Sehr schön und detailliert erklärt wie man eine Wasserpumpe Instandsetzen sollte. Mittlerweile wird ja überwiegend nur noch durch meist qualitativ schlechte Bauteile ersetzt und die alten Qualitativ hochwertigen Komponenten landen im Schrott. Danke Dir, beste Grüße aus Deutschland in die Staaten 👋 🇩🇪
I hate replacing, I wish rebuilding was way more common nowadays even if more expensive if companies did this it would be cool and way sought after even if more expensive than replacing so customers get oem quality like brand new again
Man, it is great to know how to do this. My water pump on my car just went bad. It costs about 189.00 dlls. This could definitely save me some money. Thank You very much for this video.
Thanks a lot - a really helpful video and very well done. I am just rebuilding my tractor water pump and your video is perfectly on target!! George Rutherford in New Zealand
thanks for your patience many countries of south, america do not manufacture spare parts for vehicles, so we have to repair, thank you for your videos ..
If the impeller or pulley flange of your pump has pulling holes, best plan is to pull them first. Sometimes there’s something hidden behind the pulley that’s important to know before you break the housing! Most water pump housings aren’t all that strong. when you get to pressing and the impeller is stuck, you can crack the housing. Sometimes you have to do it that way, but it’s best to pull impeller if there’s a provision to do it.
Thank you for a good video that explains how to actually rebuild a water pump. Many other YT videos are fluffed with nonsense about what a pump is or how coolant works. :)
Great video! I work on lots of old obsolete stuff. Usually the housing and impellor is fine and all I need to do is replace the bearings and seal. Who is a good supllier of bearings and seals? I'd like to order by dimentions if possible
I have your video series and they are great. You do the best job I have seen in explaining what you are doing that I have seen. If you would really get into various repairs on different makes of tractors you would have a tremendous following.
This is a great vid, but your particular seal style does not contact the impeller shaft as you indicate with a clearance fit, however there are ones that are an interference fit on the shaft and need to be pressed on. The pressed bushing of the seal will turn with the shaft in that design. You should have mentioned the press fit design as well in the video to avoid confusion to the assembler when they go to "slip" the seal over the shaft and it interferes.
Not all bearings get pressed out the pulley side. I did it your way, inside to outside, and the Impeller broke. The pump is an F2244R. On this one, once the pulley is removed, and the hairpin keeper removed, I press the bearing to the inside, and then block the impeller and press the shaft out.
I have a John Deere 1050 tractor it overheated. It was the first time it is overheated that I know of. I just checked the thermostat and it opened in boiling water. So here's my question. It has a direct fan yamar three cylinder Diesel engine. If I spin the fan fast enough with the top radiator hose off (and the thermostat out) would I be able to identify if the pump is working by the water sucking or shooting out of the top?
Cool video, really informative. i think people should overhaul water pumps more often. what would you commend I use to remove a pulley hub for a spin on clutch.
my car has a special water pump that costs over 400$ I found the same pump but not the same cast, the internals are identical, can I simply press the 68$ rebuilt pump's internals out & install them in my old pump?
Nice info I'm mechanic auto Can u change water pump move not from crankshaft but into turbines using turbocharger it will increase enggine power also reduce enggine baggages.. and oil pump also Re.. Andy
I do not order by dimension so I don't have supplier. OEM suppliers many times have kits or aftermarket kits are sometimes available. tiredirontractorparts . com
but you started after the pulley was of and skipped over pressing the shaft out of the impeller those are the are the things people need help with without it the video is worthless.
Sehr schön und detailliert erklärt wie man eine Wasserpumpe Instandsetzen sollte. Mittlerweile wird ja überwiegend nur noch durch meist qualitativ schlechte Bauteile ersetzt und die alten Qualitativ hochwertigen Komponenten landen im Schrott. Danke Dir, beste Grüße aus Deutschland in die Staaten 👋 🇩🇪
so refreshing to see old school repair rather then just replace
I hate replacing, I wish rebuilding was way more common nowadays even if more expensive if companies did this it would be cool and way sought after even if more expensive than replacing so customers get oem quality like brand new again
One of the best instruction videos I have seen.
Man, it is great to know how to do this. My water pump on my car just went bad. It costs about 189.00 dlls. This could definitely save me some money. Thank You very much for this video.
Awesome video Brother! About to do this on my 96 Chevy K1500..Been 12 years since this video,I hope all is well!
Thanks a lot - a really helpful video and very well done. I am just rebuilding my tractor water pump and your video is perfectly on target!! George Rutherford in New Zealand
thanks for your patience many countries of south, america do not manufacture spare parts for vehicles, so we have to repair, thank you for your videos ..
Thank you, really appreciate you taking time to make this video. Feel better knowing how it is supposed to come off and go back to gather.
If the impeller or pulley flange of your pump has pulling holes, best plan is to pull them first. Sometimes there’s something hidden behind the pulley that’s important to know before you break the housing!
Most water pump housings aren’t all that strong. when you get to pressing and the impeller is stuck, you can crack the housing. Sometimes you have to do it that way, but it’s best to pull impeller if there’s a provision to do it.
First class video a man that really knows his job
Thank you for a good video that explains how to actually rebuild a water pump. Many other YT videos are fluffed with nonsense about what a pump is or how coolant works. :)
Man. I gotta rebuild my water pump on my excavator John Deere. Sure glad I found this. Thanks.
Great video! I work on lots of old obsolete stuff. Usually the housing and impellor is fine and all I need to do is replace the bearings and seal.
Who is a good supllier of bearings and seals? I'd like to order by dimentions if possible
I have your video series and they are great. You do the best job I have seen in explaining what you are doing that I have seen. If you would really get into various repairs on different makes of tractors you would have a tremendous following.
This is a great vid, but your particular seal style does not contact the impeller shaft as you indicate with a clearance fit, however there are ones that are an interference fit on the shaft and need to be pressed on. The pressed bushing of the seal will turn with the shaft in that design. You should have mentioned the press fit design as well in the video to avoid confusion to the assembler when they go to "slip" the seal over the shaft and it interferes.
Thanks for the info. I knew all that. I just need to know how to get the pulley off without breaking it.
Great Job on this video, as you do on all of your videos !
Is there also a video of the remove/reinstallation of this part?
Video Good video. I enjoyed watching the process. Thank you
Great video, thx
My pump shaft broke. What's the best way to get the outer race out?
Not all bearings get pressed out the pulley side. I did it your way, inside to outside, and the Impeller broke. The pump is an F2244R. On this one, once the pulley is removed, and the hairpin keeper removed, I press the bearing to the inside, and then block the impeller and press the shaft out.
I missed out on the gasket installation and rebolting
How about showing the pulley removal? that IS part of the process!
Great video and thanks for taking the time & sharing.
Can you tell me what this sealant is that you are using on the seal. And also who makes the sealant.
The Right Stuff by permatex
what is the type of sealant you used for the seal ? who makes it and what is it ? thanks
That is the Permatex Aviation 3D sealer
What's a good online source for kits (bearing and seals) for auto water pumps?
Where to find bearing and seli kit for waterpump mopar 383, 1967?
Just wondering how you got the pulley off of the shift? Mine is frozen on pretty solid, might have to get the torch out on this one
With a bar type puller.
My Mercedes’ pulley is sticking out 1/4 inch. Can I just smack it back In?
I have a John Deere 1050 tractor it overheated. It was the first time it is overheated that I know of. I just checked the thermostat and it opened in boiling water. So here's my question. It has a direct fan yamar three cylinder Diesel engine. If I spin the fan fast enough with the top radiator hose off (and the thermostat out) would I be able to identify if the pump is working by the water sucking or shooting out of the top?
Cool video, really informative. i think people should overhaul water pumps more often.
what would you commend I use to remove a pulley hub for a spin on clutch.
my car has a special water pump that costs over 400$ I found the same pump but not the same cast, the internals are identical, can I simply press the 68$ rebuilt pump's internals out & install them in my old pump?
Great information. Is that a JD RE41897 excavator water pump?
thank you great video awesome explanation thank you
Nice job. Where can I order seals for my water pump (2004 chevy silverado, 6.0 L. gas engine)?
Thank you, sir! You have helped us immensely!
Nice info I'm mechanic auto
Can u change water pump move not from crankshaft but into turbines using turbocharger it will increase enggine power also reduce enggine baggages.. and oil pump also
Re.. Andy
Great video. Should help me in rebuilding a Chevrolet truck pump.
Good Video ,thanks
im gonna be doing this job next weekend does anyone know if you have to pull radiator or can waterpump be removed with radiator still in place thanks
I have an old 5020, & I didn't have to pull the rad. Its tight, but was able to get it out without damaging the rad.
Thank you for the video👍🏽
Nice work there
Found this video after I rebuilt my JD pump. I did not put any sealant on the seal housing, now I am worried. I hope it still works........blah.
You must be a fellow Pennsylvanian...I heard a "warsher" in there.
this guy is good...
Very informative vid. Thanks!
Wrist pin off of what?? lol Nice video
wow, i actually learned something on youtube!
Great video
great video, thanks
The was all pump and no pulley. I want my money back.
I do not order by dimension so I don't have supplier. OEM suppliers many times have kits or aftermarket kits are sometimes available. tiredirontractorparts . com
waw that was a good info
but you started after the pulley was of and skipped over pressing the shaft out of the impeller those are the are the things people need help with without it the video is worthless.