What Happens When You Put 600BHP In A Forklift?
ฝัง
- เผยแพร่เมื่อ 9 ส.ค. 2020
- Thank you for bringing this cursed vehicle to my attention
If you enjoy the video then please hit that like button!
Help support the channel over on my Patreon page - / jimmybroadbent
Most the music on this channel comes from the very talented Amphobious. Go check him out - amphobius.bandcamp.com/
F.A.Q. - pastebin.com/ha9pf9tK
Enter discount code "Broadbent" to get 10% off racing boots from - www.abruzzi.co.uk/
Sim Rig GT and Pro Pedals provided by Heusinkveld Engineering - heusinkveld.com/?v=79cba1185463
Momo C26s Racing Wheel - www.ascher-racing.com/
Handbrake V1.5 and SQ V1.5 shifter provided by Fanatec - www.fanatec.com/eu-en/product/pc
OSW MIGE available from SimRacingBay - www.simracingbay.com/
Footcam Sponsored by Frami Autosport. Go check out their facebook page! - / framiautosport
Twitch - / jimmy_broadbent
Business Enquiries - jimmy@coderedesports.com
Discord - / discord
Twitter - / jimmybroadbent
Facebook - / jimmerinobombino
Send me stuff! (if ya want)
Po Box 53
Unit 3
Burnt Barns Farm
Ninfield
TN339LZ - เกม
It makes a lot of downforce for a vehicle that generates lift.
Get out
Ha
aaand the dad of the year award goes to...
You sir, win comment of the year
Get the fork outta here!
As a forklift driver.. you might want to drive it in reverse.
Yeah I can't even imagine what that would be like. It would probably take about five seconds to totally destroy a warehouse and kill a few people lol
Can't load the truck in reverse
Beat me to it, but yeah is it rear steer that makes it undriveable
11:35
@@ValentineC137 well crap, that's what happens when you don't watch the video in full before commenting
Front wheel drive, rear wheel steer. The ascended version of the Longboi.
Longboi v2
Shortlongboi
Mustachio's Motovlogs liftboi
Should have driven backwards
Jimmy: "I don't think it weighs THAT much."
Me: Ummm, only about 3500 kg.
Depends on what ballast you got
@@dylanzrim1011 The one that I use at work is about 2000kg.
@Andy KA The counter balance needs to weigh more than the load, otherwise the forklift will Tip forwards.
As someone who works for a forklift company, probably more like 4000kg-4700kg
@@chriswardale4714 It probally lift's 2000kg, but weights more like 3.3t I'd guess
Why get a gtr when you can get a forklift
Next video idea: I sold my R35 for a 2JZ forklift!!
I mean, a used GTR and a new forklift cost about the same.
Imagine driving that through a warehouse.
Matt Gallagher be like:
Ooooohhhhh noooooo
Klaus would.
I read that in Scott's voice
@@samiraperi467 Klaus would be bringing The Apocalypse with this forklift.
Im just focused on how the wheel turns the opposite direction that the hands are steering.
Probably a bodge to get rear wheel steering working
David Pemberton my thoughts as well, but still 🧐
Didn't notice it before I saw your comment lol
Jimmy : " It doesn't corner particularly well "
What on Earth were you expecting Jimmer ?? XD
He was expecting to be a finalist for All-Commonwealth Understatement of the Year.
Forklifts can turn on a dime
At walking pace
Watches opening sequence: Wow Jimmy's starting to get more professional.
Watches rest of video: Naah!. Mad as ever. Great stuff!
When your downforce package is a pallet of bricks...
That’s what Norris meant when he said “That’s next year’s Ferrari” ?!?!
Lmao it’d honestly be faster
DylanRacer forklift could take those curbs better than Vettel that’s for sure.
@@dylanracer195 but handle are same
Dylan Zrim But Vettel got a worse car, probably 😂
Dr. Kostakious nah he’s just given up on the team
Me: trying to get better at AC to maybe not embarrass myself too much in the Ferrari Hublot series
Jimmer: Out here hotlapping Forklifts
this is exactly what I'm here for
In addition to the whole rear-wheel steering debacle, forklifts are also really heave (I think that one weights 2.5-3 tons depending on spec) and all of the weight is at the back as balast so they don't tip over. Looks like the modder did a pretty good job modeling the driving capabilities :). might be better with a 3 ton weight at the front to counter out the back :D Also some spoilers
As a professional forkift driver, I can confirm this is 100% accurate how it is inside and outside the warehouse
Jimmy tries to speak German
Germans: Diese Kommentarsektion ist hiermit Eigentum der Bundesrepublik Deutschland
his german is pretty good not gonna lie
and they are pretty good at what you described :)
Hahaha moin was geht😂
@@goomba0072 but he needs to learn the letter E right
Immer wieder schön andere Deutsche unter diesem angelsächsischem Bewegbilderzusammenschnitt zu finden
Only the most quality content on this channel
You're having a hard time sliding, because when a forklift slides you need to turn away from the skid not into it. When it sides the steering wheel are now pointing towards the inside, but if you give them even more angle there's a chance you can get them to catch and flick the truck back into line before the big spin.
I may download this and give it a shot. I would love to drive a forklift not governed to 6mph lol
Our forklifts could do 20kph thats 12in us metric. Once i allmost rolled it. When turned full lock at top speed. Well actuqly i flew out allmost. Belt saved my retarded ass
Lmao it’s faster than this years Ferrari
And without vettel driving the Ferrari would be faster
That isn’t much an achievement considering the life car could overtake the Ferrari
When you work a construction job but love going mega speed
You're welcome Jimmer :D
"The Toyota Tonero series includes seven forklifts with Diesel or LPG combustion engines. Their maximum
load capacity is up to 3.5 tons, the lifting height up to 7 m. With
diverse cabin variants for all weather conditions and
Toyota SAS, the Tonero is ideal for outdoors. The low noise and vibration,
the excellent all-round view and the simple maintenance make it
a comfortable, reliable all-rounder."
feels like one of those top gear episodes we all loved.. and thats only a good thing
Lando:Oh look that's a Mclaren
Jimmy I’m lovin the new intros. How your real life car stuff is mixed with your virtual car stuff and ends with your helmet. Absolute perfection!
The stock forklift sounds like the van in My Summer Car
petition for jimmy to drive the forklift in reverse, that way it's just a RWD forklift.
The forks just become a wheelie bar
11:35
Watching Jimmy's videos always "lifts" up my spirits
The wheel going opposite to the direction you were steering in was freaking me out
Having driven forklifts, the idea of a standard forklift doing 60mph scares the bejesus outta me!
Amazon box, the forklift, the lego car, and the dump truck. The ultimate multi-class racing
Multiclass idea jimmer: forklifts, lawnmowers, sheds and Amazon boxes
Tries driving backwards: “This is way better” - Jimmy Broadbent 2020
This is the content that elevates this channel to another level
Hell yeah jimmer great to see a new video and I love the new intro. Have a great week everyone. Love you Jimmy!
Lol this video is amazing, as always!
The wheel spin off the start tho 😂😂
now the holy trinity of the Thonk RV, Racing Lawnmower, and Sleeper Forklift can all race together
“It doesn’t corner well”
Were you expecting a fkn Mercedes? :p
That was a shocking revelation he made.
Small forklifts typically weigh 8,000-10,000lbs. They are far heavier than they look. Forklifts are typically rear-wheel steer, front-wheel drive, rear-engined and are not equipped with rear brakes. The far left pedal is not a clutch, but is called an inching pedal. It disconnects the engine from the transmission and applies brakes so that throttle can be applied to operate the hydraulics without moving the truck. Forklifts have at least two hand-operated levers but can sometimes have three. The far-left will raise the mast when pulled down and lower the mast when pushed up. The second lever will tilt the mast backward when pulled down and forward when pushed up. On forklifts equipped with a third lever on the far-right, the lever will shift the forks left when pulled down and right when pushed up. The fork width is usually set manually by leaving the operator seat, unlatching the forks at the mast and physically pushing them to the desired position before relatching them and pushing them in to lock. Forklifts are extremely prone to tipping in sudden turns, especially when heavily loaded and/or travelling too fast. Most only have a single-speed transmission, but some can have more. The front axle is almost always bolted directly to the frame with no suspension whatsoever.
All Jimmy fans when they see him put 600hp in a forklift: Interesting
I’d like to see more BeamNG Drive.
There’re a lot of mods with ridiculous confiqs.
There’s a mod a with a rocket powered minivan, it also has a ramplow
Jimmy: 'I feel every bump in the road'
Me: 'that's because the have no suspension. The wheels are practically hard mounted'
Jimmy Broadbent. The only man who managed to crash a FORKLIFT on the Nordschleife (edit: several times). No clickbait whatsoever
That was the funniest thing I've seen in a while. Thanks Jimmy.
I spun a forklift once working for K-Mart. Unbeknownst to us someone did an oil change in our parking lot. I was driving around moving pallets of wood chips and as I came around a corner I hit a massive puddle of oil the dude left. The forklift did quite a graceful slow motion pirouette. Scared me senseless but luckily the forks were lowered and I didn't have a load so it didn't topple over. We found the remnants of the oil quart containers thrown into the bushes.
"What happens when you put 600hp in a forklift?"
You get another super serious lap of the nordschleiffe!
The new intro is awesome
Had tears in my eyes while watching!!! Big thank you for this awesome video :D Next task would be a full drift lap in our vacuum cleaner 'henry' ;P
In business news today Amazon has announced that they will be retrofitting all forklifts in their fleet with single turbo 1JZ engines. An Amazon spokesperson stated that the initiative fits into the company’s new strategic objective to “Just fully send it”
Jimmer, the intro looks amazing. Your video and mum's hot soup are what's about to get me through this virus i can feel it, thank you brittish boi
See this is why I love jimmy broadbent
Toyota's site doesn't even mention the brake specs xD but it's at least hydraulic.
The was funny man especially near the end when it sank into the mac....more of that plz jimmer
Your lap was invalidated because your forks don’t have a hitbox!
Seriously, that was good fun to watch... I’m a forklift operator and this made my day. lol
Jimmy thats as funny as hell m8.
Made my day laugh so hard nearly felk off my chair
i need a racing series of this now
Part of my job is driving forklifts/tele handlers. most forklifts are rear wheel steering and front wheel drive.
Until you get into stuff like telehandlers and specialized equipment that can have 4 wheel steer and all wheel drive. some off road larger forklifts even have a stick shift shifter with hydrostatic transmissions.
Forklifts are extremely heavy with most of the weight at the rear to prevent them falling over when moving heavy stuff (that little fella weighs 1500kg which is fairly realistic), they're also often powered by propane so you can drive them indoors without smoking the place out
I pinged you these on insta, has made my day watching that. Also brought back some memories of driving one with the rear wheels bobbing up and down as I had to heavy a load too far out on extended length forks 😆
Can't get enough of the new Intro. good vibes
Sleep paralysis but it’s you running from your demons in a 600hp forklift that’s virtually uncontrollable
This is the content I subscribed for right here
"Hey guys, and you thought Jim Clark drove the fastest ever forklift boi here..."
Complete with masterful use of the German language as well. A true renaissance man there.
Great job on the new intro Jimmer!
love the video. you whount see a fork lift driving on a track. only on this channel. cool as man
you know jimmy, you could do a commentary for a race in assetto corsa where AI drive the forklift and other stupid mods and see how they handle the "cars" :D
Shed racing would be my favorite
Stting here slamming refresh trying to find something to watch, then Jimmer comes through with this video. Yes, yes this will be the video that lifts the late afternoon melaise.
Lando Norris: lol his driving the 2021 ferrari 😂🥛
As a German Guy i appreciate your Try at reading the Technical Data of the of the Forklift. Wirklich gut gemacht. 👍 And What the Hell was that a ride.
5:12 POV: you walk past your neighbours gremlin of a chihuahua
Absolutely love the drop in of Lando ripping into the Ferrari’s and Sainz 🤣
I'll be hotlapping around the warehouse next week thanks to this video
I love the new (sort of) intro!
my dad who recently passed away used to sell forklifts. I wish I could have shown him this or even let him drive that mad thing on my own rig. He would have had so much fun
But with this 600 hp toyota you could actually pick up girls 👍
Sorry
Lol
Yeah, just "give 'em a lift, ey?
There's a yo momma joke in there somewhere too, I'm sure of it.
@@Vanta_Blue Nah, it's a powerful forklift for sure, but it's not THAT powerful
Jimmy: ok, nice and easy
*instantly hammers the throttle pedal*
That intro is absolutely awesome.
At about 6:30 when it comes skidding around the corner is the best bit in the video.
I swear your entire channel is the Nurburgring. I love it
Nice drifting jimmy.😃👍
Front wheel drive + rear wheel steer = reversing lap of the Nordschleife
You should see the forklift I used to drive years ago when I worked at a lumber yard, had 37 1/2" tires on the front and a 4 speed h pattern gearbox and was road legal (it was made to tow behind a 10 wheel truck) thing was literal tons of fun
Map your steering opposites, clutch to throttle and throttle to clutch. Completely cursed setup!!
I'm in love with this new intro
Jimmy: I’m stopping the Nordschleife hot laps.
Also Jimmy: Today I’m going to take a shopping trolley with 1000bhp and a jet engine around the Nordschleife.
Your intro is awesome, I love it
R31 had the rb30det, in turbo anyway. 3L v6 turbo.
Was used in a very popular Aussie turbo car from 30 years ago when Nissan and Holden had an agreement to share engine/body design back then on some projects.
I drive a forklift at work.
This might be my favourite video on the channel
Also, make sure you keep your cog within the saftey triangle🙂
Oval racing multi class with these, the mowers and the large boi campers 🤣
This makes me smile!
her: come over
me: i can't, i'm working at the warehouse today on the lift.
her: i'm home alone
me: *600bhp forklift intensifies*
Forklift drifting video seems like a great idea
Someone needs to make a stretched frame version of this, widen the track a bit, upgrade the brakes and tires, and give it full aero. Lol
Two words: Superscribers. Race.
Technically if you put the fork lift thing at the front up, and you go backwards, you would make insane amounts of downforce.
the new intro is like the best intro on youtube
Great content 👍
Good video jimmy.😃👍
I'm so glad you didn't retire these ring vids 🤣
Every Jimmy Broadbent video:
"we take *insert stupid vehicle here* and give it a TURBO!"
that's possibly your best intro yet
I love the build up to 4th gear 😂
im impressed someone figured out rear wheel steer in AC lol. i wonder if the entire car is just backwards...