Super price for Hubsan H501s Advanced. 👉 bit.ly/2mlZjDE Good opportunity. Best Price on DJI SPARK here 👉 bit.ly/2sOFPeP Sale at AOSENMA CG035 👉 bit.ly/2fmi2x0 Offer on dron GPS BAYANGTOYS X16 👉 bit.ly/2ssrQbS (Use the codes rc18off or rc15off) New section with special discounts in RC: 👉 bit.ly/2mPuQjc Regards! Take a look :) greetings
yehaaa ,, i aagree brother , i was just lazy to design the part , ahaah,, was just for test,, i will finish doing that for sure. thanks for tune in dude. agretting
xD buenoo no se yo si tanto ahaa,, pero no esta mal para costar 22urillos el coche, con esta modificacion ahora va muchisimoo mejor para trepar por los sitios, le hacia falta algo asi. saludos
Thanks for the great video. I followed the exact same procedure with my crawler, same model as this...but I think my ESC is defective. I bought the same one as you, it has forward/reverse/brake. However, when I connect the ESC to power, the motor always runs. It will slow down and speed up when I press the trigger on the Tx, but it won't stop/go to neutral or reverse. I've tried everything I can think of to recalibrate this ESC but nothing seems to work. Yours just seemed to work right from the start, mine just accelerates forward as soon as the ESC gets power. Is there a calibration or reset procedure for these cheap ESCs, or did I get a defective one?The steering servo works perfectly so everything is bound properly. I'm confused. Thanks.
aaaha, Thanks Flash Hobbies, well awesomee may be is to much for this little 22€ truck xDDD but the true is i was missing loot the progresive throthle.. just make soo much hard to perfom.. naw looks working pretty nice,, need to design one nice support for the front servo and 3D print it.. a greeting friend and thanks for tune in.
Cool video brother. I have one of these crawlers myself. Where did you buy the esc and transmitter from? Also the servo as well. I would like to upgrade my crawler too. Thank you my friend.
hi friend, thanks for your message, here you have the parts i have used on that mod. ESC i have used: 👉 bit.ly/2nbnfba FS - Gt3c Transmitter : 👉 bit.ly/2dbWClR Extra Reciver (waterproof) 👉 bit.ly/2hvrZqy HB 👉 bit.ly/2e9WMIs battery spare 👉 bit.ly/2eb9EQm a greeting
Hi friend Евгений Пестерев, the truck goes awesome with this update. The ESC i have used is this one bit.ly/2jlzsH7 , but looks it is outofstock. HAve a look in here , there is a lot of other ESC aviables bit.ly/2kA0HyR . A gretting
Great Idea. OI might get one of these cheapo crawlers just to do this mod. Do you think the stock motors can handle a bigger voltage , ex 6V ? I know most ESC's can . I bet it would give it more torque
Hi friend Joseph , this car is great for mod it, soo fun to play, the motors will handle with not problem a bigger ESC, but the original ESC probably not. i recomend you to replace it with a better one. here you have all the parts i use on my mod. ESC i have used: 👉 bit.ly/2nbnfba FS - Gt3c Transmitter : 👉 bit.ly/2dbWClR Extra Reciver (waterproof) 👉 bit.ly/2hvrZqy HB 👉 bit.ly/2e9WMIs battery spare 👉 bit.ly/2eb9EQm greetings
haa ok, then, with out replacing the electronics, it will be a bit more bad, becouse the direcion is not proportional , and this is a crucial point for have a good experience. Also the esc proportional is important for be acurate. then i thinkif you just put more voltage with abigger battery it will damage the electronics it have from sotck
no friend, for use the proportional servo and esc, you need to trplace the reciver for control. in description i have a list of all electronics used in my mod. a greeting
THanks friend Torro ́s RC Channel , im soo happy witht he resoult, This car definitely needed this modification. Now it does not look the same. hope this weekend I can take it for a ride to prove it: P
Hola que tal!... tu me podrias decir las mejoras que se obtienen al hacerle esta modificacion?...tengo uno de los mismos y me gustaria modificarlo tambien...saludos! Atento a la reapuesta gracias
no compañero , para tener control porporcional , has de cambiar la emisora y el receptor, yo uso esta ( que a viene con su receptor incluido) , y ademas puedes programarle como 10 receptores mas. FS - Gt3c Radio + receptor : 👉 bit.ly/2dbWClR Receptor extra (waterproof) 👉 bit.ly/2hvrZqy saludos
mmm,, im not sure of that.. fro long looks like yes,, but from fat , not shure, may be some mm to cose it up. THebattery it have is a 4,8v , then one of the 14500 is not enough and 2 will be too much volage,, not sure is fhis is gona work. a greeting
There motors for 3-6 volts, Li-ion 3-4.2 volts, www.gearbest.com/rc-car-parts/pp_503424.html Four Li-ion batteries will give 2800 мА) Can be set DC Step Up Converter Module, Will keep 5 volts
hi sayan lodh , the remote i use is this one bit.ly/2dbWClR , i use it also for my ft011 rc boat and some other rcs, works relly nice ,, The controller come with one reciver, but if you need more recivers they are soo cheap, i use this ones bit.ly/2hvrZqy , hope this helps, a greeting
Hi Melwin Mathew John, THanks for the coment friend, hope you can doit easy for you. I have not replace the motors never at moment. but i know if they broke it is posible. a greeting
Go into multiple rc stores and test fit it. Mount it yourself with plastic tubes and/or double sided tape. I’m trying to do the same but I don’t wanna take my toy grade into rc shops imma get laughed at.
hi friend, yes it incrase a bit the power,, dont know a % exacly , but wiht this new esc i can guive it a bit more than the normal 4.8v what will make it more power full.
si se podria hacer aprueba de agua (dulce) , metiendo directamente partes electronicas aprueba de agua , o haciendo algun invento , sellando todo bien. Soy de españa amigo. jeje Nunca estuve en america, pero no me importatia visitar esos lares. Un saludo y muuuchas gracias por pasarte y comentar
pues como todo , es lo que uno se quiera gastar.. con 2 euros (comprando silicona de esta de baños en los xinos) ya podrias xDD .. hastaa no se,, 50euros ??? comprando electronica waterproff.. aunque para este coche, quizas mejor hacer la chapu de la silicona y se se acaba rompiendo con 50euros pudes comprar 2 coches mas xDD saludos
Ruudy L!! you alive! ahahaha,, ok bro, but naw is working much much better,, i was missing a lot the proportionalr trothle. Hope all is going well on your side.. a grertting
why is it every time I see a video of someone converting the steering on these rock crawlers they always seem to make a real botch job of it. that plate to hold the servo looks like a three year old made it.
Maybe because not everyone has the possibility of doing a "great job"? It's good that there are more options out there for all those people. Although it is not to your liking, is the reality we have. Obviously, you have written your comment without first bothering to look at my other videos. I know it's easier to complain, than to do something useful for the community. (As an example you can take your channel .. I see that you only use it to complain to others instead of providing things with value for others.) Well, it does not matter .. As a courtesy, here you have another video in which "if you have the right things" the result is more beautiful. (although it does the same service) th-cam.com/video/RYUwoBl4mFM/w-d-xo.html. I hope you like it.
Helow friend, Has you know this unit have nor proportional speed or direction with the original ESC, if you replace it like me, i belive is not posible use the controller that come with the car, you need to use a reciver for control the new servo and the new esc. But afeter change this, the car have proportion direction , and speed, also naw i have breack for stop. you have links of all the component in the description. a gretting
Super price for Hubsan H501s Advanced. 👉 bit.ly/2mlZjDE Good opportunity.
Best Price on DJI SPARK here 👉 bit.ly/2sOFPeP
Sale at AOSENMA CG035 👉 bit.ly/2fmi2x0
Offer on dron GPS BAYANGTOYS X16 👉 bit.ly/2ssrQbS
(Use the codes rc18off or rc15off)
New section with special discounts in RC: 👉 bit.ly/2mPuQjc Regards! Take a look :) greetings
It's nice to see someone who does their wiring the right way.
:) thanks lots friend Jesse Stebbins , really apreciate it. a greeting
Why do my wheels keep spinning when i tried to connect them both to the esc even when the esc is turned off??
I like that back music
Very nice crawler! 👍
thanks brother MAX Game
Awesome mod you need to 3d print that box at the front instead of melted plastic
yehaaa ,, i aagree brother , i was just lazy to design the part , ahaah,, was just for test,, i will finish doing that for sure. thanks for tune in dude. agretting
esta genial compañero eres un crack
xD buenoo no se yo si tanto ahaa,, pero no esta mal para costar 22urillos el coche, con esta modificacion ahora va muchisimoo mejor para trepar por los sitios, le hacia falta algo asi. saludos
Great Idea too make it perform better. Thats whats so fun with Rc's too make them your own! Nice video big thumbs up!
thanks loots friend, much much better with this imprvements , sso happy with ,, agretting friend
Great mini crawler , excellent video !!
thanks sator rotas, is performing much much better naw :)
Please give a link for the servo, and maybe for more powerful motors. Very nice video, going to try it
hi friend, you can find links of all other parts in my other WLP videos, are pretty the same, a greeting
Thanks for the great video. I followed the exact same procedure with my crawler, same model as this...but I think my ESC is defective. I bought the same one as you, it has forward/reverse/brake. However, when I connect the ESC to power, the motor always runs. It will slow down and speed up when I press the trigger on the Tx, but it won't stop/go to neutral or reverse. I've tried everything I can think of to recalibrate this ESC but nothing seems to work. Yours just seemed to work right from the start, mine just accelerates forward as soon as the ESC gets power. Is there a calibration or reset procedure for these cheap ESCs, or did I get a defective one?The steering servo works perfectly so everything is bound properly. I'm confused. Thanks.
интересное видео
thanks friend Liberman
👍
thanks for stop by songoland dude!
Muy buena adaptacion makina, ganara mucho el bichin siendo progresivo en direccion y gas, un saludo
gracias por comentar Aeromike12, la verdad que es lo que le faltaba a este peque para trepar como un champion! ehhehe muy contento con el mod Saludos
hell yeah man you just pimp that bad boy out bro that was really cool man you got mad skills that is going to perform way way better good job man
:) , yeah brother Roy Nelson, eejee has you sey naw is much better, can wait to the weekeng to test it,, hope the weather will be ok.. a gretting
Oh yeah brother this was a damn good upgrades you overhauled this bad boy I hope the weekend is good for you too brother you deserve it man
THanks bro! i test it a bit inside home, and looks workgin good the invention. ejee will see, :P ,, have a good day boss
Yeah that's awesome brother you have a good day bro no better than that have a kick-ass day brother LOL
awesome project
aaaha, Thanks Flash Hobbies, well awesomee may be is to much for this little 22€ truck xDDD but the true is i was missing loot the progresive throthle.. just make soo much hard to perfom.. naw looks working pretty nice,, need to design one nice support for the front servo and 3D print it.. a greeting friend and thanks for tune in.
Do you know what kind of engine uses the front wheels? I think mine is broken 😕
Sir.
Can u tell me one thing
to controller u have used is sold out
Now what controller should I use for same
Nice modification brother, I just been looking at these on website at local stores, very cheap crawler $29 Aus dollars
yes man, chap and fun one! thanks for tune in and chek older videos,, really means lot for me. a greeting
@@NoisyKayakAdventures Bro can i use another transmitter and reciever
Is this waterproof
Cool video brother. I have one of these crawlers myself. Where did you buy the esc and transmitter from? Also the servo as well. I would like to upgrade my crawler too. Thank you my friend.
hi friend, thanks for your message, here you have the parts i have used on that mod.
ESC i have used: 👉 bit.ly/2nbnfba
FS - Gt3c Transmitter : 👉 bit.ly/2dbWClR
Extra Reciver (waterproof) 👉 bit.ly/2hvrZqy
HB 👉 bit.ly/2e9WMIs
battery spare 👉 bit.ly/2eb9EQm
a greeting
SongoLand Thank you so much for the information my friend.
:) you are welcome freind
Nice one :)
Keep it up with great job...
Have a great weekend :)
thanks for tune in friend
did you use mico servo (sg90) or normal (mg995) can you post a link?
Hi friend , the servo was a standard one. A greeting
Very intresting upgrade. Please give me a link on motor controller. Thanks!
Hi friend Евгений Пестерев, the truck goes awesome with this update. The ESC i have used is this one bit.ly/2jlzsH7 , but looks it is outofstock. HAve a look in here , there is a lot of other ESC aviables bit.ly/2kA0HyR . A gretting
Thank you, I knew what to look for . In Bangood is 6.5 Euro
;) a gretting
after installing ESC can i use the same remote controller which came with car...because u used other one...??
Great video big thumbs up my friend XD
thanks 人 MG :)
Grandisimo video hermano likazo.
Gracias por pasarte compa! me encanta como va ahora!! haber si esta finde puedo grabar algun video chulo.. saludos
Great Idea. OI might get one of these cheapo crawlers just to do this mod. Do you think the stock motors can handle a bigger voltage , ex 6V ? I know most ESC's can . I bet it would give it more torque
Hi friend Joseph , this car is great for mod it, soo fun to play, the motors will handle with not problem a bigger ESC, but the original ESC probably not. i recomend you to replace it with a better one. here you have all the parts i use on my mod.
ESC i have used: 👉 bit.ly/2nbnfba
FS - Gt3c Transmitter : 👉 bit.ly/2dbWClR
Extra Reciver (waterproof) 👉 bit.ly/2hvrZqy
HB 👉 bit.ly/2e9WMIs
battery spare 👉 bit.ly/2eb9EQm
greetings
thanks. that is what I meant with most ESC's. the plan was to change the electronics. Gereat vids. thanks
haa ok, then, with out replacing the electronics, it will be a bit more bad, becouse the direcion is not proportional , and this is a crucial point for have a good experience. Also the esc proportional is important for be acurate. then i thinkif you just put more voltage with abigger battery it will damage the electronics it have from sotck
Can we use the first red conroller after modifying
no friend, for use the proportional servo and esc, you need to trplace the reciver for control. in description i have a list of all electronics used in my mod. a greeting
very cool my friend +👍
THanks loots J Mir :) a gretting
gran video👌 +👍
gracias por pasarte y comentar amigo maxiii , un saludo
I just did similar to a 1/10 scale savage 2 crawler, basically a bigger version of this one
nicee! they are cheap and very fun models one time you mod them a little bit. Thanks for stop by and coment friend
Fantastic Update & Mod and absolut great Build......Big thumbs up my friend 👍👍
THanks friend Torro ́s RC Channel , im soo happy witht he resoult, This car definitely needed this modification. Now it does not look the same. hope this weekend I can take it for a ride to prove it: P
Evan tho i dident understand alot of the stuff h were saying because im a new person here but great video keep the great work up
Whataguy 21! thanks lots friend. and welcome to songoland. a greeting
Sir u not use the fan for the esc sir?
hi friend, nop , i dont use it , and i think is not need,
Very good video. 👍
What the servo used?
Hola que tal!... tu me podrias decir las mejoras que se obtienen al hacerle esta modificacion?...tengo uno de los mismos y me gustaria modificarlo tambien...saludos! Atento a la reapuesta gracias
hola, las mejoras son muy notabes,, direccion proporcional , un poco mas de potencia y tambien gas proporcional y freno. saludos
SongoLand ...gas proporcional te refieres a que la velocidad se puede regular?.saludos
exactamente a eso amigo, saludos
SongoLand y con el control remoto?...el original no sirve?..hay que comprar uno nuevo?...saludos
no compañero , para tener control porporcional , has de cambiar la emisora y el receptor, yo uso esta ( que a viene con su receptor incluido) , y ademas puedes programarle como 10 receptores mas.
FS - Gt3c Radio + receptor : 👉 bit.ly/2dbWClR
Receptor extra (waterproof) 👉 bit.ly/2hvrZqy
saludos
The battery li-ion format 14500 will fit in there ?
mmm,, im not sure of that.. fro long looks like yes,, but from fat , not shure, may be some mm to cose it up. THebattery it have is a 4,8v , then one of the 14500 is not enough and 2 will be too much volage,, not sure is fhis is gona work. a greeting
There motors for 3-6 volts, Li-ion 3-4.2 volts, www.gearbest.com/rc-car-parts/pp_503424.html Four Li-ion batteries will give 2800 мА) Can be set DC Step Up Converter Module, Will keep 5 volts
Hola, que serbo has usado? Gracias
HOla es un TowarPro standar si no recuerdo mal , saludos
From where you got the remote???
hi sayan lodh , the remote i use is this one bit.ly/2dbWClR , i use it also for my ft011 rc boat and some other rcs, works relly nice ,, The controller come with one reciver, but if you need more recivers they are soo cheap, i use this ones bit.ly/2hvrZqy , hope this helps, a greeting
u just made the exact video that I wanted, thnx bro.
is it also possible to change the motors??
Hi Melwin Mathew John, THanks for the coment friend, hope you can doit easy for you. I have not replace the motors never at moment. but i know if they broke it is posible. a greeting
thnx man
:)
Sir can i know where is the main switch wire
easy to find friend, take the 4 screws of, and you will find all the little electronics on ther. a greeting
What's the max speed
very nice video , like
THanks my friend :) , have a happy weekend
Hey friend can I get the list of the things you used
hi friend :) , thanks for comenting,, sure,, you have a ll the list on description box of the video. a greeting
awesome mods.. what esc you used on this RC?
hi friend Bob Rock i have used this model of Esc bit.ly/2nbnfba a greeting
nice.. thanks for the info bro :)
you are welcome buddy :) i just see is out of stock ,, but at end you can have an idea there are some similar ones in there. a greeting
Genial video compi! Te deseo un feliz dia. mi like por aqui. Un saludo! :D
Gracias amigo Juanfri Magic :) que tengas buen dia por alli tambien! un slaudo y gracias por comentar
what a body posible to change for same scale
hi friend, your imagination is the limit. you can use any cheap china sotre car for improve. easy. a greeting
Go into multiple rc stores and test fit it. Mount it yourself with plastic tubes and/or double sided tape. I’m trying to do the same but I don’t wanna take my toy grade into rc shops imma get laughed at.
Does it increase the power of the car ?
If yes by how much (in percentage) Please answer my question
hi friend, yes it incrase a bit the power,, dont know a % exacly , but wiht this new esc i can guive it a bit more than the normal 4.8v what will make it more power full.
is the car made in india
i think is made in china friend
what servo is this?
is a normal servo. "standard"
yes but any other controllers
no problem on this, just install the reciver and transmitter you preffer, a greeting
nice mod!
:) thanks dude
cool bro
Puedes hacerlo a prueba del agua y de donde eres suenas puertoriqueño
si se podria hacer aprueba de agua (dulce) , metiendo directamente partes electronicas aprueba de agua , o haciendo algun invento , sellando todo bien. Soy de españa amigo. jeje Nunca estuve en america, pero no me importatia visitar esos lares. Un saludo y muuuchas gracias por pasarte y comentar
SongoLand denada amigo cuanto contaria aproximadamente hacerlo aprueba de agua
pues como todo , es lo que uno se quiera gastar.. con 2 euros (comprando silicona de esta de baños en los xinos) ya podrias xDD .. hastaa no se,, 50euros ??? comprando electronica waterproff.. aunque para este coche, quizas mejor hacer la chapu de la silicona y se se acaba rompiendo con 50euros pudes comprar 2 coches mas xDD saludos
can you use a diferend controler pls
yes friend , you can use the controller you like
gan kalau ugret servo rock HB pake servo ukuran brapa
my one is standart servo friend Lie Zand
plz list the items u used
all list of items is on descriprion Shylesh A , , hope that helps.
a greeting
👍👌❤️Hello my dear friend! Love your channel and videos!👍👌 I Subbed and liked! Have a wonderful day!😙😙😙
THanks loots friend. and welcome to sonogland
Can you please change the motors and make a video
hi friend, i have not in mind to make this mod yet. but if one day i doit , i will make a video for you , a greeting
very nice big like
thanks friend Electrical_Dynamo , a gretting
nice
;) thanks friend
ซื้อมาจากไหน
จากเพื่อนชาวสเปน
Any chance you could n
Send me the parts for mine
Likazooo brooo
gracias compa!
Nice update, but I will leave mine standerd for now greetings :-)
Ruudy L!! you alive! ahahaha,, ok bro, but naw is working much much better,, i was missing a lot the proportionalr trothle. Hope all is going well on your side.. a grertting
i salute you
:) saludos my friend
like makina
gracias por comentar sergiopepeone, un saludo
I too have the same
hi Jazz , is a great one, and soo fun!
thank god..you did not use glue gun.
RC MAКER ;-)
ツ I am extremely glad that you are always with us ツ ✔ ★★★★★★★★★ Our like # 15
Cool video, dear friend Like13
thanks loots for tune in brother Josepher Sobrevivente
Same as mine
It's not going as fast in the road
nop friend, this is a slow car. nice for crawling. a greeting
Bhai Rs btaya karo
thanks friend
Compro tus carros cuanto
hola Miguel Rico, yo no vendo coches, pero en la descripcion de cada video tienes links a los modelos. Son baratos. saludos
came on pls
why is it every time I see a video of someone converting the steering on these rock crawlers they always seem to make a real botch job of it. that plate to hold the servo looks like a three year old made it.
Maybe because not everyone has the possibility of doing a "great job"? It's good that there are more options out there for all those people. Although it is not to your liking, is the reality we have.
Obviously, you have written your comment without first bothering to look at my other videos. I know it's easier to complain, than to do something useful for the community. (As an example you can take your channel .. I see that you only use it to complain to others instead of providing things with value for others.) Well, it does not matter ..
As a courtesy, here you have another video in which "if you have the right things" the result is more beautiful. (although it does the same service) th-cam.com/video/RYUwoBl4mFM/w-d-xo.html. I hope you like it.
after installing ESC can i use the same remote controller which came with car...because u used other one...??
Helow friend, Has you know this unit have nor proportional speed or direction with the original ESC, if you replace it like me, i belive is not posible use the controller that come with the car, you need to use a reciver for control the new servo and the new esc. But afeter change this, the car have proportion direction , and speed, also naw i have breack for stop. you have links of all the component in the description. a gretting
what model servo is that?
hi, is a standard servo. NOthing special. a greeting
nice
THanks dude!