Awesome! I've been thinking about doing a vid kinda like i did for my 230 but with the lt250r's. Picked up an 87 disassembled bike last year. I wanna start putting it together, also piecing together another first gen!
The 88-92 LT250r cylinder has the best power potential. Have your top end ported and the head done. The '87 LT250r cylinder will need more work to get the same power/response.
I just saw these comments...cylinderwise, you're kinda limited, but could have it ported. Duncan, ct racing and several others still work on these bikes. As far as my suspension goes, stock all the way around on all my bikes. Thanks for watching.
Papou Derival could be a few things...check all your connections, and make sure you're grounded. If you're good there i would pull the stator cover and check the pickup (I had one where the crank seal blew out and dissolved the glue on the pickup and I had to put a new one on) I also had the screws come lose on the stator causing it to lose time, check those. Might try a new coil...worst worst case would be the CDI..but try simple first. I am trying to figure out why I don't have hot spark on my 230 currently, so I feel your pain. Good luck!!
Doing research on a 1992 lt250r I bought. Gona be a project for my wife. Thanks! Everything I was looking for
Awesome! I've been thinking about doing a vid kinda like i did for my 230 but with the lt250r's. Picked up an 87 disassembled bike last year. I wanna start putting it together, also piecing together another first gen!
Very cool.
Thank you!
Hello, do you have a complete ignition system for sale?
Anyone have a clutch basket for an 1987 lt250r?
Ebay is yo fran ;)
I have a 1990 lt250r which cylinder can I put on mine to make it faster
The 88-92 LT250r cylinder has the best power potential. Have your top end ported and the head done. The '87 LT250r cylinder will need more work to get the same power/response.
Hi mate , will the 86 engine fit into an 84 frame
Hey what’s your front a arms and hub setup and your rear axle and hub setup on your bike
I just saw these comments...cylinderwise, you're kinda limited, but could have it ported. Duncan, ct racing and several others still work on these bikes. As far as my suspension goes, stock all the way around on all my bikes. Thanks for watching.
What if my lt250r doesn’t spark up
Papou Derival could be a few things...check all your connections, and make sure you're grounded. If you're good there i would pull the stator cover and check the pickup (I had one where the crank seal blew out and dissolved the glue on the pickup and I had to put a new one on) I also had the screws come lose on the stator causing it to lose time, check those. Might try a new coil...worst worst case would be the CDI..but try simple first. I am trying to figure out why I don't have hot spark on my 230 currently, so I feel your pain. Good luck!!