miniature 3D scanning on a 4 axis machine 🇬🇧🇺🇲 _ pemindaian 3D miniatur pada mesin 4 sumbu🇮🇩🇮🇩

in the previous video of the TH-cam channel, I fully automatically calibrated my scanner using a 4-axis turntable, so if you are interested to see the calibration process, please watch the my TH-cam channel videos.
In this video I scanned a figure (miniature) on my 4 axis tunable automatically. Generally miniatures are high detail objects and they have lots of deep cavities that are difficult for scanning, but using my 4 axis table, I easily scan them in some few minutes.
This Figure (miniature) on this video is a SLA printed object, not the original one. It is 7cm tall and it has many small details.
in the end of the video, on the mesh scan results, you can clearly see the print layers. These layers are about 0.05mm or less.
Total scan time for this miniature was about 26 minutes, from placing the miature on the turntable to getting the final mesh.
For more info please join us on Telegram :
t.me/DIY_3D_Sc...
__________________________________________
no vídeo anterior do canal do TH-cam, calibrei totalmente automaticamente meu scanner usando uma plataforma giratória de 4 eixos, portanto, se você estiver interessado em ver o processo de calibração, assista aos vídeos do meu canal do TH-cam.
Neste vídeo escaneei uma figura (miniatura) no meu 4 eixos sintonizável automaticamente. Geralmente as miniaturas são objetos de alto detalhe e têm muitas cavidades profundas que são difíceis de digitalizar, mas usando minha mesa de 4 eixos, eu as digitalizo facilmente em alguns minutos.
Esta Figura (miniatura) neste vídeo é um objeto impresso SLA, não o original. Tem 7 cm de altura e muitos pequenos detalhes.
no final do vídeo, nos resultados da varredura da malha, você pode ver claramente as camadas de impressão. Essas camadas têm cerca de 0,05 mm ou menos.
O tempo total de varredura para esta miniatura foi de cerca de 26 minutos, desde a colocação da miatura na plataforma giratória até a obtenção da malha final.
Para mais informações, junte-se a nós no Telegram:
t.me/DIY_3D_Sc...
__________________________________________
pada video channel TH-cam sebelumnya, saya melakukan kalibrasi full otomatis scanner saya menggunakan turntable 4 sumbu, jadi jika anda tertarik untuk melihat proses kalibrasi silahkan tonton video channel youtube saya.
Dalam video ini saya memindai gambar (miniatur) pada 4 sumbu saya yang dapat ditala secara otomatis. Umumnya miniatur adalah objek dengan detail tinggi dan memiliki banyak rongga dalam yang sulit untuk dipindai, tetapi menggunakan tabel 4 sumbu saya, saya dengan mudah memindainya dalam beberapa menit.
Gambar (miniatur) di video ini adalah objek cetakan SLA, bukan aslinya. Tingginya 7cm dan memiliki banyak detail kecil.
di akhir video, pada hasil mesh scan terlihat jelas print layernya. Lapisan ini berukuran sekitar 0,05 mm atau kurang.
Total waktu pemindaian untuk miniatur ini adalah sekitar 26 menit, mulai dari menempatkan miniatur di atas meja putar hingga mendapatkan jalinan akhir.
Untuk info lebih lanjut, silakan bergabung dengan kami di Telegram:
t.me/DIY_3D_Sc...
__________________________________________
I'm interested in DIY 3D scanners and I'm a user of FlexScan3D.
This channel and video is instructive only, I will share my experiences about 3D scanners for all people
Advanced 3D scanning Telegram community: t.me/DIY_3D_Sc...
This video is instructive only, you can read more about 3D scanning and FlexScan3D in the following forum:
www.3dscanforu....
#Scan
#Scanner
#3D_Scanner
#3DScanner
#DIY_Scan
#DIYScanner
#DIY_Scanner
#DIY
#4axisturntable
#turntable
#Automation
#DIY3DScanner
#Turntable
#CAD
#3D
#3Dprinter
#3D_print
#3D_Printer