Hi Suzanne. Yes, It will be more controlled with a door closer on the door. It will allow the door to be controlled hydraulically and help prevent the wind from slamming the door. There are some limitations, as a strong wind can still grab the door and prevent it from closing in certain conditions. Would also recommend a door stop when using a door closer to prevent the door from opening too far if grabbed by the wind and damaging both the door and door closer.
Exterior door opening in the building wood frame out if 2x8 the door us in its own frame steel the framing of 2x8 is 6in inside to mount top of closer it hits the should I mount closer on outside the so closer doesn't hit door
hold on, @2:07 you just marked 9 1/8" not 9 1/16" . unless you held the hook end of your tape at 1/16". I thought i was imagining it but i went back and froze the video.
Nice job showing how it’s done. Like you said ones you’ve done a bunch it’s easy. I assemble the arm on my cart, then just mark out one hole for the body and the one for the shoe, hold up the body then giver with the self tapping screws. I’m a carpenter also, doing high rise at the moment
Olá Boa tarde assisti seu vidro sobre instalação de mola aérea e gostaria de saber se pode instalar o contrário. A mola no alisar e o bracinho da mola na porta
Absolutely the best tutorial on the TH-cam . Thank you .
great video, been looking at these all day for the way for me and this is the best, thanks :)
Thank you very much. You will be amazed at how much help you were .....
Very nice video. If I get the arm extension kit, do the installation/drilling dimensions stay the same?
well done ,this helps greatly thanks
This is the best. Like a pro. Tranks! 😉
never seen anyone mount the body of the closer on the frame before. Usually it's mounted on the door.
هل البراغي العاديه تثبت في الباب الحديد وما تنسحب مع الوقت والا فيه براغي خاصه للحديد . يعني ينفع نستعمل نفس براغي الجدار مع الباب الحديد ؟؟
thanx for this lovely vedio I did it but the door is so hard to open
Have a question will the door closer help it to not slam because of the wind
Hi Suzanne. Yes, It will be more controlled with a door closer on the door. It will allow the door to be controlled hydraulically and help prevent the wind from slamming the door. There are some limitations, as a strong wind can still grab the door and prevent it from closing in certain conditions. Would also recommend a door stop when using a door closer to prevent the door from opening too far if grabbed by the wind and damaging both the door and door closer.
@@designhardware or a wind chain
Exterior door opening in the building wood frame out if 2x8 the door us in its own frame steel the framing of 2x8 is 6in inside to mount top of closer it hits the should I mount closer on outside the so closer doesn't hit door
hold on, @2:07 you just marked 9 1/8" not 9 1/16" . unless you held the hook end of your tape at 1/16". I thought i was imagining it but i went back and froze the video.
Very detailed and on the dot ,best I've seen ..
Nice job showing how it’s done.
Like you said ones you’ve done a bunch it’s easy.
I assemble the arm on my cart, then just mark out one hole for the body and the one for the shoe, hold up the body then giver with the self tapping screws. I’m a carpenter also, doing high rise at the moment
Just use the closer as a guide for the holes no need for all that measuring you only need one measurement
Yes am agree big time
Is it possible to top jamb mount but in a pull side ?
How to install a door closer
th-cam.com/video/xm3_5bMjMmM/w-d-xo.html
-Can you top jamb mount a pull door? Can't figure it out...-
Can you perform a top jamb mount on the pull side of a door? Can't figure it out...
Is it the same for doors opening to the left?
Good how to.well explained..
Hey
Nice job bro
Hey I love your tape measurement 🙌🏿
your the man
Great job.
How do you makr adjustment for power?? Clockwise is stronger??
Why dyamej door dorty woork
Obviously using the wrong screw head for the screws using to fix the closer. Yanks dunno Wah they're doing
Olá Boa tarde assisti seu vidro sobre instalação de mola aérea e gostaria de saber se pode instalar o contrário.
A mola no alisar e o bracinho da mola na porta
Nice demo, but must change language if in Hindi is better to understand.
heavy ol’drill those days