1) create vpc and subnet 2) create customer gateway 3) create virtual private gateway and attached to vpc 4) create route table and enable rout propagation . Also verify subnet association 5)and create vpc connection 6) download config for iOS router 7)make sure security group has vpn end point allowed inbound 8) verify remote end to vpc reachability 9) verify IKEv2 SA and IPSEC SA from router
1) create vpc and subnet
2) create customer gateway
3) create virtual private gateway and attached to vpc
4) create route table and enable rout propagation . Also verify subnet association
5)and create vpc connection
6) download config for iOS router
7)make sure security group has vpn end point allowed inbound
8) verify remote end to vpc reachability
9) verify IKEv2 SA and IPSEC SA from router
This is an excellent summary of the steps involved.
Well explained and useful video to everyone. Please do the same video using the Control tower using the 2 ISP interface.
Thanks for the feedback, appreciated! I will try!
What is the function of the IP inside in tunel 169.254.129.168/30..? Because it has to be configured in the router.
apipa is used in nowhere. so you can see this range on bgp loopback or router id address. Please use chatgpt to get more information.
Hello, do you have a tutorial using Transit gateway instead of Virtual Private gateway in a Control Tower setup
Not yet but I will be posting TGW soon!