After buying a new pump pull it apart and re-assemble it with anti-seize on every fastener you lay your eyes on (Including the impeller thread or shaft and keyway). Without it you'll try to replace the mechanical seal 10 years down the track and you won't be able to get the impeller off. That's assuming you'll also be able to get the cover screws off to see the impeller.
Thank you so much for the much use full information.. After a week of use my pump start up and switches off but does not build up pressure i checked all the taps to be closed. What should I do?
Can you come set up the C.R.I pump.we need all the pipes and top connector for the pump and we need filters for a rain water harvesting system.please we need your help thanks
Nice video, thanks. Can you help me calculate how much electricity my water pump consumes per hour. I use a Wizz mini motor made in Italy. 220v.....60Hz....3450min'......0.37kW....0.5Hp
Good day. I have two questions. 1) How do I set the pressure to 1or 2 bar etc. 2) Our Cri Pressure pump gave pressure perfectly. All of the sudden the pump is running but there is no pressure. Please help
I have connected the pressure pump to the jojo tank it pumps water to the ice machine but soon as tge ice machine is full of water to makes ice cubes but pressure doesn't stop at all,,,,not sure if i can leave the pressure pump runs 24hrs without stopping....please advise me as im desperate right now I'm losing business
I installed a brand new pump, it's been 3 weeks, when the pump starts the water coming out is light brown, the water in the tank is very clean, please help
Hi. My pump switch on for 30 sec and turns off for 2 sec and it turns on again for 30 sec and off for 2 sec. It keeps going like that. No leaks are detected as I installed a shut off valve exactly after the pressure switch. Can you help me to solve this problem pls. Thank you.
My pressure remains at 0%. What could cause that problem? Jojo tank is full but a small trickle of water comes out of my irrigation. All valves are open.
The failure light indicates no water running through the pump. If needs be, you are welcome to contact me, for further assistance. My Cell: 083 533 8755. My company : Water solutions, based in Tableview, Cape town.
Good day ,what could be a problem when the failure light is on and pump doesn't pump water ,please help sometimes pump on after 5 second or 10 seconds is off and I always restart for proventive but doesn't work?
I have exactly the same problem. I've only used my pump 1 x and now, the light stays on failure and will not change. You can hear when the power is on as it makes that soft noise. I've checked that the water from the jojo runs, that the tap is open position. I've made sure that the pump tap itself is open, and I've taken off the hose section to get water to flow through the pump but it will not. I've also made sure that I can gently rotate the fins (after spraying them with Q20 in the beginning of my exercise.
Thankyou for the video! Builders Warehouse never had ONE Non-return vlave in stock now when I went there to day! Not One! It is strange for such a Huge Company! Very Dissapointed!
Yes story of my life with Builders! Whatever my shopping list, they will always be out of stock of something. Sometimes for months. As soo as i buy it somewhere else, the next time they will have stock again. Robindale - this is you!
Good day I bought a pressure pump, bought header for pressure pump and floating switch.... Problem is i don't know how to connect them together... PLEASE HELP
Pump is installed between rain water harvesting tank and washing machine. Pump starts fine, lets water into machine, then of course it stops when the machine starts washing, so up to there it works perfectly. However, when the washing machine reaches the rince cycle, ir needs to refill with water and then the pump does not send any water through. What am i missing, please?
Thanks you the video, it is quite useful. In my case I have a pump outside next to the main tank that is supposed to lift water to the secondary tank on the roof. It used to auto work every time we one the tap but today I noticed that it is not working or lifting water to the secondary tank. However, when I push the release button on the pump it sounds working for 5-10 seconds but then turns silent. I am puzzled of what could be the case of this as the router in the pumps core looks rotating but the pump is not lifting water :(
Thank you för this useful video! I wonder if the water tank can also be placed lower than the pump for example under the ground while the pump is still placed on the table? So the pump is higher than the water level? Does it work the same way anyway?
Thanks this video assisted me in getting my pump up and running again.
After buying a new pump pull it apart and re-assemble it with anti-seize on every fastener you lay your eyes on (Including the impeller thread or shaft and keyway). Without it you'll try to replace the mechanical seal 10 years down the track and you won't be able to get the impeller off. That's assuming you'll also be able to get the cover screws off to see the impeller.
Thank you so much because of this Video I was able to free my pump. The fan in the back was cease
This is very helpful. There was an airlock in the pump and plumber guy fixed it. I asked how, he didnt tell me
Thank you so much for the much use full information.. After a week of use my pump start up and switches off but does not build up pressure i checked all the taps to be closed. What should I do?
Great video, helped me fix my pump
Hi there i have connected the pressure pump and it works but doesn't stop when i am not using water
What if the pump is running continuously without any leaks, and doesn't want to cut of when closing the tap?
This is exactly my problem
Any news?
I have same problem
then check pressure sensing section of the pump. It has a small hole leading to the pressure sensor that could easily be blocked
Can heat have an affect on the pump having to be reset mulitiple times? The pump just stops working when it gets very hot during the day.
How does power cuts effect it .if we have no power will the water still flow without the pump
what if the pump is producing a different low sound but unable to bring water from my tank after i have been away for a month
Can you come set up the C.R.I pump.we need all the pipes and top connector for the pump and we need filters for a rain water harvesting system.please we need your help thanks
Thanks a lot for your great information 😎👍✊
Nice video, thanks. Can you help me calculate how much electricity my water pump consumes per hour. I use a Wizz mini motor made in Italy. 220v.....60Hz....3450min'......0.37kW....0.5Hp
Thanks for the info,just bought a pump and I will maintain it accordingly.
Hello David, please tell me,where did you get yours,I am looking for the automatic switch spares
@@derickvilakazi2263 At Builders warehouse
Good day what is wrong when i open a tap in my kitchen the pump don't start , then i must go to the bath room to open a tap to get the pump started
I like your site and the videos, please how do i connect the nagetive and positive power supply to a DAB 2HP surface water pumping machine.
Love and kisses from the Philippines ❤️🇵🇭.
Thanks i need to reduce my pump pressure its at 7 bar ?
My question is the screw right on the top of the pump controller is that screw with the plus and minus supposed to control the pump pressure
Very informative. New subscriber here.
Good day. I have two questions.
1) How do I set the pressure to 1or 2 bar etc.
2) Our Cri Pressure pump gave pressure perfectly. All of the sudden the pump is running but there is no pressure. Please help
I have connected the pressure pump to the jojo tank it pumps water to the ice machine but soon as tge ice machine is full of water to makes ice cubes but pressure doesn't stop at all,,,,not sure if i can leave the pressure pump runs 24hrs without stopping....please advise me as im desperate right now I'm losing business
..
My pump stopped working, was a leak and water has alkaline, the fan is working but have to constantly press the reset button
I installed a brand new pump, it's been 3 weeks, when the pump starts the water coming out is light brown, the water in the tank is very clean, please help
is my pump supposed to be noisy?it's 3 weeks old.was noisy from the first day😢
Can a pressure pump such water from 3 meters underground tank
Hi. My pump switch on for 30 sec and turns off for 2 sec and it turns on again for 30 sec and off for 2 sec. It keeps going like that. No leaks are detected as I installed a shut off valve exactly after the pressure switch. Can you help me to solve this problem pls. Thank you.
I have the same problem 🙈
My jojo pump failure light is on. The motor does not run. What could be problem
can the gauge be fitted on opposite side of pressure valve for visibility purposes?
Guys,please tell me where can i get the the automatic switch spares ?
Thanks for vid. Saved me $$$
Why does it keep running after I close the tap? I can find noo leaks.
my pump has a water leakage which is shooting water from the tiny hole on top of the pump, how can i fix it ?
Same here. The pump has a water leakage and I made a big mistake of opening it and now there is no pressure at all.
@@dmashao1 i fixed mine, i had to change the automatic switcher, and it worked fine
My pressure remains at 0%. What could cause that problem? Jojo tank is full but a small trickle of water comes out of my irrigation. All valves are open.
My pump is only light on power light without starting, i reset it couple of time without start, what could be possible problem?
My water pump is not working even if try to restart it but shows that it is on
Good day, what could be a problem when the failure light is on and pump doesn't pump water, please help
The failure light indicates no water running through the pump. If needs be, you are welcome to contact me, for further assistance. My Cell: 083 533 8755. My company : Water solutions, based in Tableview, Cape town.
Good day ,what could be a problem when the failure light is on and pump doesn't pump water ,please help
sometimes pump on after 5 second or 10 seconds is off and I always restart for proventive but doesn't work?
I have exactly the same problem. I've only used my pump 1 x and now, the light stays on failure and will not change. You can hear when the power is on as it makes that soft noise. I've checked that the water from the jojo runs, that the tap is open position. I've made sure that the pump tap itself is open, and I've taken off the hose section to get water to flow through the pump but it will not. I've also made sure that I can gently rotate the fins (after spraying them with Q20 in the beginning of my exercise.
@@wendytibbitts6257 hi did you find the solution , im having the same problem ?
@@efrenarcasitas1678 hi did you find the problem , im having the same problem
Thankyou for the video! Builders Warehouse never had ONE Non-return vlave in stock now when I went there to day! Not One! It is strange for such a Huge Company! Very Dissapointed!
Hi Kundalini, sorry for the inconvenience. Please send us your contact details on socialmedia@builders.co.za so we can help you get the valve. NM
Yes story of my life with Builders! Whatever my shopping list, they will always be out of stock of something. Sometimes for months. As soo as i buy it somewhere else, the next time they will have stock again. Robindale - this is you!
Good day
I bought a pressure pump, bought header for pressure pump and floating switch.... Problem is i don't know how to connect them together... PLEASE HELP
Pump is installed between rain water harvesting tank and washing machine. Pump starts fine, lets water into machine, then of course it stops when the machine starts washing, so up to there it works perfectly. However, when the washing machine reaches the rince cycle, ir needs to refill with water and then the pump does not send any water through. What am i missing, please?
Hi Belinda. Are you still in need of assistance ? If so, Pls contact me. My cell: 083 533 8755.
Please advise on how to reduce pressure
How long can I run my pump?
Can I connect a pressure tank to the pump
Excellent
Useful but I have a bearing is getting noisy so disassembly must go further than you have shown. Help !
Hi Alan.
If you still need assistance, you are welcome to contact me. My cell: 083 533 8755.
Thanks you the video, it is quite useful. In my case I have a pump outside next to the main tank that is supposed to lift water to the secondary tank on the roof. It used to auto work every time we one the tap but today I noticed that it is not working or lifting water to the secondary tank. However, when I push the release button on the pump it sounds working for 5-10 seconds but then turns silent. I am puzzled of what could be the case of this as the router in the pumps core looks rotating but the pump is not lifting water :(
Hi my Leo pump come on but not pumping water
Thank you för this useful video!
I wonder if the water tank can also be placed lower than the pump for example under the ground while the pump is still placed on the table? So the pump is higher than the water level? Does it work the same way anyway?
How to connect electronic
whats the name of this pump
Very usefull information.
How to instal a Smart head one a pump
Hi,please advise why the pump loses pressure.
Hi.
If you still need assistance, you are welcome to contact me. My Cell: 083 533 8755.
thanks
The pump is running but water not running through the house.
I need someone to service my JoJo pump can I go to any builders and ask someone to come and have a look at it
Awesome vid
Can u assist with qoutation for pump
If you still need assistance, pls contact me. My cell: 083 533 8755. My company: Water solutions.
@@avielinhorn1666 are you based in cape Town?
nothing on how to take it apart... hmm
Pump starts and stopes every minute 15 seconds no leakages are detected what can be wrong ?
Hi.
If you still need assistance, you are welcome to contact me. My cell: 083 533 8755.