I just bought two of these. Easily the best kit. Expensive but it's nice having a quick connect and not having to use electrical boxes and romex. Oh I lied, your video has the old version. Their new one comes prewired and has a quick connect. You don't have to connect any wires yourself - it's awesome.
@@StephenHelwigTalksTech Do you have one for how to install a TV mount? I have seen where people say, you must have studs....that is one thing I am looking to do next as well with a sound bar (Floating idea)
Good job, Brotha! I actually copped 2 of the WM-2 kits on clearance at Wal-Mart for $10/ea. and plan on using one for an upcoming install of my 86" LG. You explained the process very well and I have just subbed to your channel.
I had considered the same, but the reality is, Romex wire is designed to be installed in a wall, an extension cord isn't. If your extension cord in the wall starts a fire your insurance company may have a thing or two to say if you file a claim...
I already have an outlet at the bottom. Can I just take it off and replace with the bottom box or do I have to cut a new hole to install the bottom box?
I'm honestly not sure. I've never done this on plaster and wouldn't want to provide inaccurate info. Maybe check the manufacturers website for the kit you are buying and see if they mention it. Sorry I couldn't be of more help.
That is a better question for a contractor. I personally would avoid doing that. There also shouldn't be a need to cross studs based on the design of the PowerBridge.
Hey Zane, all you need to do is simply route your cables, for instance an HDMI cable, through the slot in the box you installed and the top and then pull it out of the box on the bottom. If needed you can remove the bottom box temporarily to make it easier to access the cable on the wall.
Let me know if the video helped you.
Thanks you!
my god yes, you wouldnt believe how much searching I had to do to find a legit install video ! lol thank you
@@yeah_right88 really appreciate the comment. So glad this helped you.
Your step by step guide is easy to follow.
Thanks
Thanks Auntie
I just bought two of these. Easily the best kit. Expensive but it's nice having a quick connect and not having to use electrical boxes and romex.
Oh I lied, your video has the old version. Their new one comes prewired and has a quick connect. You don't have to connect any wires yourself - it's awesome.
@@NewYears1978 that's amazing. If I have to do this again I'll for sure upgrade.
finally a helpful video, thanks bro !
Glad it was helpful ☺️
Very detailed instructions, love it!
Thanks, glad you found it useful
Excellent...I just purchased a brand new construction house and looking to hang TV wire-free...this is exactly what I needed
So glad you found it helpful. Any ideas for other DIY videos?
@@StephenHelwigTalksTech Do you have one for how to install a TV mount? I have seen where people say, you must have studs....that is one thing I am looking to do next as well with a sound bar (Floating idea)
@@Theaquaplex unfortunately I didn't record that part. You do need to have studs. The mounts are designed so that it will align to a stud.
I put electricity in a closet. It took me 15 minutes including clean up. So simple. Thank.
@@elaineharrison7612 great to hear.
Good job, Brotha! I actually copped 2 of the WM-2 kits on clearance at Wal-Mart for $10/ea. and plan on using one for an upcoming install of my 86" LG. You explained the process very well and I have just subbed to your channel.
Thanks man. Appreciate the kind words. Hope the installs go well.
So quick question, why is a power bridge like this safe to run behind the wall but not the actual tv cord or extension cord?
I suppose you could run an extension cord, however the reason for doing this is as much for looks as for function.
I had considered the same, but the reality is, Romex wire is designed to be installed in a wall, an extension cord isn't. If your extension cord in the wall starts a fire your insurance company may have a thing or two to say if you file a claim...
Romex doesn't heat up and cause fires. No power cords are supposed to be run behind the wall per code
I already have an outlet at the bottom. Can I just take it off and replace with the bottom box or do I have to cut a new hole to install the bottom box?
You need to install the box at the bottom in order to have the wire come out from behind the wall. So you'll need to cut the hole.
Possible to install this on plaster walls as well as drywall?
I'm honestly not sure. I've never done this on plaster and wouldn't want to provide inaccurate info. Maybe check the manufacturers website for the kit you are buying and see if they mention it. Sorry I couldn't be of more help.
@@StephenHelwigTalksTech All good! thanks for the reply!
What happens if you need to cross studs? Can I drill through studs?
That is a better question for a contractor. I personally would avoid doing that. There also shouldn't be a need to cross studs based on the design of the PowerBridge.
Great video, but in order for me to connect other cables to the tv like hdmi I would have to make another hole to route those wires ..
Yes you need to make two holes
It has an opening in the box to pass wires through. Thats what the little brush/wires are in each of the boxes.
You didn't show adding the cables..
Hey Zane, all you need to do is simply route your cables, for instance an HDMI cable, through the slot in the box you installed and the top and then pull it out of the box on the bottom. If needed you can remove the bottom box temporarily to make it easier to access the cable on the wall.
Wait the whole time I watched this I said he sounds like Jordan. Then when he said his name.....DID I JUST FIND JORDAN HOWLETT'S DAD?!
thats a really really really high TV. its viewing height is standing up. very bad
Cool story bro