Thanks Red! 👊🏼 You helped me through my 50 hr service! I have the cab version, so the HST filter is underneath instead of on the floorboard, but your video made it a lot easier! 👍🏻
Next time you change the hydraulic filter use a shop vac in the fill tube. My dealership service manager stated that is what they use to prevent all that fluid from draining out when unscrewing the filter. He stated using that method you may just get a few drops of fluid as the shop vac air pull prevents the fluid from pouring out.
hey, you may want to update title to say it's the CX2510, as there are multiple "2510" models ie CK, CS... the cx2510 is newer, and there aren't many videos like this for it... so adding the CX to your title might drive more traffic your way
Just put money down on a brand new cx2510 cab model yesterday , waiting for the dealer to prep it with a few extras i added to it then the delivery , can hardly wait. Great video btw
@@intheshedwithred5067 understood , I wanted to go up to the next size ( the dk model ) cuz it would be easier to set logs up on my sawmill but I'm only on 2 acres and the cx size will work better I think for maneuvering
Your hydraulic filter came off way easier than mine, I was cursing the factory for welding the dam thing on I bent two ring-type wrenches getting it off ......You did lose a bit more fluid than me, I'm glad that job is done for a while!
I think I had overfilled mine some. Overall it’s a big mess but much cheaper than having the dealer do it. I just rolled over 100 hours so it’s time to do it again now (hopefully smoother this time).
This tractor is a beast for its size. I have probably worked it harder than it should be worked. We just finished planting 15000k pine trees with it and a single seat planter this week putting over 40 hours on it. I only wish it stood a few inches higher to get a little more lift height. Overall I’m happy with the purchase. 100 hour service this week.
Hydraulic fluid is at 100 hours. Drain plug is mid rear axle. Add fluid to port beside right side of seat above orange HST filter on my machine (2021). Some other years are different.
$150 roughly. I bout the filters from my dealer (including fuel filter which I didn’t change but probably should’ve). Took maybe an hour with shooting the video.
Thanks Red! 👊🏼
You helped me through my 50 hr service!
I have the cab version, so the HST filter is underneath instead of on the floorboard, but your video made it a lot easier! 👍🏻
Next time you change the hydraulic filter use a shop vac in the fill tube. My dealership service manager stated that is what they use to prevent all that fluid from draining out when unscrewing the filter. He stated using that method you may just get a few drops of fluid as the shop vac air pull prevents the fluid from pouring out.
Makes sense. Will do!
hey, you may want to update title to say it's the CX2510, as there are multiple "2510" models ie CK, CS... the cx2510 is newer, and there aren't many videos like this for it... so adding the CX to your title might drive more traffic your way
Good video, doing a 100 hour service in the Spring. I had my dealer do the 50 but after watching this I think I'll handle the 100 myself.
Just put money down on a brand new cx2510 cab model yesterday , waiting for the dealer to prep it with a few extras i added to it then the delivery , can hardly wait. Great video btw
With something’s I wish I owned a bigger version but for most of the small farm work I do it works perfectly. Transporting it is easy as well.
@@intheshedwithred5067 understood , I wanted to go up to the next size ( the dk model ) cuz it would be easier to set logs up on my sawmill but I'm only on 2 acres and the cx size will work better I think for maneuvering
Oh myy why didn't you unscrew the hydraulic plug and drain all the fluid?
Where did you find a service manual , I can't find one anywhere ?
Eye luv my ck2510!
Your hydraulic filter came off way easier than mine, I was cursing the factory for welding the dam thing on I bent two ring-type wrenches getting it off ......You did lose a bit more fluid than me, I'm glad that job is done for a while!
I think I had overfilled mine some. Overall it’s a big mess but much cheaper than having the dealer do it. I just rolled over 100 hours so it’s time to do it again now (hopefully smoother this time).
I just crossed 100 hrs on mine so here we go again.
I had to use a filter wrench with a cheater bar to get my hydraulic filter to come off.you still happy with yours? 👍
This tractor is a beast for its size. I have probably worked it harder than it should be worked. We just finished planting 15000k pine trees with it and a single seat planter this week putting over 40 hours on it. I only wish it stood a few inches higher to get a little more lift height. Overall I’m happy with the purchase. 100 hour service this week.
@intheshedwithred5067 thanks for your feedback.👍
Great info, even for us bobcat owners
Surprised no fuel filter change
Im doing a 50 hour service . Do I need to change the hydraulic fluid? Where do I add the fluid?
Hydraulic fluid is at 100 hours. Drain plug is mid rear axle. Add fluid to port beside right side of seat above orange HST filter on my machine (2021). Some other years are different.
GREAT VIDEO BY THE WAY!
WHAT WOULD YOU SAY THE PRICE OF OIL, FILTERS ECT? TOOK MINE IN FOR A SERVICE, OVER $500. I CAN DO IT MY SELF...
$150 roughly. I bout the filters from my dealer (including fuel filter which I didn’t change but probably should’ve).
Took maybe an hour with shooting the video.