Ideal para poner pequeñas velas, en colgantes o mesas de arrimo, etc. Reciclaje óptimo para realizar por niños y adultos. Muchas gracias. Bendiciones. Vicky-Chile. 🤗👍🧙♀️👌🤗♥️🇨🇱♥️
Very nice. If you make 3 of them you can have 2 spinning in one direction and the middle one in the other direction. I don't fold my edges. I tape them together with clear tape and then staple them.
several people asked how to attach the strips to each other. I tried to paste pictures in my comment, but was unsuccessful. Hope this helps. Use the pliers to fold over the end of each spoke (about 1/4" will do). Flatten each fold slightly. Overlap the end of a spoke from one can with the end of a spoke from the second cannot a 90 degree angle. Slide the corners together (figure 2). Holding firmly with the fingers of one hand, use the pliers to bend the corner over (figures 3 and 4). Use the pliers to crimp the folded corner down tight making a triangle fold. Moving up to the next spoke on each can, overlap the ends and then bend and crimp down the corner just like you did above. Repeat the process all the way around until all the spokes of one can are joined to the spokes of the other.
Please help! Great idea. Got the soda cans prepared, now need to get them together. Did you glue the beads on? In between spinners how did you keep beads from touching each other?
I love these but for us beginners it would be nice if you would show all the steps like how you bent the ends to hold them together and how long of wire you used to string them and how you strung them with the beads to hold them together. I am sorry but I didn't get much out of your tutorial. Maybe you could go back and do it a little better for those of us who have never worked with cans.
This looks great but you didn't teach anything except how too cut the cans. How did you fasten the cans together after you overlapped the pieces? How do you attach the beads so that nothing slides down the wire?
your wind spinners are nice. you went step by step until you got to point of putting cans together. you mentioned that you "just fold them" but how?????? then even when you tried to be helpful you said something about crossing them and folding but they didn't stay. I have all these can cut up but can't figure out how to fold them together.please help!!
Bonjour et bravo ;0) funny how people need to be ''feeded''! If you don't explain how to use scissors how to bend with 10 pictures they are lost! Don't know why they don't try to use their brain!!!! ;0)
The fan blades cut out of cans all have raw cut metal edges. I heard a child's voice in the video, wouldn't like to Think what damage could be done to little hands and fingers if they got hold of these raw edges ?
![[UNCUT]"ตุลามรณะ"ย้อนฟังคำทำนาย หมอดูทุกสาย ดวงเมืองร้อน (หมอปลาย ฟองสนาน อ.โอเล่)I คนดังนั่งเคลียร์](http://i.ytimg.com/vi/lE5az5VvT9M/mqdefault.jpg)
This is amazing! You should do more! You are very creative!
Can you please show the whole video on how to make these, how do you keep the spinners not to touch each other. Awesome work
I'm always looking for something new in wind power amusement , I think what you have is a great idea and I thank you for making this video .
absolutely loove it- fantastic idea for recycling, would look lovely too maybe if sprayed and glitzed up , but beautiful windchime well done you x
I like this
But it would b nice to see how you actually made them
Thank you for sharing. I love it and I’m going to make them for my yard🥰
These are really cute BUT I wanted to actually watch the step by step tutorial process. I’m still completely clueless how you did it.
Ideal para poner pequeñas velas, en colgantes o mesas de arrimo, etc. Reciclaje óptimo para realizar por niños y adultos. Muchas gracias. Bendiciones. Vicky-Chile. 🤗👍🧙♀️👌🤗♥️🇨🇱♥️
Excellent job art work
Adorei achei super maravilhoso pena q o video deixa a desejarem alguns detalhes
Wow! That is so cool! Thanks for sharing!
I'd really like to make larger versions of this with my powerimig welder. I love how these turned out.
I love this one!!!!
Good Job. Very inventive.
Having problem folding/overlapping spinners. Could we get a more detailed video? Thanks
You are a genious so very beautiful love it
Beautiful, wil try one ,thks dear . Hope to see more ideas. Love u
I love this original 💡
Very nice. If you make 3 of them you can have 2 spinning in one direction and the middle one in the other direction. I don't fold my edges. I tape them together with clear tape and then staple them.
i love your spinner this is jeneice from the bahamas
Easy way to do it is make x the overlap each one and then the top corner bind it again so it will hold better. Hope that helps.
OUTSTANDING
Excellent job love it keep it up!!!!!
several people asked how to attach the strips to each other. I tried to paste pictures in my comment, but was unsuccessful. Hope this helps. Use the pliers to fold over the end of each spoke (about 1/4" will do). Flatten each fold slightly. Overlap the end of a spoke from one can with the end of a spoke from the second cannot a 90 degree angle. Slide the corners together (figure 2). Holding firmly with the fingers of one hand, use the pliers to bend the corner over (figures 3 and 4). Use the pliers to crimp the folded corner down tight making a triangle fold. Moving up to the next spoke on each can, overlap the ends and then bend and crimp down the corner just like you did above. Repeat the process all the way around until all the spokes of one can are joined to the spokes of the other.
Really Cool! Thanks Bebe
Please help! Great idea. Got the soda cans prepared, now need to get them together.
Did you glue the beads on? In between spinners how did you keep beads from touching each other?
Amazing super... 👏👏👏👏
wow, sorry with possible faults i dont know speak and write in english very well, but would be nice if u cut the can for us see
very nice, but it's a spinner, not a wind chime.
Very creative. It's very good.
Thanks
i would have like to see how you cut those and I think you need gloves on when handling these
how cool love it
Thank you!!I got it now!!!
Very nice
Does it look better to use the larger cans than the regular 12 oz? Thank you.
You can use 12oz cans if you want doesn't really make a different
love it!
Cool thank you
How do you put the blades together like folding the metal ? Thanks
It is good if you use tripod, as my suggestion
I love these but for us beginners it would be nice if you would show all the steps like how you bent the ends to hold them together and how long of wire you used to string them and how you strung them with the beads to hold them together. I am sorry but I didn't get much out of your tutorial. Maybe you could go back and do it a little better for those of us who have never worked with cans.
Nancy Vastine when you bend them just over lap it and as for the wire make it as long and as short as you want.
Nancy Vastine boring 💤 to even watch ⌚
Let us hear the chime.
Excellent very impressed...
very nice, thank you for sharing
Super!
In between spinners how did you keep beads from touching each other?
Did not explain all details into constructing these
This looks great but you didn't teach anything except how too cut the cans. How did you fasten the cans together after you overlapped the pieces? How do you attach the beads so that nothing slides down the wire?
your wind spinners are nice. you went step by step until you got to point of putting cans together. you mentioned that you "just fold them" but how?????? then even when you tried to be helpful you said something about crossing them and folding but they didn't stay. I have all these can cut up but can't figure out how to fold them together.please help!!
Make and X then bend them together and then just the tip to secure it.
I don't fold mine. I hold them together with a bit of clear tape and then staple them. Works great for me.
Karen Anderson I added glue to mine and they did stay together. Fold the corners together and add glue.
I got It , thanks
Bonjour et bravo ;0) funny how people need to be ''feeded''! If you don't explain how to use scissors how to bend with 10 pictures they are lost! Don't know why they don't try to use their brain!!!! ;0)
Yes, we need to fill in the blanks ourselves,no problem figuring things out 👌😂
Nice project, but the video would have been better had you showed all the steps.
How do you bend the corners. and the beads.Thank you.
How you over lap it together
How did you fold them?
Wow
The fan blades cut out of cans all have raw cut metal edges. I heard a child's voice in the video, wouldn't like to Think what damage could be done to little hands and fingers if they got hold of these raw edges ?
General directions are ok BUT need all the steps ..folding the edges and attaching everything together ..so all in all not enough visuals!!!
It doesn’t look like rocket science, so just use your own imagination.
what was the holes for at the end of them
Kathy Goins to spin
silly kool nice
Which part of wind "chime" did you not understand?
Would be nice if you showed step by step
You didn't show how to fold lol
thanks bebe
you said 7 how wide is the one cut into 7 then into 14
You did not actually show how to join the two halves of the cans together ~ would like to see you actually doing this please!!
How the heck did you cut them seriously!!!!
my can is 8 1/2 how do you get 7 out
Where are the chimes?
Ummmmm.....where's the glue and screw come in........
That's NOT a wind chime. Wind chimes chime in the wind. That's creative though.
What Wrong She It Is Not Spinning
mobile not chime
Cool but not a wind chime
This is so irritating!!!!
get a tripod so you can show us what you are doing and s the camera doesn't giggle. King of a junky looking spinner too.
This sucks...................
Where are the chimes?