - so if you want to send me out some, I'll make a TH-cam showing them that they do in fact fit.. Custom Dynamics just released some low-profile rear lights, but I prefer the Hyper LED's because they wrap around.. and they look much cooler, admittedly..
@Advanblack Nice!!! That would be right on time!!! I'm currently in the process of looking for a set and if y'all do decide to produce, I will definitely buy!!! Keep dropping those videos. I've learned alot.
@@Advanblack are those bags and fender coming to market any time soon? I've been hoping you guys or Hogworx would jump on that. These other companies are out of control with their prices.
These lights are good looking but I think it sucks that you have to remove the seat in order to remove the saddle bags. This means that I will not buy these.
So you pretty much have to take your seat off and pull the wires every time you need to remove the bags? That’s pretty lame for a product selling for $260+
Two things come to mind. There seems to be only the option for a smoke lens fixture and not a red light fixture as well. Also according to my own experience (and you validated it on video) that the controller has short leads. The only way you are getting to unplug those bags is by getting under the seat where the connections are every time you want to pull the bags.
Fortunately Custom dynamics has an extension wire that goes from the controller with enough wire to move the quick connect to the frame rail so you're not removing the seat as in the video shown above. Don't know if Advanblack has that same extension wire, but I didn't get it. I happened to change out the Custom dynamics bag light which only goes on the back side and not the side like the advanblack light. I had to go that route because I found out that advanblack saddlebags are narrower than stock and so the money I spent on the Custom dynamics lighting was wasted when the light didn't fit tight to the back of the bag. Using the advanblack light and some of the custom dynamics wiring extensions I ended up with a better fitting light, but now I have smoked bag lights where ALL my other tail light fixtures are red.
Oh what a world what a world....
I was about to buy custom dynamics saddlebag Bagz lights and then found this today. This is definitely way better choice. I am buying it!
I like that light. Keeps you from having to do latch lights and drilling extra holes in your bags.
exactly! Thanks for checking it out
I already have the Custom Dynamics rear saddlebag lights and was about to order the latch lights earlier but forgot. I'm now glad I forgot because I'll be ordering these instead.
They look good! I like how they wrap around.
thank you!
The lights look great. Maybe it's the trucker in me, but here's a suggestion.
I would have amber running lights and non-sequential turn signals on the sides and only red running lights with red sequential turn signals on the rear.
We will be working on all red lights soon, red brake and red turn...but im not sure we will be splitting them in 2 colors on the lights.
Awesome!!! It will make a great Valentines day gift!!
Yes it would!
Nice, I already have the Ciro 3d filler panel lights and latitude tail light. This would add some much needed light to the sides of the bags and a little more in the rear. A little more light is a good thing with people not watching for bikes like they should.
Yes sir...they are very nice and you are correct more LEDS is always a good thing.
From the video, the connection from the Saddlebags is under the seat. Does this mean you’re required to remove the seat every time you want to remove the Saddlebags? Or can the connection be just outside the saddlebag, like on the Custom Dynamics Turn Signals? I have the Sequential Custom Dynamics Turn Signals, but like these new Advanblack lights. 🏍💨🏍💨
They do plug in under the seat bro. Im not sure there is enough wire there to pull them out of each side.
I like them too but I will not get them because of having to remove the seat.
What lights are those on the fender tail. They make a great combo.
Damn, that's nice. I want some.
🔥 🔥
Those look awesome! When are they coming with red instead of amber?
We are working on them now...stay tuned!
Definitely going to have to start a go fund me for motorcycle accessories. Lol
haha! Im with you!
Will that work on a new Heritage that has hogworkz hardbags on them?
I like the lights but I love that rear fender and bags are that advanblack?
Yes..they will be out very soon!
I have smoked lens in all my rear lights and advanblack tourpack light. Will these match that smoked lens look or stand out as different?
I installed mine the brake light lights up yellow shouldn't it be red
I cannot find the plug on my 2023 CVO Street Glide. Is this compatible?
do you have these for a 2018 Heritage softail harness ? I have fitted hard saddlebags and would like to add these on.
no we dont im sorry
Is that an advanblack rear fender?
Looks good
Thank you!
Will these fit the '24 Road/Street Glides?? I can't seem to get any clarity on this.. Thank you..
yes they will...you will still need to run a side pipe as well.
@@Advanblack 'a side pipe'? It's unclear to me what that means. I'm in a Facebook group with about 5K other 23.5 CVO and '24 Glide riders and the general consensus is that they don't fit (wider bags).. We're waiting on a solution - so if you want to send me out some, I'll make a TH-cam showing them that they do in fact fit..
Custom Dynamics just released some low-profile rear lights, but I prefer the Hyper LED's because they wrap around.. and they look much cooler, admittedly..
Are they going to make them for earlier model street glide
We will be working on trying to convert them so they work on the older models but it may be awhile.
What are the lights on the filler panels for the fender
Those are the lights that come with the bagger boss kit
Great video. What fender and stretched bags are those?
Thank you Ty...Advan prototype bags and fender...hopefully coming soon.
@Advanblack Nice!!! That would be right on time!!! I'm currently in the process of looking for a set and if y'all do decide to produce, I will definitely buy!!! Keep dropping those videos. I've learned alot.
@@Advanblack any plans of 8" lowers similar to Voodoo or Dirty Bird
Need them bags . Please
@@Advanblack are those bags and fender coming to market any time soon? I've been hoping you guys or Hogworx would jump on that. These other companies are out of control with their prices.
Is there a contact number for Advanced Black for technical help?
What kind of saddlebags are those
Bagger Boss Rear End Kit coming from Advanblack very soon! Stay tuned!
can it be used on a 2012 road glide cvo?
Not at this time...the wiring will not be the same
Looks Bitchin ! They have tie wraps that are reusable. Undo them in event want to change things up elsewhere on bike. Sold on AMAZON CHEAP. Ride Safe
These lights are good looking but I think it sucks that you have to remove the seat in order to remove the saddle bags. This means that I will not buy these.
So you pretty much have to take your seat off and pull the wires every time you need to remove the bags? That’s pretty lame for a product selling for $260+
We upgraded the wire harness, you don't need to take off the seat off when you need to remove the bags
thanks for checking it out!