so strange that you make it look so easy n quick that some might not know how much practice goes behind every stage of handling iron and wood . well done sir. very enjoyable video.
Impresionante y excelente tu trabajo, siento envidia sana por lo que haces, siempre quise hacer algo así,mis felicitaciones y muchas gracias por mostrarnos tu trabajo.
Awesome blade! Would have likes to see a nice sheath too...one with leather inside and wood on the outside so that you can actually feel that beautiful blade gliding out.
I've only one thing for you. Wear protective gloves, the real ones,especially during the sharpening phase. Keep on safety mate, fingers don't grove on trees
Couple of things, take it however you want...because each to their own and I am assuming you’re both adults. And these are just my reasons and many, many other knife makers. 1: Gloves and a grinder? No. No matter how tight, or what material, wether they be cut resistant, flame resistant, whatever, are good way to lose your fingers in the machine if the material gets caught. 2: You need to feel how hot the steel is getting after heat treatment so you don’t ruin the temper. Knife making PPE is simple: Protect your lungs with a respirator protect your eyes with safety glasses and protect your ears with ear plugs, ear muffs with the highest db reduction you can find. Peace ✌️and great job on your tanto👊
@@griffithshandmade-knives In the future, I will upgrade my heat treatment equipment to ensure temperature accuracy. So far I can only rely on experience for heat treatment. Thank you for your reminders and suggestions.
@@creatorqi I was only commenting on why you should not wear gloves in reply to VENOM. I made no comment on your heat treatment, that’s your business. Grinding after heat treatment if you wear gloves you may not be able to feel how hot the knife is getting. Good luck 👍
When yo do the heat treatment how do yo do that i now you heat it up and put it in a oil i think wich oil or what it is can you please answer wich oil it is🤝🥺🥺
This is a sharpening system that can be purchased directly on Amazon, but I do not recommend buying this model of sharpener because it is difficult to use.
I agree.....its sucks when flesh hits a belt but at least you can jerk back and say damnit. Let it grab a glove and who knows what will happen. I had a close call with my angle grinder and an unbottoned shirt over a t shirt....luckily the air from the motor blew my shirt away but one grab and that thing would have wound itself up in my shirt slapping my face, ribs, grinding, who knows what else.
You're saying that as if you can just snap a fairly thick piece of steel in one swing just because it has sharp corners on it. It may not be ideal ,but it's not gonna "snap as soon he hits something with it".
@@creatorqi I understand completely my friend. The blade is outstanding and craftsmanship is stellar and completely top shelf. Bless you my friend 🗡⚔️🔪👍🇺🇸
Sorry, I just found your message in the pending review. Here is the download link: drive.google.com/file/d/1-QZ8MuKjNFpGN2_i7i8TXYgUSgVzglKG/view?usp=sharing
If the epoxy fills all the gaps between the tang and the wood, you're more likely to shatter the wood than pull that tang out of the handle. Don't let forged in fire tell you otherwise.
so strange that you make it look so easy n quick that some might not know how much practice goes behind every stage of handling iron and wood . well done sir. very enjoyable video.
Thanks, bro!!
Tôi cũng thích tạo ra những sản phẩm như này. 1 like ủng hộ bạn 😄😄😄
Thanks man!
Hi Qi now that I have to say it is very smooth and perfect clean 👌 tanto knife it's beautiful 😍 nice job
THAT KNIFE LOOKS BADASS!
Impresionante y excelente tu trabajo, siento envidia sana por lo que haces, siempre quise hacer algo así,mis felicitaciones y muchas gracias por mostrarnos tu trabajo.
beautiful tanto
Il 's beautiful
Interesting. I like it
Слов нет, одни эмоции!
Bravissimo!!!!!! Ottimo lavoro.
Awesome tanto, Great video! Glad to have you here on TH-cam. Stick to it and the subs will come!
Glad you like this work, and thank you for your subscription.
You are such a skillful and creative craftsman, the knife is so beautiful
Thanks. If you like my video, please follow my channel if you can, I will continue to update the creation video.
The best Tanto👍♥️
Good IDEAS
Nice....👍👍👍
Mantap.....#indonesian speak
Damn from the get go that blade is looking great already 😉👏👏👏 nicely done
excellent work.... congratulations!!!
That's a great looking tanto, great job. You now have a new sub
Thank you sir!
Beautiful work! 😀
Wow... gorgeous. If I had the skills and the tools I would definitely recreate this knife. Awesome video!
Hope it can be made in your hands soon.😉
Beautifully made knife. Well done.
Thanks!
It is very sharp
would love that in my collection.
Beautiful and seems to work great!
Thanks.
Nice design, rocking...
哈,快熬出头了。
似乎是有那么一点苗头了
It's so beautiful. How many inches long is the blade? How many inches wide is the blade?
Awesome blade! Would have likes to see a nice sheath too...one with leather inside and wood on the outside so that you can actually feel that beautiful blade gliding out.
Maybe I will add a beautiful leather scabbard to him in the future. Thank you for your support.
absolutely fantastic job mate.
Thanks.
good job, good working knife.
Thank you sir!
Assim que essa cola ressecar esse Cabo vai soltar
Piękne cudo😉
Very beautiful, how many centimeters long blade?
Love it
Good Job!.
Thanks.
Good work in very nice...how many times in oven?
Impressive ..good work bro
soft manganese steel , is that a good knife steel ?
Very nice,
I don't have the equipment or space for a shop ,
How much ? Just for the knife?
Very sorry sir, this knife not for sell.
Very beautiful tanto knife. What steel use my friend.
It is 65 manganese steel.
I am glad you like this knife.
beautiful knife brother, very well made
Thanks bro!
I've only one thing for you. Wear protective gloves, the real ones,especially during the sharpening phase.
Keep on safety mate, fingers don't grove on trees
Thank you for your reminder, I will always put safety first.
@@creatorqi
Good 👍👍👍
Couple of things, take it however you want...because each to their own and I am assuming you’re both adults. And these are just my reasons and many, many other knife makers.
1: Gloves and a grinder? No. No matter how tight, or what material, wether they be cut resistant, flame resistant, whatever, are good way to lose your fingers in the machine if the material gets caught.
2: You need to feel how hot the steel is getting after heat treatment so you don’t ruin the temper.
Knife making PPE is simple:
Protect your lungs with a respirator
protect your eyes with safety glasses
and protect your ears with ear plugs, ear muffs with the highest db reduction you can find.
Peace ✌️and great job on your tanto👊
@@griffithshandmade-knives In the future, I will upgrade my heat treatment equipment to ensure temperature accuracy. So far I can only rely on experience for heat treatment.
Thank you for your reminders and suggestions.
@@creatorqi I was only commenting on why you should not wear gloves in reply to VENOM. I made no comment on your heat treatment, that’s your business. Grinding after heat treatment if you wear gloves you may not be able to feel how hot the knife is getting. Good luck 👍
What is the width and length of this
When yo do the heat treatment how do yo do that i now you heat it up and put it in a oil i think wich oil or what it is can you please answer wich oil it is🤝🥺🥺
This is ordinary cooking oil, easy to find
Everything is perfect...but what about sharpness test...
Fabulous job bro
Thanks. Please follow my channel if you can, and I will continue to update the creation video.😁
👍👍👍
Great job man. I like your channel 👍🤩😊
Thank you sir.
Из какого дерева лучше всего изготовить рукоятку для ножа?
В видео он из какого дерева делает рукоять?
Life is a foreign language; all men mispronounce it.
perfekt
عالی
Very good job!Big like👍 from me! I am also in knife making, outdoors and shoot some videos to. Keep on!!!
Nice . Already bookmarked and looking forward . What kind of sharpener is that? And the usual ?s how is it ? How much $ cost etc etc
This is a sharpening system that can be purchased directly on Amazon, but I do not recommend buying this model of sharpener because it is difficult to use.
Nice bro!Привет из России)
Thanks bro!
Novus here, what is that bluing you use for scribing?
I meant novice
@@rich2760 It is mainly made of gentian violet, and you can find it on Amazon.
Hey I’m just starting to get into knife making complete beginner what are all the tools you used? Thanks awesome blade
Great job!!!!
Where are you from?
Im from 🇨🇳🇨🇳.
Thanks for your watching!❤❤
How long did it take to make.
About 6 days, but not every moment.
What angles are the bevels
Observe while polishing until you see that the polishing line coincides with the mark line.
How to avail this nkife. How much
How to avail? Sorry sir I don't understand what your meaning.
And, this knife not for sell, thanks.
Excelente. How much?
Not for sale, no price
One day young Padawan... you will realize that gloves with grinder do not mix...it will be a grabbing experience ... good vid though
Thanks for your advice.
@@creatorqi He's serious, my brother went to the hospital with a broken wrist and chewed up hand doing that
Thank you for your reminder, I will keep it in mind, after all, safety first.
I agree.....its sucks when flesh hits a belt but at least you can jerk back and say damnit. Let it grab a glove and who knows what will happen. I had a close call with my angle grinder and an unbottoned shirt over a t shirt....luckily the air from the motor blew my shirt away but one grab and that thing would have wound itself up in my shirt slapping my face, ribs, grinding, who knows what else.
@@johnwirk It seems that I have been lucky so far, there has been no accident, and I will be more careful in the future.
Wich is the blade lenght?
About 290mm.
不错啊
有看到不对的地方就请多指教啦
@@creatorqi 哪里哪里,其实整个设计和做工都很好,比例也很舒服
硬要说的话,就是最开始修型的时候,刀柄靠近两个肩膀(放护手位置)的地方可以稍宽一点 这样整个刀的强度更大,可以参考这个图片i.pinimg.com/originals/e5/89/2e/e5892eab2b1ab05e53eecdce95c3dd53.jpg
Is that a plunge I see!!! No no nope
4:05 - 4:15 What kind of tempering oven is that? It came out so shiny.
The polishing step is skipped after tempering, which is not the effect of tempering.
@@creatorqi I was just being an a**. You did a beautiful job on this project.
もう一度短刀の形を見てから作ってくださいよ なんやねんこれwww
As soon as you hit something with it it's gonna snap at the crossguard cause you made the corners sharp instead of rounded
You're saying that as if you can just snap a fairly thick piece of steel in one swing just because it has sharp corners on it. It may not be ideal ,but it's not gonna "snap as soon he hits something with it".
@@mrkiky watch forged in fire you'll see how easy that "thick" metal snaps
@@3cho787 It really only snaps when there's a crack or a problem with the heat treat, or both. Those sharp corners are not that big of a stress riser.
Possible to buy this
This is not for sale, sir.
How much if i want to buy like this friend?
I'm not sure, I have never had experience in selling knives.
@@creatorqi innovationpride@gmail.com
Contact me please
Could I purchase one of these blades my friend. Your craftsmanship is outstanding indeed 👍🔪⚔️🗡🇺🇸
Thank you for your love, but it is not for sale.
@@creatorqi I understand completely my friend. The blade is outstanding and craftsmanship is stellar and completely top shelf. Bless you my friend 🗡⚔️🔪👍🇺🇸
Cn I buy it
Not for sale, sir.
Can order now...??
Sorry sir, this knife not for sale.
@@creatorqi ok.,thanks
Where is template ?
I only have CAD files on my computer.
@@creatorqi please give me template
Maybe you should leave the email so that I could send you the file.
@@creatorqi my e-mail malikeremkara13@gmail.com please send me template
Sorry, I just found your message in the pending review. Here is the download link:
drive.google.com/file/d/1-QZ8MuKjNFpGN2_i7i8TXYgUSgVzglKG/view?usp=sharing
All you have is epoxy holding the handle on????
Yes, I think this is enough to bond the blade and the handle firmly. So far this knife has not shown any looseness.
If the epoxy fills all the gaps between the tang and the wood, you're more likely to shatter the wood than pull that tang out of the handle. Don't let forged in fire tell you otherwise.
Кто читает комент тому здоровья успехов во всем, и пажалуйста автор сильно пытаеться собрать много подписчиков давайте ему соберем плизз
Сколько стоят твои ножи
Жаль нет цены, не продается.
quarantine made a lot of people create a youtube channel....
Indeed.
when is the new video?
coming soon. Release in the next three hours.
@@creatorqi Great!!!
Soft manganese steel??! WTF!!
Of course the blade is a soft material before quenching.
❎❎🚩⛤⛥⛦⛧✡☚🗿➿💯
Impressive ..good work bro
Thanks.
Excelente. How much?