Totally fixed our problem! Pretty weird that this error code is ment for a different problem, after some googling I read more about how the lock would probably be the problem. Simple youtube search got me to this video and we got to fix the washer ourselves in relatively no-time because of the clear guidance of this video! Thanks
Iam Glad we could help you. My Ebay Shop rover.ebay.com/rover/1/710-53481-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fstr%2Fhowtorepair&campid=5338676951&toolid=20008 If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel th-cam.com/users/Apart4u Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. TH-cam. th-cam.com/users/Apart4u Facebook. facebook.com/how.to.repair.appliances
At 2:50 you showed how to remove the door lock. This showed me that the problem I had with my machine was that the door lock mechanism was loose. Error message was "Door open?". I just had to reverse what you did and put it back in place and the machine was working again so thanks a lot for making this video! I previously had to repair a broken piece of plastic inside the door with some screws and also found the solution to that problem here on youtube. The latter is by the way a very common fault on these machines and must be classified as a design flaw.
Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks, Paul 👍
Thank you for this video, replaced part but no reset so thanks to your instructions we have saved a new washer purchase, and I have bragging rights over my hubby for finding your video and sorting it (which is priceless in itself) Thanks again.
My contribution to humanity: I've been fighting with E61 on my Bosch. At the same time, our Bosch dishwasher was also playing up, repeatedly switching on the cutting out as it tried to move on the cycle. It was only when we tried to reheat pizza in the microwave and it was all lights and no action that I discovered that the wall socket was giving out reduced power. I ran an extension cable from a known good socket and the washing machine ran with no issues. Why reduced power should have resulted in a door lock error I've no suggestion, but it's obviously something to check before expensive callouts and/or replacement parts and machines. Hope it helps
Glad we were able to help @epd1351 please remember to subscribe to our channel as that really helps us th-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
Iam Glad we could help you Please remember to subscribe to our channel th-cam.com/users/Apart4u Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. TH-cam. th-cam.com/users/Apart4u Facebook. facebook.com/how.to.repair.appliances
Thank you. This video let me fix my washing machine for the price of the part. (which I ordered from your website as you deserve to get earn something for this useful resource.
Hi, I have a Siemens S1 14.44 Total Textile Management Washing Machine and it has tripped the power on several of our appliances. I have switched the trip switch back on and an error code F34 is displayed with a bleeping noise. I have watched your video about how to replace the faulty door lock which this error indicates however I am not sure if there is another issue as the power is tripping. The door did actually open. Any suggestions please, thanks.
Thanks for the video You are awesome My machine is exactly the same as in this video. I get E00 error code. After doing what you've told the machine started working but now it has an alarm sound kind of repeatedly while it is working and the speed perfect button's light goes on and off. When I press the button for a time or two then comes the same error again and I have to go through the process again I will appreciate it very much if you give me a tip Thanks 🙏🏽
glad we could help you @alialrubarma this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
Iam Glad we could help you. My Ebay Shop rover.ebay.com/rover/1/710-53481-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fstr%2Fhowtorepair&campid=5338676951&toolid=20008 If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel th-cam.com/users/Apart4u Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. TH-cam. th-cam.com/users/Apart4u Facebook. facebook.com/how.to.repair.appliances
This is not uncommon to have two pressure switches on the machine They all just set the different levels of water Iam Glad we could help you Please remember to subscribe to our channel th-cam.com/users/Apart4u Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. TH-cam. th-cam.com/users/Apart4u Facebook. facebook.com/how.to.repair.appliances
Iam glad we could help Please remember to subscribe to our channel th-cam.com/users/Apart4u Remember to Shop with www.how-to-repair.com and it would help us by posting the video or the website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. TH-cam. th-cam.com/users/Apart4u Facebook. facebook.com/how.to.repair.appliances
Iam Glad we could help you Please remember to subscribe to our channel th-cam.com/users/Apart4u Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Iam Glad we could help you. If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel th-cam.com/users/Apart4u Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. TH-cam. th-cam.com/users/Apart4u Facebook. facebook.com/how.to.repair.appliances
Hello, I followed your instructions on how to replace the doorlock and it worked perfectly for over a month but now the E61 error has appeared again. Do you think I should replace it again or could it be something else? Thankyou
If you already replaced the lock with a new one, this is more likely to be a different type of fault, but without having the machine in front to me, I can't be 100% sure @NR-er6xh please remember to subscribe to our channel as that really helps us th-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
Hi, I have washer / dryer wkd28540eu/01 which triggers E01. When press start it pumps for 10-20 seconds and after that error comes up... Please some advice (float switch measured and ok, level switch measured and ok) EDIT: It was due fck...ng cable!
Hello, could you help me with my washing machine problem? I have AEG L64840l model and what i was figure out that showing E42 in service mode so i suspect that is problem with door lock. Once was E68. Or can be even with mother board? Washing machine has start to stoping during the program and i have notice that the doors are opened. Beside that also when should program be done, still showin 1 minute till the end. I have clean the heater, water suply and water pump with the help of your great videos so kepp going on that way! Thanks!
THANK YOU FOLLOWED INSTRUCTIONS CAREFULLY FIXED F16 PROBLEM JUST LOOSE PIN ON LOCK MOST DIFICULT PART WAS REPLACING WIRE ON DOOR SEAL AND ENSURING THE SEAL REMAINED SECURED TO METAL CASING ON MACHINE
I HAVE AN ERROR F59 IN MY WASHING MACHINE SIEMENS AND MY WASHING MACHINE DONT SPINING INFACT STARTS TO INCREASE SPEED AND STOPS ...WHER DO I CHECK ? THANK YOU...
Can you do us a favour and please share this video on your timeline Facebook twitter etc . This will help other people who can’t get engineers out to help them. th-cam.com/video/rFyGAHVFUW8/w-d-xo.html&t facebook.com/how.to.repair.appliances/ Stay safe
I have seimens iq300 wm10k200gc machine it show a circle error on the left side of display. I did not get any help from internet yet. If you any solution for this error please help me. I am also belongs to electrical and electronics field.
please use our website for questions Can you do us a favour and please share this video on your timeline Facebook twitter etc . This will help other people who can’t get engineers out to help them. th-cam.com/video/rFyGAHVFUW8/w-d-xo.html&t facebook.com/how.to.repair.appliances/ Stay safe
Hi how-2-repair. Thank you for your video. I have a question hoping you ca help me. I have a Bosch machine that is not working since one week. I don't know what is the problem and I don't know if it's an error or a piece of the machine. When I choose a program with the door open and then I close the door, the machine tries to put the lock of the door several times (for about 10 seconds) but then nothing happens. The "start" button flashes and I try to activate it but notihng happens. So I tried to program the machine but this time whit the door closed. Again, we hear that the machine tries to put the lock of the door several times but nothing happens and even worst, if I touch the "start" button during the first 5 second, the circuit breakers leap. I thought that it could be the heater or the interference filter but both are ok. Can you help me please??? I don't know if it's just an error of the circuit (even if I don't have an error code on the display). Thank you very much you for your help.
Jonas Malmgren I have a Siemens and Error „F61“. Was your mashine still working with one Fuse? Mine is working but sometimes crashing. Where is the fuse-Box? Thanks!
Iam Glad we could help you. My Ebay Shop rover.ebay.com/rover/1/710-53481-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fstr%2Fhowtorepair&campid=5338676951&toolid=20008 If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel th-cam.com/users/Apart4u Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. TH-cam. th-cam.com/users/Apart4u Facebook. facebook.com/how.to.repair.appliances
please ask questions at website with full model number Iam Glad we could help you. If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel th-cam.com/users/Apart4u Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. TH-cam. th-cam.com/users/Apart4u Facebook. facebook.com/how.to.repair.appliances
Great Video....already subbed.......i hope you could help me out, i have Siemens WM12 and after repair, the F43 warning comes on. Could you please let me know the procedure for reseting it? Any help will be greatly appreciated. Am desperate, :)
I'm sorry I do not understand the question completely. This looks like your model number but you did not include the make. glad we could help you Δημήτρης Μητσάτσος this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
I take it you're talking about the manufacturers Thank you for leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Totally fixed our problem! Pretty weird that this error code is ment for a different problem, after some googling I read more about how the lock would probably be the problem. Simple youtube search got me to this video and we got to fix the washer ourselves in relatively no-time because of the clear guidance of this video! Thanks
Iam Glad we could help you.
My Ebay Shop rover.ebay.com/rover/1/710-53481-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fstr%2Fhowtorepair&campid=5338676951&toolid=20008
If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel
th-cam.com/users/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
TH-cam. th-cam.com/users/Apart4u
Facebook. facebook.com/how.to.repair.appliances
At 2:50 you showed how to remove the door lock. This showed me that the problem I had with my machine was that the door lock mechanism was loose. Error message was "Door open?". I just had to reverse what you did and put it back in place and the machine was working again so thanks a lot for making this video! I previously had to repair a broken piece of plastic inside the door with some screws and also found the solution to that problem here on youtube. The latter is by the way a very common fault on these machines and must be classified as a design flaw.
Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Thanks, Paul 👍
Thank you for this video, replaced part but no reset so thanks to your instructions we have saved a new washer purchase, and I have bragging rights over my hubby for finding your video and sorting it (which is priceless in itself) Thanks again.
My contribution to humanity: I've been fighting with E61 on my Bosch. At the same time, our Bosch dishwasher was also playing up, repeatedly switching on the cutting out as it tried to move on the cycle. It was only when we tried to reheat pizza in the microwave and it was all lights and no action that I discovered that the wall socket was giving out reduced power. I ran an extension cable from a known good socket and the washing machine ran with no issues. Why reduced power should have resulted in a door lock error I've no suggestion, but it's obviously something to check before expensive callouts and/or replacement parts and machines.
Hope it helps
Super Thanks. You just saved me a bucket of money. Very clear instructions. Thanks again
Thanks heaps for this video...saved me wasting money. Took me 10 mins to do.
Thanks mate! You saved me at least 100€ from the technical service!
Glad we were able to help @epd1351 please remember to subscribe to our channel as that really helps us th-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
@@How-to-repair Sure! one question: where can I buy the doorlock component? (
thanks it really saved my life up in the mountains!
Thanks Buddy, I fixed my washing machine thanks to you:)
Thank you very much for this video, mate! I just fixed my washing machine!!!! YEAH!!!
Iam Glad we could help you
Please remember to subscribe to our channel
th-cam.com/users/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
TH-cam. th-cam.com/users/Apart4u
Facebook. facebook.com/how.to.repair.appliances
Thank you. This video let me fix my washing machine for the price of the part. (which I ordered from your website as you deserve to get earn something for this useful resource.
Glad it helped Thanks please remember to subscribe as that's is was keeps this channel going. Thanks 👍
Hi, I have a Siemens S1 14.44 Total Textile Management Washing Machine and it has tripped the power on several of our appliances. I have switched the trip switch back on and an error code F34 is displayed with a bleeping noise. I have watched your video about how to replace the faulty door lock which this error indicates however I am not sure if there is another issue as the power is tripping. The door did actually open. Any suggestions please, thanks.
Thanks for the video
You are awesome
My machine is exactly the same as in this video. I get E00 error code. After doing what you've told the machine started working but now it has an alarm sound kind of repeatedly while it is working and the speed perfect button's light goes on and off. When I press the button for a time or two then comes the same error again and I have to go through the process again I will appreciate it very much if you give me a tip
Thanks 🙏🏽
Thank you very much, the bug has been fixed
glad we could help you @alialrubarma this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
Could you recommend an alternate tool to reseat the cable spring so as not to chance nicking the door seal?
I've always used a small flat blade screwdriver and just taken my time, i hope you get on with it ok
Thank you for these clear instructions!
Iam Glad we could help you.
My Ebay Shop rover.ebay.com/rover/1/710-53481-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fstr%2Fhowtorepair&campid=5338676951&toolid=20008
If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel
th-cam.com/users/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
TH-cam. th-cam.com/users/Apart4u
Facebook. facebook.com/how.to.repair.appliances
Hi Paul. thank you it's very helpful video. what for there is two pressure switch on ZANUSSI model FLS-1486.?
This is not uncommon to have two pressure switches on the machine They all just set the different levels of water
Iam Glad we could help you
Please remember to subscribe to our channel
th-cam.com/users/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
TH-cam. th-cam.com/users/Apart4u
Facebook. facebook.com/how.to.repair.appliances
The best video ever. Thanks
Thanks very much. I had E61 on a builtin Logixx 7 (WIS28400GB/20). Fitted a new Doorlock as instructed, fixed the problem.
Iam glad we could help
Please remember to subscribe to our channel
th-cam.com/users/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or the website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going.
TH-cam. th-cam.com/users/Apart4u
Facebook. facebook.com/how.to.repair.appliances
Thank you very much for the useful info
This is very helpful. Thank you
Glad we could help you remember we do a live show every couple of weeks if you ever need any assistance
فيديو رائع لاكن لا اعتقد ان هذة الاجهزة قد تدخل مصر لاكن الشرح ممتاز
thank you
Iam Glad we could help you
Please remember to subscribe to our channel
th-cam.com/users/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Thanks a lot!!! very useful indications
You are welcome! Thanks 👍 for watching and please remember to subscribe to the Channel as that's what keeps us going in able to make the video for you
Thanks. Very clear and helpful.
Hi I have sharp ES-FP812SA 7Kg
There is an error E01 please help me about this.
Thanks for the tip on how to open the door :)
Iam Glad we could help you. If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel
th-cam.com/users/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
TH-cam. th-cam.com/users/Apart4u
Facebook. facebook.com/how.to.repair.appliances
Hello, I followed your instructions on how to replace the doorlock and it worked perfectly for over a month but now the E61 error has appeared again. Do you think I should replace it again or could it be something else? Thankyou
If you already replaced the lock with a new one, this is more likely to be a different type of fault, but without having the machine in front to me, I can't be 100% sure @NR-er6xh please remember to subscribe to our channel as that really helps us th-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
Hi, I have washer / dryer wkd28540eu/01 which triggers E01. When press start it pumps for 10-20 seconds and after that error comes up... Please some advice (float switch measured and ok, level switch measured and ok)
EDIT: It was due fck...ng cable!
Hello, could you help me with my washing machine problem? I have AEG L64840l model and what i was figure out that showing E42 in service mode so i suspect that is problem with door lock. Once was E68. Or can be even with mother board?
Washing machine has start to stoping during the program and i have notice that the doors are opened. Beside that also when should program be done, still showin 1 minute till the end. I have clean the heater, water suply and water pump with the help of your great videos so kepp going on that way! Thanks!
👍Большое Тебе мужик Спасибо ! 👍
THANK YOU FOLLOWED INSTRUCTIONS CAREFULLY FIXED F16 PROBLEM JUST LOOSE PIN ON LOCK MOST DIFICULT PART WAS REPLACING WIRE ON DOOR SEAL AND ENSURING THE SEAL REMAINED SECURED TO METAL CASING ON MACHINE
i have iQ 700 Siemens washing there is no bottom hock to unlock the machine can you plz guide me for that ????
I HAVE AN ERROR F59 IN MY WASHING MACHINE SIEMENS AND MY WASHING MACHINE DONT SPINING INFACT STARTS TO INCREASE SPEED AND STOPS ...WHER DO I CHECK ? THANK YOU...
Good job mate. Thank you
Thanks it helps
please remember to subscribe as that's is was keeps this channel going. Thanks 👍
bravo je ne savais pas ous allais le noir en plastique merci beaucoup!!!!!!!
Hi do you know what E64 error code on my Bush WMNBX1016W means? Is it to do with the door locking? Any help would be much appreciated thanks
Thanks for your help
Can you do us a favour and please share this video on your timeline Facebook twitter etc .
This will help other people who can’t get engineers out to help them.
th-cam.com/video/rFyGAHVFUW8/w-d-xo.html&t
facebook.com/how.to.repair.appliances/
Stay safe
I have seimens iq300 wm10k200gc machine it show a circle error on the left side of display. I did not get any help from internet yet. If you any solution for this error please help me. I am also belongs to electrical and electronics field.
I have a question all the error code you mentioned have to do with the door lock?
please use our website for questions
Can you do us a favour and please share this video on your timeline Facebook twitter etc .
This will help other people who can’t get engineers out to help them.
th-cam.com/video/rFyGAHVFUW8/w-d-xo.html&t
facebook.com/how.to.repair.appliances/
Stay safe
I have a Bosch next 500 wfmc3301uc/02 is the procedure for that the same
Explications Top... machine réparée, au moins 100€ économisés. Merci!!!!
I have F : 57 faultcode.
I just opened the machine by using your advice BUT the code is still there... what the hell that means?
Change it
very useful video...🖒🖒🖒
Very Useful
Thank you very much.
Hi how-2-repair. Thank you for your video. I have a question hoping you ca help me. I have a Bosch machine that is not working since one week. I don't know what is the problem and I don't know if it's an error or a piece of the machine. When I choose a program with the door open and then I close the door, the machine tries to put the lock of the door several times (for about 10 seconds) but then nothing happens. The "start" button flashes and I try to activate it but notihng happens. So I tried to program the machine but this time whit the door closed. Again, we hear that the machine tries to put the lock of the door several times but nothing happens and even worst, if I touch the "start" button during the first 5 second, the circuit breakers leap. I thought that it could be the heater or the interference filter but both are ok. Can you help me please??? I don't know if it's just an error of the circuit (even if I don't have an error code on the display). Thank you very much you for your help.
Same problem I have... What can I do?
My bosch classix xx 5.5kgs washing machiene showing e 26 error
Plz i have a problem with my bosch waq2449xme im gonna crazy and i don't found the problem with E23 please helping me thank you
My hoover washing machine E01 alarm showing after I change door switch still same alarm coming how to reset
Hi, changed the lock and reseted, but still having the same problem!
ขอบคุณมากค่ะ มีปัญหาพอดี love you
Thanks 👍 for watching and please remember to subscribe to the Channel as that's what keeps us going in able to make the video for you
I have the E61 faultcode, but it was one of the fuses, so I will say check the fuses first
what fuse?
The machine uses two phases 230 volt, and one of the fuses in the fusebox in the house was broken
Jonas Malmgren
I have a Siemens and Error „F61“. Was your mashine still working with one Fuse? Mine is working but sometimes crashing. Where is the fuse-Box? Thanks!
i have a fault code f63 on a Bosch WAE24470GB/08 FD 8711, can I reset this or know what the problem is likely to be?
Door lock
magic.Thank you
Iam Glad we could help you.
My Ebay Shop rover.ebay.com/rover/1/710-53481-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fstr%2Fhowtorepair&campid=5338676951&toolid=20008
If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel
th-cam.com/users/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
TH-cam. th-cam.com/users/Apart4u
Facebook. facebook.com/how.to.repair.appliances
please help me for the code e21 to my siemen washing machine. what can i do this code e21? 😪😪
Hi, ihave Bosh Wash Dry error codes E35. Can you help?
Hi
Tatiana Savolainen I recommend
What dos the code E16 on maxx6 Bosch washing machine means please
How can fixed the E21 in avantixx bosch washing machine
please ask questions at website with full model number Iam Glad we could help you. If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel
th-cam.com/users/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
TH-cam. th-cam.com/users/Apart4u
Facebook. facebook.com/how.to.repair.appliances
ما اسم قطعة القفل لأجل شرائها و تبديلها عندي خطأ E61 ؟
Code F04 in my ClassicPro Washer 6Kg. Please Help
I have a problem of E06 please what can I do?
I have error code E34 on Siemens IQ500. Changed the doorlock, but still have the same problem. Door wont lock! Any help?
PCB problem
hello i have a problem on the display shows me the number f 19 siemens iq 300 who can help me thanks in advance
Thanks so much but i have a mabe digital give me error F08 why?
I have Siemens iQ 300 giving E 003 error what i will do??
Great Video....already subbed.......i hope you could help me out, i have Siemens WM12 and after repair, the F43 warning comes on. Could you please let me know the procedure for reseting it? Any help will be greatly appreciated. Am desperate, :)
thank you very
Merci beaucoup
3:24 that s very difficult to do to not broke nothing
E 30 error code washing machine Panasonic front load
What if my washing machine model is FLX108CF220??
I'm sorry I do not understand the question completely. This looks like your model number but you did not include the make. glad we could help you Δημήτρης Μητσάτσος this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
what does f08 and e01 mean?
Thansk
I am using ifb washing machine in display coming AC H1 showing what is the problem any one give me reply
Siemens E22 error code mens what problem in machine ?
Thanks sir
Thanks I wish we could understand what you said 😂
L175 what problem tell me
oh..darn it mine won't work..
I try it but didn't work...
Definition of a gangster
I take it you're talking about the manufacturers Thank you for leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Siemens IQ 500 washing machine error means
Like this video
F 34 error
Please for code error 34 boş machine 8kg
I have eror code E00
siemen iq300.
l have a problem of E 64 please what can I do ?
F:26
F.26
تغير لوك الباب للغساله كريازى 5ك
1E🤷♂️🤷♂️🤷♂️
SAMSUNG .1E..j843 🤷♂️🤷♂️🤷♂️
Panasonic
Powar on ,to display error ,end