I've had the chance to use this table a couple of times now. It's fun to whip out in front of people:) I can see what people are talking about when they say the legs are delicate, but they're design to support a "mostly" vertical load, not be torqued from the side or pushed back into place. If you just let the table open or close on it's own and don't force anything, it works great th-cam.com/users/postUgkxyFZUPFEey-PuqsPMxqaykBhgA1LWxFHh Once it's set up, it's pretty solid. My only gripe would probably be related to the clamps provided. They're not the highest quality. They do the job, so no big deal, but they could be better. All in all, pretty cool gadget.
Why are these selfish guys coming out here & pointing down on this guy that has spent time, his own money to put out theses great videos, ? My question is this ,Is it because they know it and do not wants us pay them to buy it from them, or they they don't people like me to know?
Wie immer geniales Video von Guido Henn. Auch wenn mich die Musik langsam etwas nervt. Hatte heute ein Telefonat mit Festool. Ratet mal was da für Wartemusik gespielt wurde :-). Aber die Videos sind absolut genial! Ach ja: Genial finde ich, dass er in diesem Video wirklich mit grundlegenden Werkzeugen arbeitet und keine Super-Duper Spezial Maschinen einsetzt, die eh keiner zuhause hat...
Agreed. Similar the endless routing footage was pointless. If you're going to make someone watch, at least get in closer so they can actually see the router cutter and what it's cutting, as opposed to the entire router moving in something you can't see because of the camera angle!
Congratulations, There are many professionals unable to afford such equipment from the video, now they will be happy to make their own equipment, forcing the industry to sell cheaper.
Hello! Besides the great idea, also I enjoyed the drill holder which is shown in the video. It would be possible to send information on this support or the link to your manufacturer? thanks
Hey partner, you can show a 5 second clip of a milling operation and the viewer will infer the operation was longer than shown on screen. No need for exhaustive coverage of routing. 😅 Good work nonetheless!
Over 1yr later and I still don't know the name of the drill in the wabecco stand. I'm looking to purchase that stand but would like a good accurate drill to purchase for it, so please, if anyone has any idea, would you please leave a comment. Thank You.
Beautiful workmanship, great care in fixturing for best results. Are there drawings / plans? And parts lists? And, forgive me for asking for so much, but I'd like to also know more about the drilling tool (arms, etc,). Thank you for the time, effort, and inspiration (seeing great work).
Witam i pozdrawiam!!Bardzo pomyslowo wykonany stol stolarski,duza wiedza,duzo pracu i cierpliwosci w ten stol wlozono!!Ciekawe wykonastwo!!Prima!!Dobry material Filmowy!!
Hello Great Video, you are very talented! What is the name and brand of drill press/stand that you are using with this Protool drill please ? Also what model is this protool drill? Thanks
Ich bin Brasilianer Nachkomme Deutsch. Ich spreche kein Deutsch , aber ich verwendet, den Übersetzer nur sagen, wie ich an diesem Tisch Ich wünschte, ich hätte eine von ihnen ist ein Traum verwunderte. Herzlichen Glückwunsch !! Unterzeichnet: Dimas Krolman
Very nice, but you need some fancy toys to make that toy, and that hardware is top-o-line. I did a much less complex and expensive leg vise on my channel, but I will say yours is the most fanciest of the fancy pants leg vise designs!
I cant believe i will have to use a tap, lol... but all that aside i cant wait to install it and use it, building my first real work table. If i have to use a tap, I have to use a tap, I have them lol curious about those drill presses though.
Gutes Video, aber die Musik ist echt tödlich. Und zeigt wie angestaubt Deutsche sind. Handwerk ist auch kein romantisch verklärter Selbstfindungstrip, wie die Musik vielleicht weiß machen will.
+Schorschiism That is a fantastic drill press. The first one I've seen so far that I can actually use over the side of the bench to drill into a door or large frame.
Tapping a hole with a hand held drill motor is not the best, even though the holes were drilled perpendicular by the drill press. As seen, the hand drill will wobble cutting irregular weaker threads. Also, a tap will not always track straight in the hole just because the hole is true. It would be better to have a variable speed motor in the drill press and use that to run the tap into the hole if possible. I use a drill press for drilling and then tapping into wood or steel. After drilling the holes I remove the belt and turn the pulley by hand.
I built this bench with some minor modifications. This video, along with the other on the wagon vise, really helped explain the installation of the vises. I found a great article on cutting Condor Tails, which are the very large dovetails on the wagon vise in a back issue of popular woodworking. Cutting the " Chop", which is the large recess cut out for the leg vise was made much easier with that same set up of the large guide bars supporting the fences on either side of the router. It is not an inexpensive or quick project but well worth your time. Guido's skill is exceptional and the video makes the process much easier.
Esto bajo mi punto de vista es una exhibición del que puede tener y comprar este tipo de maquinaria y materiales de primerísima calidad no al alcance de todos, así cualquiera ... ya me gustaría ver como lo hace con un clásico formón y sierra de mano y herramientas ordinarias.
good worker. but three critics. dont blow dust. use brush , airgun or dust cleaner. second, dont shoulder the lines (electric or dust collecter) it choke your neck. and in the middle of rotating moters, never hands off your tools. it kill you.
Guido, Bitte, where do you source the aluminium chanel us use in your frastich build I have a sister coming from German in 2 weeks she might bring some pieces
Wow after seeing the vice in action (3 years after it was posted haha) I fully understand the advantage of the steel wheel. It may be a little while until we can get a vice of this caliber into our shop, but i have no doubts that it is a must! I even dreamt that there was one on my bench!
Hello , good afternoon . I'm from Brazil and I wonder where I can find the support of the drill machine used in the video. I await your response. Thank U.
Estou tendo uma ideia, não sei se original, mas no uso de macacos hidráulicos de 2 toneladas que tem um custo de 60 reais, dispensando metade dos grampos sargentos etc do caminho, na morsa de mesa como no uso geral. Práticos área de abrangência de força superior e com o uso são práticos de manejar 4 macacos um par exercendo força no objeto a colar ou furar contra o outro seria 4 toneladas de força, precisa de mais que isso?
Forgot to mention in my previous comment the radial arm drill, never seen one like that before and with help of other comments have located them in Germany, thank you all.
Ich genoss Ihre aussage Video. Können Sie someinformation über die Bohrmaschine zu geben. Es scheint sehr acurate , tragbar und einen geliebten Menschen , dass sie verwendet werden, eine tatsächliche Bohrer. Wer zu machen , dass die Bohrmaschine ?
I've had the chance to use this table a couple of times now. It's fun to whip out in front of people:) I can see what people are talking about when they say the legs are delicate, but they're design to support a "mostly" vertical load, not be torqued from the side or pushed back into place. If you just let the table open or close on it's own and don't force anything, it works great th-cam.com/users/postUgkxyFZUPFEey-PuqsPMxqaykBhgA1LWxFHh Once it's set up, it's pretty solid. My only gripe would probably be related to the clamps provided. They're not the highest quality. They do the job, so no big deal, but they could be better. All in all, pretty cool gadget.
A pleasure to watch a true craftsman at work.
Awesome work all the best from Chicago that is good for next 150 years ,
Why are these selfish guys coming out here & pointing down on this guy that has spent time, his own money to put out theses great videos, ? My question is this ,Is it because they know it and do not wants us pay them to buy it from them, or they they don't people like me to know?
SuperKwame1
I'm just here riding the elevator......
Wie immer geniales Video von Guido Henn. Auch wenn mich die Musik langsam etwas nervt. Hatte heute ein Telefonat mit Festool. Ratet mal was da für Wartemusik gespielt wurde :-). Aber die Videos sind absolut genial! Ach ja: Genial finde ich, dass er in diesem Video wirklich mit grundlegenden Werkzeugen arbeitet und keine Super-Duper Spezial Maschinen einsetzt, die eh keiner zuhause hat...
Tolle! Herzlichen Glückwunsch zum Kanal und vielen Dank für das Video und die Tipps! Umarmungen hier aus Südbrasilien 🤘🏾👍🏽
I like your videos but this song is killing me :)
There's a hole in his bucket.
Agreed. Similar the endless routing footage was pointless. If you're going to make someone watch, at least get in closer so they can actually see the router cutter and what it's cutting, as opposed to the entire router moving in something you can't see because of the camera angle!
wayd19 mo io
I like the endless routing footage as it shows something not usually included in videos, good technique over the length of the project.
there's a volume down button in you device, if you bother to press it !
I have a Harbor Freight workbench and it comes with storage drawers and works great.
Congratulations, There are many professionals unable to afford such equipment from the video, now they will be happy to make their own equipment, forcing the industry to sell cheaper.
Why do I feel like I'm on-hold with the cable company?
I was thinking more a 1970's porno movie! Great skills nonetheless!!
I would also like to know more about the drill press. Also a great video.
For real good threads fill holes with boiled linseed oil, keep full for 24 hours. Threads will cut and be strong after 24 hours.
Nice work sir please keep it up
Hello!
Besides the great idea, also I enjoyed the drill holder which is shown in the video.
It would be possible to send information on this support or the link to your manufacturer?
thanks
It's a wabecco
Hey partner, you can show a 5 second clip of a milling operation and the viewer will infer the operation was longer than shown on screen. No need for exhaustive coverage of routing. 😅 Good work nonetheless!
nice and precise job.
Does anyone know what the name of the drill being used on the wabeco stand is?
Over 1yr later and I still don't know the name of the drill in the wabecco stand. I'm looking to purchase that stand but would like a good accurate drill to purchase for it, so please, if anyone has any idea, would you please leave a comment. Thank You.
on Wabeco website the stand has a couple different drills pictured. One says Kress and that looks close tot he drill in the video.
What kind(brand) of drilling machine did you use in this video? It looks like very precise.
Beautiful workmanship, great care in fixturing for best results. Are there drawings / plans? And parts lists? And, forgive me for asking for so much, but I'd like to also know more about the drilling tool (arms, etc,). Thank you for the time, effort, and inspiration (seeing great work).
Us poor guys who can't afford Festool just use a tail vise with the old-fashioned leg support and it works just as well.
A good vise!
Witam i pozdrawiam!!Bardzo pomyslowo wykonany stol stolarski,duza wiedza,duzo pracu i cierpliwosci w ten stol wlozono!!Ciekawe wykonastwo!!Prima!!Dobry material Filmowy!!
Hey there great job. Can you please tell me what is the brand of your drill stand newer seen one like that. Best regards erik.
Pure joy to watch ! Thanks
Hello
Great Video, you are very talented!
What is the name and brand of drill press/stand that you are using with this Protool drill please ?
Also what model is this protool drill?
Thanks
Vladimir Petrov
www.wabeco-remscheid.de/bohrstaender-zubehoer/bohrstaender-fraesstaender/bf1240-saeule-500-mm-ausleger-350-mm.html
pro video, methinks the sound of a router is better than the lift music tho
Ich bin Brasilianer Nachkomme Deutsch. Ich spreche kein Deutsch , aber ich verwendet, den Übersetzer nur sagen, wie ich an diesem Tisch Ich wünschte, ich hätte eine von ihnen ist ein Traum verwunderte. Herzlichen Glückwunsch !! Unterzeichnet: Dimas Krolman
Восхитительно!!!
Please tell me about your drill press/drill holder.
tres beau travail minutieux qu'elle est la marque de la colonne de perçage SVP merci
Задолбался проматывать! Ещё надо было снять обеденный перерыв и походы в туалет!
Very nice, but you need some fancy toys to make that toy, and that hardware is top-o-line. I did a much less complex and expensive leg vise on my channel, but I will say yours is the most fanciest of the fancy pants leg vise designs!
I cant believe i will have to use a tap, lol... but all that aside i cant wait to install it and use it, building my first real work table. If i have to use a tap, I have to use a tap, I have them lol curious about those drill presses though.
Very good job..
What kind of drill press have u used?
La verdad no tengo palabras, como trabaja y verlo es un deleite con todas esas herramientas, gracias por compartir este video. atte. César
Excelente!! Un trabajo muy detallista, que genera placer verlo. Lo felicito. Muchas gracias por compartir, salu2 desde Argentina
The drill stand is from Wabeco. They have a website. I am almost certain the drill itself is Fein.
Gutes Video, aber die Musik ist echt tödlich. Und zeigt wie angestaubt Deutsche sind. Handwerk ist auch kein romantisch verklärter Selbstfindungstrip, wie die Musik vielleicht weiß machen will.
Like many, I would like to know the name brand of your drill press? Thanks.
+Kenneth Conner Yeah right. that is one kick butt drill press.
Looks like a Wabeco drill holder: www.ebay.de/itm/like/141938965499?lpid=106&chn=ps&ul_noapp=true
+Schorschiism That is a fantastic drill press. The first one I've seen so far that I can actually use over the side of the bench to drill into a door or large frame.
Has anybody had any luck trying to order the drill holder? I searched on Ebay USA but they don’t have it, it seems there it’s only sold over seas
Wonderfull - VIELEN DANK - Sehr GUT & usable 2 learn & distribute this amazing knowledge!
Tapping a hole with a hand held drill motor is not the best, even though the holes were drilled perpendicular by the drill press. As seen, the hand drill will wobble cutting irregular weaker threads. Also, a tap will not always track straight in the hole just because the hole is true. It would be better to have a variable speed motor in the drill press and use that to run the tap into the hole if possible. I use a drill press for drilling and then tapping into wood or steel. After drilling the holes I remove the belt and turn the pulley by hand.
I would of used a larger tap and more of a buttress thread. That looked around 8mm fine, fat too puny for wood.
¿donde venden esto?, ¿como comprar esto?
Nice work. Speed set at 1.5 makes it easier to watch , and the music is more lively ! :-)
I built this bench with some minor modifications. This video, along with the other on the wagon vise, really helped explain the installation of the vises. I found a great article on cutting Condor Tails, which are the very large dovetails on the wagon vise in a back issue of popular woodworking. Cutting the " Chop", which is the large recess cut out for the leg vise was made much easier with that same set up of the large guide bars supporting the fences on either side of the router. It is not an inexpensive or quick project but well worth your time. Guido's skill is exceptional and the video makes the process much easier.
I'm also building this bench and have been looking for the large guid bars, do you know where to find them?
finalna obrada stolarije
Esto bajo mi punto de vista es una exhibición del que puede tener y comprar este tipo de maquinaria y materiales de primerísima calidad no al alcance de todos, así cualquiera ... ya me gustaría ver como lo hace con un clásico formón y sierra de mano y herramientas ordinarias.
He did not say a word in English, but I understand the whole video......Thanks
Well done! Clean workshop, accurate precise workmanship....a beautiful Roubo!
good worker. but three critics. dont blow dust. use brush , airgun or dust cleaner. second, dont shoulder the lines (electric or dust collecter) it choke your neck.
and in the middle of rotating moters, never hands off your tools. it kill you.
Guido, Bitte, where do you source the aluminium chanel us use in your frastich build I have a sister coming from German in 2 weeks she might bring some pieces
Wow after seeing the vice in action (3 years after it was posted haha) I fully understand the advantage of the steel wheel. It may be a little while until we can get a vice of this caliber into our shop, but i have no doubts that it is a must! I even dreamt that there was one on my bench!
amazing vidz, please drop the 80's jazz
Hello , good afternoon . I'm from Brazil and I wonder where I can find the support of the drill machine used in the video. I await your response. Thank U.
OI BOM DIA
CARO AMIGO PROCURE NO SITE DA FESTOOL BRASIL TENHA UMA BOA TARDE
wsequipamentos.com.br/index.php ESTE É O SITE
What make is the radial drill press/guide? Not come across one that isn’t a stand alone press and that instead accepts a corded drill
Hey friend. It's like watching paint dry !!! But good work
Estou tendo uma ideia, não sei se original, mas no uso de macacos
hidráulicos de 2 toneladas que tem um custo de 60 reais, dispensando
metade dos grampos sargentos etc do caminho, na morsa de mesa como
no uso geral. Práticos área de abrangência de força superior e com o uso
são práticos de manejar 4 macacos um par exercendo força no objeto a
colar ou furar contra o outro seria 4 toneladas de força, precisa de
mais que isso?
This is more wood machining than wood working. Too many store bought gadgets.
Esa si es madera de primera, no la que venden en home depot...
J.Sacramento Rico Ortiz si ves los planos el hase la mesa desde cero y la madera es rústica
THERES A HOLE IN YOUR BUCKET DEAR HENRY
Forgot to mention in my previous comment the radial arm drill, never seen one like that before and with help of other comments have located them in Germany, thank you all.
Pesadísimo el video!
Ölçülendirme hakkında bilgilendirme yok. Neden.
Need more info on the drill stand!
Looks like a Wabeco drill holder: www.ebay.de/itm/like/141938965499?lpid=106&chn=ps&ul_noapp=true
Vorspulen ist für dich ein Fremdwort, auch schneller vorlauf genannt! Das Video wäre nur ein Drittel so lang...
I love the Roubo style woodworking bench, wish I could make and use one!
Great project but not sure of the music.👍🤣
Top craftsman, looks like good quality. It's just the music I hate, it's like an ear worm.
ja,das mit der Musik stimmt..........
Favor me informar onde consigo este suporte para esta morsa de bancada?
like me,thanks from México Neza Land City
No tools .not do it. PROFRESIONAL.
I wonder how much the woods itself cost.....
Hola. Dónde consigo la columna para el taladro vertical. Esa se ve que tiene la función de calibrar los lados.
leon prok
Jaime Simón qq
Aqui la tienes, parece muy buena www.ebay.de/itm/like/141938965499?lpid=106&chn=ps&ul_noapp=true%EF%BB%BF
Gracias. SAludos, amig@
schenkt dem Guido mal einer ne CD mit hörbarer, gema-freier Musik?
Отличная работа, но ролик можно было уложить в 10-12 минут.
I like the project. But the vid could be faster. Watching him hammer away the thread rod aaaaaaahhhhhhhhhhh
Nice job. Very nice craftsmanship. Video is too long. Various segments could have been accelerated at 2x, 4x speed etc.
Does anyone know what type of extension is he using to drill the main screw hole with the forstner bit?
Mi piace la presicione con que se lavora
sorprendente.aunque sea artesanal tratare de hacerlo.un abraso desde Chile
Very nice. Where can I bay this vise set.
Muy bien hecho todo el video. lo hacen tan sencillo que párese muy fácil que encantado
And this was not paid for by Festool :)
Ich genoss Ihre aussage Video. Können Sie someinformation über die Bohrmaschine zu geben. Es scheint sehr acurate , tragbar und einen geliebten Menschen , dass sie verwendet werden, eine tatsächliche Bohrer. Wer zu machen , dass die Bohrmaschine ?
+Prasannah Parivnate I would not know, but thanks for the information.
Thank you for the info guzzi73
I like your drill holder.
Super Video. Was ist das für ein Gewindebohrer?
wow im impressed by the precision and the quality
a good job, you do not have a manual with the dimensions to build the table, thanks.
I like your drill press. Who's the maker? Thank you.
What kind a stand for your drill you have?
Good Morning. I would like to know the make and model of this drill bench that you use this video.
Grateful.
Eduardo Villegas Reis
The music is awful.
Момент когда он крутанул колесо и тиски сами начали зажиматься это видео из разряда залипательных.
Great video showing multiple jigs being used for great results.
where did you get your drill press ?
You are a true master!.Thanks a lot.
Excellent workmanship.
watching this was pure pleasure for me
how to use a table saw
Mi querido ingeniero, te quiero mucho.