In our condition When we give ON command through BMS system to VFD,it is operating but when power off in VFD after power coming to VFD,it will not start again. On/off command is through modbus
Hi my Dear Teacher Many Thanks for your explanation Let me ask you some question I have a Cookies Machine after i did the setting and pushed the buttom OK The Motor does not round at all it sounds only with out rounding so please reply for me as quick as possible thanks.
You have two options 1. Through input 1 and 2 multiple speed option. 2. Use two variable pots with adding SPDT button in series with pots output. Then use first pot to set 25hz. and another one for 50 hz..
At 1:40 secs How we are setted that at 72hz stage the rated rpm how much and the name plate will be how much so drive setting only india frequency is 50 hz more then not setted how is it possible please reply
This is the beuty of ac drives. where you have a facility of Changing frequency below and above normal speed. and ultimately the speed of the motor.. you can always increase the Speed of the motor above normal speed as long as bearings are capable to handle that speed.
The speed doesn't come below 30hz when using potentiometer
Thankអរគុណ🙏🇰🇭
Hindi spik sar
Hello, the potentiometer isn't changing the motor speed.. output is stuck at 11.5 Hz, any advice please?
In our condition
When we give ON command through BMS system to VFD,it is operating but when power off in VFD after power coming to VFD,it will not start again.
On/off command is through modbus
ALM8, w8 is showing in display what's the problem
Can you make a video for one by one connection of motor and drive connection and upload please
Hi my Dear Teacher Many Thanks for your explanation
Let me ask you some question I have a Cookies Machine after i did the setting and pushed the buttom OK
The Motor does not round at all it sounds only with out rounding so please reply for me as quick as possible thanks.
por que retorna 130vol por el gnd?
So is it setting 1-23 or 6-15 to set max speed? but thanks good video .
motor run so fast how can i control the speed of motor.
Sir you have not explained speed change with drive pot
If you are trying to run your el. motor over the default 50Hz with external pot, try settings 3-03 set to your desired max freq. and 6-15 aswell.
Also par. 4-14 has to be set to your max. freq
Sir ,Please explain how to use a Danfoss 3 phase Micro Drive on 230 V single phase . Kindly Guide
Sir, connect single phase supply in (L1) L and N (L2). put motor voltage, max current, hp in OM 1 settings. thats it.
Nice
Anel
Thank you so much!!!!!!!! :))))
In auto mode
How to set the drive to run at 2 fixed preset speeds ? i want to run the motor at 25 Hz and 50 Hz as required by two
buttons
You have two options
1. Through input 1 and 2 multiple speed option.
2. Use two variable pots with adding SPDT button in series with pots output. Then use first pot to set 25hz. and another one for 50 hz..
At 1:40 secs How we are setted that at 72hz stage the rated rpm how much and the name plate will be how much so drive setting only india frequency is 50 hz more then not setted how is it possible please reply
This is the beuty of ac drives. where you have a facility of Changing frequency below and above normal speed. and ultimately the speed of the motor.. you can always increase the Speed of the motor above normal speed as long as bearings are capable to handle that speed.