Wire EDM Tutorial 04: ESPRIT 3D CAM

This tutorial explains how to create 3D CAM files to cut a lofted part.
In this video series, we will cover how to run and maintain a GF AgieCharmilles Cut 200 SP wire EDM machine, as well as how to program it using ESPRIT.
www.romela.org/

[@TheAzDman]

Very helpful, thank you!

[@nithinraveendran6422]

thank you.

[@rookie-iz1kx]

I have a problem with cutting in 4 axes
simple shape square at the bottom circle at the top both have 10mm diameter 50mm high
on pc everything works fine visualization like in your video works
the problem occurs after using the post processor - the machine displays the wrong drawing in general not related to what I have in esprit
and you would think it's the post processor but cone and 2D cutting works perfectly using it
I also have a second post processor and with it the same thing
advise me what to do, write to the manufacturer (ONA,accutex) or to esprit

[@davidabilash2962]

Thanks so much

[@54warrior]

could the top and bottom geometry be gotten from an imported 3d model?

[@arunachari.machari3879]

How can I do dog leg die open program.job
Like 3 side walls are 90degree one side wall 45 degree ..

[@HIENTRAN-ze9ju]

So why do we need draw in solidwork n import to esprit n we have to do almost everything? I dont see that help anything.

[@syfo_deous]

The solid works drawing was to give us a visualization of what the part is suppose to actually look like before being cut on the wire edm.