Do you take orders?, I am non technical person, and I need this for myself, if you are okay to make me one "ready to use" setup LED Matrix, I am willing to pay Looking Forward.... please reply me how to contact you for this order
What about the power consumption of the 32x8 panel itself? According to AliExpress it's using 75 watts but you're only using a 15 watts power supply. Thanks in advance!
@@daanvanvuuren4877 I didn't check the power consumption, but 15A seems to be odd. Approximately 30 percent of LEDs are lit at the same time and not at full brightness. Of course, if you turn on all LEDs, "RGB" it can and will consume more. For this project, I do not think it makes sense to put a more powerful power supply than 5 amps.
I will never understand why something like the LaMetric is so expensive at ~250€, while the components themselves are less than 30-50 depending where you order. Of course software costs too, but for what they offer it's a joke tbh... I love this project and might just build my own this way! I love that I can control everything on it this way :)
very well explained, thanks! I have made it without any problem. I also print the diffuser for leds and it works great. next time I will try to make with the speaker
This is excellent work, and something I intend to attempt to build in the coming weeks, thanks for your efforts. One thing I am puzzled about is how you bonded the 3 parts of the led diffuser ?
yes, I printed the case and the grid in 2 parts and then glued them together. I don't remember the cost for all, but for now, it is not worth all the hassle, you can buy a ready-made device not that expensive (DIY cost + 20$).
I followed all the steps. Flash is successful. However, when I connect to the web interface (IP of the ESP device), it appears as "Connectionm: Ooffline". I can't access anywhere in the Dashboard or other selections. I did the experiments with 2 d1 mini and 2 Nodemcu. The result is the same. I'm open to your advice. Thank you.
Hi, the firmware isn't my project, so I'm not informed about any recent changes in the latest version. I recommend posting your issue on the official forum.
Hi and Thanks!!!, back cover is not my design so I can't say anything about speaker size. You can search in Thingiverse, there are many variations of this case.
Hi, I have Awtrix with wemos D1 but hate the fact I need to keep my pc on all the time as host (I know I have to get a raspberry) Can I use this project as stand along clock without the need to keep on the pc as a host?
Hi, 1) Don't buy raspberry pi, instead, get a Small form factor pc like HP T620 - 45-50 euro 2) Try shutting down your computer and check, if Awtrix have wifi connection, in theory, it will work "I didn't check so I don't know"
Thanks for sharing your project.. I would like to display an attribute like the instant energy consumption, can you help me on how to set it up with nodered? Thanks
@@PricelessToolkit I tried to add it, but I can't run it so it would work. I don't know how to connect it so that it works. I probably have little knowledge for this :((
Hi. Unfortunately, I don't have these files. All files that I have are in GitHub. Search on Thingiverse, I think there you will find almost identical cases.
![[LIVE] : ONE ลุมพินี 89 | คู่เอก "ยอดไอคิว vs คิริลล์"](http://i.ytimg.com/vi/Z3vYkHJ_5Ig/mqdefault.jpg)
📣 UPDATE 2024 - Ready Made device from Ulanzi s.click.aliexpress.com/e/_DkP2J2D
Do you take orders?, I am non technical person, and I need this for myself, if you are okay to make me one "ready to use" setup LED Matrix, I am willing to pay
Looking Forward.... please reply me how to contact you for this order
What about the power consumption of the 32x8 panel itself? According to AliExpress it's using 75 watts but you're only using a 15 watts power supply. Thanks in advance!
@@daanvanvuuren4877 I didn't check the power consumption, but 15A seems to be odd. Approximately 30 percent of LEDs are lit at the same time and not at full brightness. Of course, if you turn on all LEDs, "RGB" it can and will consume more. For this project, I do not think it makes sense to put a more powerful power supply than 5 amps.
I will never understand why something like the LaMetric is so expensive at ~250€, while the components themselves are less than 30-50 depending where you order. Of course software costs too, but for what they offer it's a joke tbh...
I love this project and might just build my own this way! I love that I can control everything on it this way :)
I think the majority of the cost is plastic housing :)
You mean 3-5 dollar
Awesome. Got my next project to work on. Thanks for sharing. ✌️
Hi, glad you liked it.
Hello! What power adapter is needed? 5V? How many Amps?
Place fix wiring diagram on github uts broken, Thank you!
HI, if you will not turn on all LEDs at 100 percent brightness, 5v 2-3.5 amp is enught. Wiring diagram "Connection Diagram.jpg" is ok.
very well explained, thanks! I have made it without any problem. I also print the diffuser for leds and it works great. next time I will try to make with the speaker
I'm very glad! that everything worked out
This is excellent work, and something I intend to attempt to build in the coming weeks, thanks for your efforts. One thing I am puzzled about is how you bonded the 3 parts of the led diffuser ?
Thank you, I used fine double-sided ~0.2mm transparent tape.
@@PricelessToolkit thank you
@@lee-he3ey Searsh "Ulanzi TC001" its a ready made device
Thanks for the Video. Love the project. Got a lot to learn using it in Home Assistant- Node Red.
You are welcome!
Hi from LA! Thanks so much for making this video! About how much did it cost for you to 3D print the case you and grid ?
yes, I printed the case and the grid in 2 parts and then glued them together. I don't remember the cost for all, but for now, it is not worth all the hassle, you can buy a ready-made device not that expensive (DIY cost + 20$).
2:33 Flash Work but find not Pixel it🤔
So it means is not flashed correctly or esp not booting up.
@@PricelessToolkit Flash Complete nor Error....
@@MasterChief.117 you r using the new online flasher?
Excellent
Which home assistant you are using
Thanks
Hi and thanks i'am using "Home Assistant"
I followed all the steps. Flash is successful. However, when I connect to the web interface (IP of the ESP device), it appears as "Connectionm: Ooffline". I can't access anywhere in the Dashboard or other selections. I did the experiments with 2 d1 mini and 2 Nodemcu. The result is the same.
I'm open to your advice.
Thank you.
Hi, the firmware isn't my project, so I'm not informed about any recent changes in the latest version. I recommend posting your issue on the official forum.
The links (to the wiki and the LED matrix) are dead
Updated! Thank you very much! and Happy New Year
@@PricelessToolkit Have a great 2024!
Hi
Like so much your projects. Great work.
Can you tell me what speaker did you use the case mount?
Hi and Thanks!!!, back cover is not my design so I can't say anything about speaker size. You can search in Thingiverse, there are many variations of this case.
@@PricelessToolkit can you give me the name of the maker ou the link so I can see what speaker did I put on?
Hi, I have Awtrix with wemos D1 but hate the fact I need to keep my pc on all the time as host (I know I have to get a raspberry)
Can I use this project as stand along clock without the need to keep on the pc as a host?
Hi, 1) Don't buy raspberry pi, instead, get a Small form factor pc like HP T620 - 45-50 euro 2) Try shutting down your computer and check, if Awtrix have wifi connection, in theory, it will work "I didn't check so I don't know"
Hi, what kind of speaker would you use for that? I would also like to install a speaker :)
Hi, Mini speaker 8ohms 2W s.click.aliexpress.com/e/_DEZGB43
@@PricelessToolkit thanks! oh, btw. very nice tutorial! :)
@@zigajamnik Thanks for appreciating
🔥🔥🔥
Thanks for sharing your project.. I would like to display an attribute like the instant energy consumption, can you help me on how to set it up with nodered? Thanks
Hi, instant like if there is a difference between consumption 2 seconds ago and right now ?
@@PricelessToolkit no just show the value! Or maybe also the current temperature! Thanks
@@diegoruggiero2315 Can you transfer your question to my Facebook group page?
@@PricelessToolkit sure.. let me find the page then 😅
is it going to work with ESP32, not D1?
The official documentation says nothing about ESP32 "pixelit-project.github.io/hardware.html " Unfortunately, I haven't tried it either.
Thank you for your video! Could you tell me how to add or set up "Flow" for Instagram (visible in your video) and the price of bitcoin?
Hi, I am not using it. Example "github.com/pixelit-project/PixelIt/discussions/26"
@@PricelessToolkit I tried to add it, but I can't run it so it would work. I don't know how to connect it so that it works. I probably have little knowledge for this :((
I tried flow from the link but it not working. Instagram API is closed.
@@PricelessToolkit Thank you for your support, I made sure it doesn't work.
Thank you for this tutorial. Please share the link for the 3d case you use in this video. Thank you
Hi. My Github link in to description
Thank you
Hi. Can you provide stl file without speaker holes or hanging holes on the back cover. Just to save printing cost.
Hi. Unfortunately, I don't have these files. All files that I have are in GitHub. Search on Thingiverse, I think there you will find almost identical cases.
Is the pixelit a particular product or just a pixel matrix? I can’t find anything on pixelit
Hi Travis, link in the video description "Official wiki"
What kind of power supply are you using? How many amps?
power supply 2 Ah . in normal usage, when not all led is powered. it uses 1.2 Ah . but for this matrix, 3 ampere power supply is advised
great video love it!
Thanks !!
Inspired by LaMetric Time
воне мильметр :D
Прости не понял.