I've just met Marian in Augsburg Germany and used this tool... It's a "cheap" piece of art that tool. In 2 minutes he removed that bolt, without any problems, without using any heat or even WD40. And the cost to make it was under 20 Euros. It'a fenomenal that tool, and Marian is a great man.
Fabulous hand made tool 👍👍 I've made a similar but much simpler tool (because I'm not an engineer) to do the same job. It consists of a 120 mm length of metal box section, some M10 threaded bar, two 'long' M10 connecting nuts (one for connecting the threaded bar to the pinch bolt and one used for 'pulling' the pinch bolt through the metal box section) and a couple of M10 thick washers/spacers, all costing approximately £20.
Brilliant. So simple. Why do mechanics panic with this job? I am going to do my brothers audi a5 after 3 garages tried and failed. I have my own lathes and milling machines so was going to make a tool. As it is so simple won't take long and no need for my fancy machines. The obvious trick is to deliberately shear off the head of the stuck bolt first.
@@mariangeorge367 Nice tool, but unfortunately it will not work at my car, A6 4F, there is no space for such a tool, because the steering arm blocks the path.
@@mariangeorge367you are sitting on a gold mine. So many Audis with this problem and so many frustrated owners and mechanics around the world! Start making it and sell. I'm sure it will be popular.
Servus! Ich möchte auch etwas kaufen von dir! Kannst du mir sagen was muss ich machen? Kann ich meine Handy Nummer schicken und kann wir gleich auf WhatsApp schreiben
I've just met Marian in Augsburg Germany and used this tool... It's a "cheap" piece of art that tool. In 2 minutes he removed that bolt, without any problems, without using any heat or even WD40. And the cost to make it was under 20 Euros. It'a fenomenal that tool, and Marian is a great man.
Hallo
Ich brauch eine wie viel hatte gekostet?
Fabulous hand made tool 👍👍
I've made a similar but much simpler tool (because I'm not an engineer) to do the same job.
It consists of a 120 mm length of metal box section, some M10 threaded bar, two 'long' M10 connecting nuts (one for connecting the threaded bar to the pinch bolt and one used for 'pulling' the pinch bolt through the metal box section) and a couple of M10 thick washers/spacers, all costing approximately £20.
Any chance you could send over the parts you used so I can make one. Would really appreciate it.
@@Coded19871 Not sure how I can 'send over' the parts I used? but all items used are described in my post above 👍
That's a great idea. Having nightmare on drivers side but for passenger side I'll use your idea, cheers
If this ever goes into production, I’ll be sure to get one!!!
Brilliant. So simple. Why do mechanics panic with this job? I am going to do my brothers audi a5 after 3 garages tried and failed. I have my own lathes and milling machines so was going to make a tool. As it is so simple won't take long and no need for my fancy machines. The obvious trick is to deliberately shear off the head of the stuck bolt first.
Exactly. It's easier to pull it out than to push it through
@@mariangeorge367 How can I get in touch with you if I want to purchase this tool?
Ok but not all of us has the equipment to make this tool, where can we get one? Or do you have a blue print i can take to a machine shop
Looks really nice 🙂What is the thread of upper wishbones bolt?
M10 on Audi A6 (the one shown here)
On the other side you can make also an M8 thread
@@mariangeorge367 is it m10x1.5?
@@piotrkorzynski yes
@@mariangeorge367 can i buy one please?
What threads do you need. Doing my b7 very soon and looks like it will save me a day!
Brilliant idea
That's really awesome
Do what i did and snap both ends of the bolt and then bash it out with a rock and a socket extension
На A4 B7 этот спрсоб применить не получится к сожалению.
What is the diameter of the external thread on the rod?
круто! молодец!!
Good job! What car is shown in the video?
My car, Audi A6 C7, 3.0 TDI
@@mariangeorge367 Nice tool, but unfortunately it will not work at my car, A6 4F, there is no space for such a tool, because the steering arm blocks the path.
Hy verkaufst du dieses Werkzeug auch hätte grosses Interesse.👍👍👍👍👍
Hello, what kind of thread does the pull spindle have? M16 or M20
based on the nut being 30mm, it's probably m20
Hallo!
Wo bekomme ich dieses Werkzeug her?
Where did you buy the tool?
I didn't buy it. I made it myself at my workplace
You should make some more & sell them, a great tool made light work of a stubborn bolt.
@@mariangeorge367you are sitting on a gold mine. So many Audis with this problem and so many frustrated owners and mechanics around the world! Start making it and sell. I'm sure it will be popular.
@@mariangeorge367 Great job. You should make that tool and sell it to the motor trade and the general public, you will make a fortune! 👍
Servus! Ich möchte auch etwas kaufen von dir! Kannst du mir sagen was muss ich machen? Kann ich meine Handy Nummer schicken und kann wir gleich auf WhatsApp schreiben