Magic video, it shows what you're doing really well. It looks like whoever took apart the MKII I have my hands on currently didn't put half the bolts back in. The two at the bottom of the wing next to the door are missing, as are a few of the torx that hold (ish in my case) the wheel liner on. Grrr...
Appreciate the walk through front wing removal, mine has gone rusty in the same place! Just picked up a new one for £48 inc VAT not bad considering my local breakers wanted £40 for a used one just as bad as mine! It's a bit of a faff to remove, way too many bolts, probably needed 3 or 4 at the most. I'll paint mine off the car, just a cheapo rattle can job, paint to match was £10.99 from halfords. One tip - I paint the bottom section by the sill and up to around the bottom of the door openings in a tough protective stone chip finish over the paint, just helps to prevent future corrosion in this vulnerable area where stones get thrown up by the front wheel and chip the paint.
@@leefal From Ford Dismantlers, Bleachers Yard, New Basford Nottingham. They have a good selection of good used parts plus they sell many new parts like wings etc I couldn't find them cheaper anywhere else including ebay! Fit was spot on, everything lined up, the only issue I had was the 2 bolts at the very bottom were rusted solid, so I had to drill one out and just put another nut washer and bolt through, I didn't bother taking the other out the wing was so badly corroded there it came off anyway. Make sure you give the underside of the wing a good coating in primer etc I gave mine 2 coats and extra stone chip at the bottom. I also gave the front of the sill where it's behind the bottom of the wing a good wire brush and a few coats of a zinc based anti rust primer, because it's a vulnerable point where road dirt, leaves, mud and debris collects.
Hi great video'I had to replace the front wing on my 2006 ford focus,as the bottom was rusty a common people,as there is a piece of fome behind the wing with hold's water and rots out the bottom of the wing Keep up the great work, really injoy your videos
Another great video as always Alan, that is a whole bunch of work to remove a front wing!! Cerianly not as simple as a MK1 that's for sure... it still comes with the obligatory rust and filler at the bottom :)
Tippical yank driver, I know thats what you wanted to say. LOL I love the british hummor. well at lest what we used to see here in the U.S. "Are You Being Served", Benny Hill", and "As Time Goes By" . Just checking the Focus front before repairing my Grandaughters fender bender. Thanks for the show. God bless.
I can tell you Alan that a proper ball joint splitting tool does fit in that tight space unfortunately. I also had to cut the allen key to stop ball joint fro spinning, as once the nut on ball joint is getting tightened there was not enough space for allen key anymore 🙈 Bloody annoying if you ask me! I normally split ball joint from taper by hammering the suspension arm but I will use your handy tips next time 😉👍 BTW Nice touch with that piano music at the end 👍
I had a 2007 Focus CC and had to have both wings replaced due to rust. Apparently a set of mud flaps makes a big difference to the longevity of the wings
I'm surprised you didn't have the edges and inside painted on the wing firs Alan before you fitted it?? It just makes it harder for the painter as he's going to have to do it! Just a thought bud! 🤔
Usually a hit to the front wing results in the car being pushed when the friction of the mainly front tyres on the road is exceeded so the impact is going to last over a greater period of time the wings going to help absorb the shock too
The main issue with wrong hand drivers is LH drive where the are hit from the Right due to looking the "wrong way". I had a drunk German walk into me on a motorcyle on Douglas prom due to him looking the wrong way, hit me on the front brake lever and sent me "over the top" :(
It’s actually 14c which is rare for us at this time of year. Good news is we are expecting -5c by b by Weds! I don’t care I’ll be in Normandy next week for work 😎
@@chucky2316 not complaining as it should only be about 7/8c here at the moment. Thanks for the good wishes for my trip. Might even post a video about it on my TH-cam channel.
Alan Alan Alan the mechanic who can, 😂1990s Starion loving Talon caring Falconer of a former life…. That Focus some poor previous repair. At least the wire brush cleaned the area. Love the videos. Wish I was half capable on the tools.
I have - Mk5 Golfs are dreadful for rusty wings and sills - and it depends on your definition of modern too, this Focus is nearly 15 years old now. Same age late E46 3 series BMWs are now suffering from quite miserable tinworm underneath as well.
Hi Alan , I’m reaching out to see if you or any of your followers have had a problem like I’m having on a mk4 mondeo 2ltr diesel, right here goes as I know you’ve messed around with plenty of these hope in you may have come across this problem , first time this happened I was doing 70mph m6 fast lane engine cut out managed to get across lanes to a safe area luckily, got recovered back home left over night starts an runs perfect but now occasionally breaking down, if I short positive lead to earth I can get it going again this as gone on for about 18 months now , until now it’s to unreliable to use , so now I’ve had 3 auto electricians look at it they say ecu pcm all of which have been sent away an tested all ok , so still got a problem if I disconnect the connector of the throttle control body it runs an drives ok just under powered as soon as I but it back on eng cuts straight away as valve closes off cutting air flow , so far I’ve changed ecu pcm instrument cluster accelerator pedal EGR valve checked out all of the fuse box stripped back wiring loom from ecm , now just don’t know what to check next also fault codes was pointing towards pcm fault, here’s hoping you may point me in a right direction, sorry it’s so long 👍
standy rusty wing on a focus, all the same, lucky very light damage, i use old style spring compressors to get it out of the hub on some fords, makes a change for the pinch bolt to come out well, amount ive had to heat up and the head is rusted to **** lol
you get what you pay for..if you want a new car go hire one, these cost £100 per week which seems to suit the yanks and no, they are not bodged up so watch your slander
Great video but I would say its probably not worth the cost for that car. I suppose as it a rental you don't include your time and I guess you have a deal with the body shop too otherwise I think that repair would probably cost nearly 3 grand.
If only the US drove on the left. Pity they left the British Empire so early. Great video. Your boss is running bangers. My 2005 Mondy is better than that! Was that car worth mending? Most people would have scrapped it.
ahh, a proper car at last, mines a '10 1.8tdci titanium estate there's enough space to get 2 old style spring compressors up the strut tower, + compress the spring enough to get the strut out i can't keep my driveshafts in, bolts come loose once a year, loctite or not phone 999, someone's nicked your safety chains...
Lo again, Nice long xmas/new year break eh. Moni. lookn cool all things ok in the world again. Right ,noted the car is an 07 the cost of that repair would make it a breaker up here [Ecosse}. Thanks for the instruction vid. Later.
Magic video, it shows what you're doing really well. It looks like whoever took apart the MKII I have my hands on currently didn't put half the bolts back in. The two at the bottom of the wing next to the door are missing, as are a few of the torx that hold (ish in my case) the wheel liner on. Grrr...
Appreciate the walk through front wing removal, mine has gone rusty in the same place!
Just picked up a new one for £48 inc VAT not bad considering my local breakers wanted £40 for a used one just as bad as mine!
It's a bit of a faff to remove, way too many bolts, probably needed 3 or 4 at the most.
I'll paint mine off the car, just a cheapo rattle can job, paint to match was £10.99 from halfords.
One tip - I paint the bottom section by the sill and up to around the bottom of the door openings in a tough protective stone chip finish over the paint, just helps to prevent future corrosion in this vulnerable area where stones get thrown up by the front wheel and chip the paint.
Can i ask where you got your wing panel? Mines are rusting to shit as well.👍
@@leefal From Ford Dismantlers, Bleachers Yard, New Basford Nottingham.
They have a good selection of good used parts plus they sell many new parts like wings etc I couldn't find them cheaper anywhere else including ebay!
Fit was spot on, everything lined up, the only issue I had was the 2 bolts at the very bottom were rusted solid, so I had to drill one out and just put another nut washer and bolt through, I didn't bother taking the other out the wing was so badly corroded there it came off anyway.
Make sure you give the underside of the wing a good coating in primer etc I gave mine 2 coats and extra stone chip at the bottom.
I also gave the front of the sill where it's behind the bottom of the wing a good wire brush and a few coats of a zinc based anti rust primer, because it's a vulnerable point where road dirt, leaves, mud and debris collects.
Hi great video'I had to replace the front wing on my 2006 ford focus,as the bottom was rusty a common people,as there is a piece of fome behind the wing with hold's water and rots out the bottom of the wing
Keep up the great work, really injoy your videos
Great work as always Alan,loved the tape and filler repair job 😂😂
Yes nice tuck & roll Alan ; I find that being slightly bonkers at work gets me thru the day too.
Strange how some cars rot like that & others don`t .
TANKIOU❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
cheers😊
I Realy do enjoy Your british sens of humor! There is a thing I do not like - wait to long to see a new video! :) Best regards from Estonia!
Your painters gonna curse you, silicones and body shops don’t mix.
your paint mans gonna love you spraying silicon near that wing Alan! 😆
Another great video as always Alan, that is a whole bunch of work to remove a front wing!! Cerianly not as simple as a MK1 that's for sure... it still comes with the obligatory rust and filler at the bottom :)
Brilliant Video many thanks, Sandy
Tippical yank driver, I know thats what you wanted to say. LOL I love the british hummor. well at lest what we used to see here in the U.S. "Are You Being Served", Benny Hill", and "As Time Goes By" . Just checking the Focus front before repairing my Grandaughters fender bender. Thanks for the show. God bless.
I can tell you Alan that a proper ball joint splitting tool does fit in that tight space unfortunately. I also had to cut the allen key to stop ball joint fro spinning, as once the nut on ball joint is getting tightened there was not enough space for allen key anymore 🙈 Bloody annoying if you ask me! I normally split ball joint from taper by hammering the suspension arm but I will use your handy tips next time 😉👍
BTW Nice touch with that piano music at the end 👍
Great job Alan, like new again👌👍😎
love the crash repair videos the most
One of the best videos.👍
Alan the mark notch on the shock is that relevant in all cars
Had to sort the wing out on my daughters Mk1 Toyota Aygo. A hell of a lot simpler than what you went through!
I had a 2007 Focus CC and had to have both wings replaced due to rust. Apparently a set of mud flaps makes a big difference to the longevity of the wings
Glad to see you on good shape
Comment! shouldn't a front wheel drive car have a little toe out so it corrects itself when pulling?
I'm surprised you didn't have the edges and inside painted on the wing firs Alan before you fitted it?? It just makes it harder for the painter as he's going to have to do it! Just a thought bud! 🤔
Pattern body panels have come on a long way. They line up properly nowadays.
Hi Alan, could you make a video from a ford focus st mk2 and say your opinion on it? Greetings from Finland.
Think my insurer would have written it off, would be interesting to know total cost of repair.
Usually a hit to the front wing results in the car being pushed when the friction of the mainly front tyres on the road is exceeded so the impact is going to last over a greater period of time the wings going to help absorb the shock too
The main issue with wrong hand drivers is LH drive where the are hit from the Right due to looking the "wrong way". I had a drunk German walk into me on a motorcyle on Douglas prom due to him looking the wrong way, hit me on the front brake lever and sent me "over the top" :(
Yes what a smashing video.
I remember my brother fitting new wings and a valance on a metro we had to panel beat them to fit lol
Evening Alan from a very wet Germany
You have rain over there I feel youre pain, usually rains in Britain but we are dry makes a change 😂
It’s actually 14c which is rare for us at this time of year. Good news is we are expecting -5c by b by Weds! I don’t care I’ll be in Normandy next week for work 😎
@@mercedes_and_more it's about 12 degrees in South West England and dry we have had our fair share of rain. Have s good trip to France german friend
@@chucky2316 not complaining as it should only be about 7/8c here at the moment. Thanks for the good wishes for my trip. Might even post a video about it on my TH-cam channel.
Alan Alan Alan the mechanic who can, 😂1990s Starion loving Talon caring Falconer of a former life…. That Focus some poor previous repair. At least the wire brush cleaned the area. Love the videos. Wish I was half capable on the tools.
even the top part of the strut need to be align with the bottom one ??
Alan. You are your across
The pond UK living mates. They keeping pulling out looking the wrong way.
Excel ant viewing thanks allan
did you change the cv joint you mackled up
сколько стоит окрас детали с материалом у вас?
I have question how to remove Blend door actuator in steering side mondeo mk4 2009
Great vid.
My tight whip's got camber, mush! 😂😂
Done dampers on Fiestas ,never taken the lower ball joint out of the hub.
Naughty,naughty with the filler. No treating the rust prior to install?
Never seen a modern car rust as much as the Ford focus
I have - Mk5 Golfs are dreadful for rusty wings and sills - and it depends on your definition of modern too, this Focus is nearly 15 years old now. Same age late E46 3 series BMWs are now suffering from quite miserable tinworm underneath as well.
I've seen a focus at 4 years old sill and back arch and wings rusting right through from the back must have no rust proction
Are you now permanently based at the car sales site?
Hi Alan , I’m reaching out to see if you or any of your followers have had a problem like I’m having on a mk4 mondeo 2ltr diesel, right here goes as I know you’ve messed around with plenty of these hope in you may have come across this problem , first time this happened I was doing 70mph m6 fast lane engine cut out managed to get across lanes to a safe area luckily, got recovered back home left over night starts an runs perfect but now occasionally breaking down, if I short positive lead to earth I can get it going again this as gone on for about 18 months now , until now it’s to unreliable to use , so now I’ve had 3 auto electricians look at it they say ecu pcm all of which have been sent away an tested all ok , so still got a problem if I disconnect the connector of the throttle control body it runs an drives ok just under powered as soon as I but it back on eng cuts straight away as valve closes off cutting air flow , so far I’ve changed ecu pcm instrument cluster accelerator pedal EGR valve checked out all of the fuse box stripped back wiring loom from ecm , now just don’t know what to check next also fault codes was pointing towards pcm fault, here’s hoping you may point me in a right direction, sorry it’s so long 👍
standy rusty wing on a focus, all the same, lucky very light damage, i use old style spring compressors to get it out of the hub on some fords, makes a change for the pinch bolt to come out well, amount ive had to heat up and the head is rusted to **** lol
Like your videos but rental cars in that state, what other bodged jobs have been done on those "rental" cars😮
you get what you pay for..if you want a new car go hire one, these cost £100 per week which seems to suit the yanks and no, they are not bodged up so watch your slander
@@alan4x you literally laughed at the "botched" bodywork job implying that it wasn't okay? & by the way slander is spoken libel is written!
Yeah so with an accident on that side open the door gently at first to check there is nothing restricting it so you don't accelerate repair costs.
Great video but I would say its probably not worth the cost for that car. I suppose as it a rental you don't include your time and I guess you have a deal with the body shop too otherwise I think that repair would probably cost nearly 3 grand.
I hope Lyn was safe and well lol, you seem to deal with alot of crazy Americans Alan are you near an air base
I think he is..he said they hire a lot of Auto's to them in a previous episode.
@@andybramwell9179 okay I'm down in the south west. 👍 We have a Sherman tank parked up but no auto focus lol
Alconbury (Huntingdon UK)
@@robertpowell7672 cheers dude
If only the US drove on the left. Pity they left the British Empire so early. Great video. Your boss is running bangers. My 2005 Mondy is better than that! Was that car worth mending? Most people would have scrapped it.
I wish i was able to say good morning to Monika every morning (if you know what i mean, nudge nudge)
ahh, a proper car at last, mines a '10 1.8tdci titanium estate
there's enough space to get 2 old style spring compressors up the strut tower, + compress the spring enough to get the strut out
i can't keep my driveshafts in, bolts come loose once a year, loctite or not
phone 999, someone's nicked your safety chains...
Lo again, Nice long xmas/new year break eh. Moni. lookn cool all things ok in the world again. Right ,noted the car is an 07 the cost of that repair would make it a breaker up here [Ecosse}. Thanks for the instruction vid. Later.
Probably something to do with the driver being used to driving on the other side shouldn't wonder.
Hate new cars Alan give me an old Mk3 Cortina that will do me
it must be 100x easier to paint it before it is put on the car!? Then absolutely everything will be painted. I would have demanded it if it was my car
Not having ago but who use a 2007 plate car for hire
It's because it's a automatic and the Americans keep crashing them they can't drive manuals
How to replace shock absorber.... with one hand. 😁
its called a fender lol