วีดีโอ

Thanks for watching!

Not yet but I will be posting TGW soon!

Thank for question, 38400 or 115200 is the baud rate I recommend, Please make sure you have Tx and Rx connected as per the program or simply try swapping them. NEMA is for serial communication and should not tied to any specialized software.

@@SDNTechForum Thank you. I discovered that the problem was with a library that I was using to read the GPS signal. When I read directly from the serial port, the problem was solved. However, regarding the baud rate of 38400, I tried to change it, but it didn’t work and gave me an error.

My problem now is with the compass calibration. Any idea in how to make it acceptable?

You're welcome!

Here - th-cam.com/video/rvOgu5RCzPs/w-d-xo.htmlsi=w32mXFgByz6s0a9G

Thank you for the question, I am surprised that I am yet to post DNAC+TE integration. Let me post that urgently for you, check that and let me know if any questions.

@@SDNTechForum thank you very much. I appreciate that.

Please search "PISugar"

Welcome!

generally in this scenario you need to create a dedicated VLAN for the RP connection/ Configure your switch port as access in this vlan and physically connect this port to RP. The vlan does not need to be unique in your environment but it is better to not use it anywhere else.

Satellites act as a proxy and DNAC has a Satellite function built-in hence when you introduce DNAC you can retier satellite and let DNAC talk to CSSM and devices.

I am sorry to hear that, please write your question here and I ll try to answer them

the HTML will be specific to the content you want to display hence you need to write it yourself. There are many free tool that let you write HTML code with much know-how.

Yes they have macos and other operating systems, check the product page for confirmation

this is expected as secure servers require a certificate for client-to-server communication. Cisco devices have self-signed cert generated every time you bot up the device to facilitate web server requirements. The error you see, essentially tells you that very same behavior.

@@SDNTechForum I understand, but do you know what I need to do to be able to connect to my switch again please? Is there any manipulation or slight command?

@@olivier5490 please make sure you have crypto key generate on switch.

@@SDNTechForum Okay and is there any special manipulation to do? Sorry I'm new to this, I'm learning.😉

@@olivier5490 no problem, always happy to help. Please try this command- Switch(config)#crypto key generate rsa modulus 2048

this is a typical issue with upgrades, use the desktop app to upgrade and if required restore apps using seed.

@@SDNTechForum hey bro I really need help, I have old ledger nano s I haven’t touched in 4 years. I am afraid if I upgrade it i will lose my funds I lost my paraphrase words too.. it’s asking me to delete xrp wallet app before upgrading the firmware… could you please help me..

yes, CTB is integrated in DNAC now. From DNAC you can configure devices to send the flows to CTB and then create a rule in CTB to forward the flows to DNAC as destination.

My apologies it is certainly not the best audio here but you can increase the volume to follow.

For Cisco Catalyst 9800 Wireless LAN Controller (WLC) redundancy, there are different deployment models, but generally, both controllers should be on the same network or at least have network connectivity with each other. This is to ensure that they can communicate for redundancy protocols like Stateful Switchover (SSO) to work correctly. There are two main redundancy models for the Cisco Catalyst 9800 WLC: 1. SSO Redundancy: In this mode, there is an active WLC and a standby WLC. The standby controller continuously synchronizes data and state information with the active controller. Upon a failure of the active WLC, the standby WLC takes over without requiring re-authentication of clients and access points (APs). For SSO to work effectively, both controllers must have direct IP reachability, which typically means they are on the same subnet or network segment to minimize latency and ensure reliable communication. 2. N+1 Redundancy: This is a form of redundancy where 'N' number of WLCs are actively managing APs and clients, and there is one additional WLC acting as a backup for one or more controllers in the event of a failure. In N+1 redundancy, the backup WLC can be on a different network segment, but it should still have network connectivity to the managed APs to take control of them if the primary WLC fail

Did you get an answer please ? i have the same issue !

@@mayssaknani I just got the software thats out of date...

Any solutions

ip http server ip http authentication local ip http secure-server

You also need local username and password configured, that you will use to login to the WebUI

i think its possible to run

That is right it is not an AP but a simulated client.

You are very welcome.

Very much appreciate your feedback.

Thanks for the question. I assume you are upgrading using DNA Center. In that case, if there is any incompatibility for target release, it should not allow you to start the upgrade in first place. IMO, it is a bug, please work with Cisco TAC to get this fixed. Good Luck!

@@SDNTechForum At the moment I am not updating from DNAC, I have an HA 9800 LC, it seems strange to me that if I was able to update to version 17.3.8a MD, then I tried again to upload to 17.09.04a (ISSU Upgrade (HA Upgrade) but it always stays on the Part of Upgrade Active no longer goes to Switchover to Stand-by but is canceled. It will be time to open a case with the TAC. Thank you.