A good & understandable instructional video with illustrations. Wish more people who try to show / teach things, via videos, could make videos like this. Maybe that could be another 'side hustle' - how to make good instructional videos.
I personally don't like TH-cam videos for instructions and would rather read an online manual. I am an impatient person so my videos are geared toward what I would want in a video. Thanks for the appreciation
I don't have a homing thing and I don't really want to add one as I'm only wanting to do small projects how do I set it do it's not trying to breakout the frame?
Thanks for posting. I got a laser off a friend who could not get tit running. I have it up and running, but the Z axis only goes 1 direction when using either arrow. Any thoughts? If I reverse the Y1 and Y2, it just goes in the reverse direction. I tested in LightBurn and it is the same so I am assuming its a hardware or working issue tho everything looks correct best I can tell
Anthony. I've installed laser grbl but it will nit connect up to my xtool D1pro necessary file is installed and on right com. What could I be doing wrong thank you
Great Videos, I started watching them from the beginning one by one. Can you elaborate more about the homing cycle, I am building Acro with NEJE 40W and I would like to have my limit switches at the bottom left corner and have soft limit. This G53 G92 local and Global thing is very confusing.
Anthony, 1st set-up and users we are having trouble with movement of left and right, up and down everything wants to move horizontally. sorry if i am missing where you may have addressed these types of issues or done a troubleshooting video
I recently had to switch laptops. Not my machine won't connect to it. I checked com ports, verified the driver is installed and properly working, it still won't connect. Any suggestions? Should I try changing my baud?
It is very difficult. I think you can use WINE to instal DirectX and .NET frameworks,, then you can install and use laserGRBL. It's not a pretty installation though. Try LaserWeb instead??
@@brakthehun I gave up and bought a used Windows PC solely for use with the engraver. But thank you for your reply. I'm now waiting on an air assist pump to arrive before I use the engraver.
Hi, thanks for all the great help, question, i have something backwards on my setup. I had to flip text jobs vertically to make them engrave correctly, can you please tell me what I did wrong?
HELLO! I have the Nasum A5 PRO and it is stuck in Connecting mode. I have downloaded and switch to COM7 which is what my port is. I have the 1.1f code showing with all the other codes. However, I'm stuck in Connecting status. What should I do? using the GRBL System for now on PC
I'm having issues with double lines in lasergrbl...file created in fusion360 ..exported into dxf , opened in illustrator cc and export as PNG file but in grbl v5.4.0...in the vectorize feature.....its giving me double lines
I’m trying to engrave on bamboo cutting boards. I was very successfull last year. Set it aside for a while when I went back to work. Now I need to burn for Christmas and I can’t get a good solid burn no matter what I do. Ack! Any help is appreciated. 6550 15w laser.
@@brakthehun thank you! I don't know what this GRBL Shield is? I am using LaserGRBL as a program for my ATOMSTACK Laser Engraver,PRO+ Laser Engraving Cutting Machine and need to learn how to home it...thank you!
Hi this is Aftab from Pakistan. I am watching your GRBL Tutorial 1 here at Top there is COM you were using COM28 but I am confused here what does it mean ? I have conected my Engraver with my system but its not active please guide me thanks.
1 Question - I use COREL DRAW and create images in any file necessary - For several years i was an "Authorized Corel Draw Training Partner" - Can I just IMPORT or OPEN a file using this software?
Not native Corel files. It has some svg support for cutting along vectors. You will probably want to export as PNG or similar bitmap and open that with LaserGRBL.
Hi and please help - I’ve got the sculpfun S9 We downloaded the software, checked the device managed - we are connected to CH340 But we get the error code 1000 flash reader ??? Can someone please help
Hi. Thanks for sharing. I have a laserstorm s5 My machine connected easily at first buy it is not connecting anymore at all. I've been following ur steps.. and I have also ensured drives is installed, machine cable I changed to brand new USB cable, and I tried on 3 different laptops ensuring correct com and driver installed. Ive restarted computer. Ive reinstalled software after removing from scratch..But for some reason it still doesn't connect. Do u have any tips for me
When I start my Neje 2 that's plugged into my computer the LaserGrlb software starts to connect and then disconnects, The computer port setting shows the correct com. I don't know what is wrong
I might need to watch it in action. I know there are special drivers needed to use the NEJE lasers: wiki.nejetool.com/doku.php?id=nejelaser_master_2#lasergrbl_software If you continue to struggle,, let me know and we'll try some other things.
You will have to download the GRBL updater from NEJE and select the first option. Then it will be able to talk to LaserGRBL and LightBurn: wiki.nejetool.com/doku.php
Mine says homing fail and when i unlock it and try to manually move it it says travel exceeded. It jerks in the same spot. even when connecting it doesn't move. Literally just stays where i put it. Any ideas?
@@brakthehun it doesn't travel at all unless I push it with my hands lol. And not sure about 2axis homing. I just set up the laser and this was the first video I've looked at on how to connect it to lasergrbl
A good & understandable instructional video with illustrations. Wish more people who try to show / teach things, via videos, could make videos like this. Maybe that could be another 'side hustle' - how to make good instructional videos.
I personally don't like TH-cam videos for instructions and would rather read an online manual. I am an impatient person so my videos are geared toward what I would want in a video. Thanks for the appreciation
Thank you for a great instructional video for someone new to this software!
Ty so much, couldn't connect and you set me right up. Appreciate you
love the video, but can you tell me if there is a way to connect if no port is showing up
Thanks man! from Sweden.
New to lasering. Do you have a more up to date video. I just purchased a Mecpow pro with air assist 10w and have downloaded LaserGRBL
Thanks for the tutorial, now to connect it to Adobe Illustrator, I've subscribed to see what else you can teach me. Thanks again.
Export as an SVG and open with LaserGRBL
How do you Home? I have not found it in another video that you mentioned. Thanks
Not all lasers have homing. YOu can force try it by typing in $H in to the console and hitting enter.
Worked. Thanks
I don't have a homing thing and I don't really want to add one as I'm only wanting to do small projects how do I set it do it's not trying to breakout the frame?
Do you have to connect the machine? Can I just send files to an SD card with the Creality Falcon 10W?
I see that it has the SD slot but I don't see a way to access it from the front controls. You may have to connect directly
Thanks for posting. I got a laser off a friend who could not get tit running. I have it up and running, but the Z axis only goes 1 direction when using either arrow. Any thoughts? If I reverse the Y1 and Y2, it just goes in the reverse direction. I tested in LightBurn and it is the same so I am assuming its a hardware or working issue tho everything looks correct best I can tell
im having trouble with the laser pointer when i move it y-axis it goes off the screen how can i make it move correcty
Anthony. I've installed laser grbl but it will nit connect up to my xtool D1pro necessary file is installed and on right com. What could I be doing wrong thank you
Before I watch, would this tutorial be good for my Neje max3?
Sure.
LaserGRBL is good for engraving images on to things. If you're using your diode to cut,, you might consider LightBurn.
You mentioned that the dialog box might not have anything listed, mine does not, what do I do then without anything to select.
If plugging your machine in doesn't work,, you may need to search for drivers. My suspicion is you're missing the CH340 driver.
@@brakthehun thank you I will try that next Thank you so so much.
is my TOPQSC laser compatible with Laser GBRL?
Great Videos, I started watching them from the beginning one by one.
Can you elaborate more about the homing cycle, I am building Acro with NEJE 40W and I would like to have my limit switches at the bottom left corner and have soft limit. This G53 G92 local and Global thing is very confusing.
Anthony, 1st set-up and users we are having trouble with movement of left and right, up and down everything wants to move horizontally. sorry if i am missing where you may have addressed these types of issues or done a troubleshooting video
What controller are you using??
Wher I may get Un-Lock botton ?
I recently had to switch laptops. Not my machine won't connect to it. I checked com ports, verified the driver is installed and properly working, it still won't connect. Any suggestions? Should I try changing my baud?
Does the com port show up when you plug the USB in??
How much volts and amperes are you providing to yoour machine. My motors are not moving quite swifty
th-cam.com/video/Y-Kk2n-Chuk/w-d-xo.html
12v / my motors drivers are all set to 400ma.
Hi. Can you provide the link for adding the homing function plz
th-cam.com/video/diPH4qh4r78/w-d-xo.html
Can you tell me how to install Laser GRBL program on a raspberry pi?
It is very difficult. I think you can use WINE to instal DirectX and .NET frameworks,, then you can install and use laserGRBL. It's not a pretty installation though. Try LaserWeb instead??
@@brakthehun
I gave up and bought a used Windows PC solely for use with the engraver. But thank you for your reply.
I'm now waiting on an air assist pump to arrive before I use the engraver.
Hi, thanks for all the great help, question, i have something backwards on my setup.
I had to flip text jobs vertically to make them engrave correctly, can you please tell me what I did wrong?
$3 is the register for flipping directions. Try typing in $3=1 in your console.
1 more question as I am Oooold and just not finding the website and/or link to download this software for WINDOWS 10....HELP????
Lasergrbl.com
HELLO! I have the Nasum A5 PRO and it is stuck in Connecting mode. I have downloaded and switch to COM7 which is what my port is. I have the 1.1f code showing with all the other codes. However, I'm stuck in Connecting status. What should I do? using the GRBL System for now on PC
How did you figure out it has the 1.1F Firmware??
I'm having issues with double lines in lasergrbl...file created in fusion360 ..exported into dxf , opened in illustrator cc and export as PNG file but in grbl v5.4.0...in the vectorize feature.....its giving me double lines
I have a Comgrow z1 that will not connect with laser grill…com port and baud rate are correct. I have no issues using light burn. Thank you!
Do you have lightburn running when you try to use LaserGRBL??
@@brakthehun no, just laser grbl
THANKS
Hi there...cool tutorials. What machines are you using and did the enclosure come with it?
I design and build my own laser machines
www.thingiverse.com/thing:4699432
I’m trying to engrave on bamboo cutting boards. I was very successfull last year. Set it aside for a while when I went back to work. Now I need to burn for Christmas and I can’t get a good solid burn no matter what I do. Ack! Any help is appreciated. 6550 15w laser.
Hello my laser does not have the home cycle but I still need help
What's the issue?? Have you tried unlocking it?? (Unlock,symbol on bottom)
How do you set up a homing cycle?
th-cam.com/video/diPH4qh4r78/w-d-xo.html
@@brakthehun thank you! I don't know what this GRBL Shield is? I am using LaserGRBL as a program for my ATOMSTACK Laser Engraver,PRO+ Laser Engraving Cutting Machine and need to learn how to home it...thank you!
Hi this is Aftab from Pakistan. I am watching your GRBL Tutorial 1 here at Top there is COM you were using COM28 but I am confused here what does it mean ? I have conected my Engraver with my system but its not active please guide me thanks.
Yours may be a different COM. What machine do you have??
1 Question - I use COREL DRAW and create images in any file necessary - For several years i was an "Authorized Corel Draw Training Partner" - Can I just IMPORT or OPEN a file using this software?
Not native Corel files. It has some svg support for cutting along vectors. You will probably want to export as PNG or similar bitmap and open that with LaserGRBL.
@@brakthehun THANKS!! Keep up the good work!!!!
How do u find a COM none shows up when I drop the arrow
If you could help a first timer I'd be happy thank u
You may need to install drivers for your laser. Which laser do you have??
Amotstack
Hi and please help -
I’ve got the sculpfun S9
We downloaded the software, checked the device managed - we are connected to CH340
But we get the error code 1000 flash reader
???
Can someone please help
Hi. Thanks for sharing. I have a laserstorm s5
My machine connected easily at first buy it is not connecting anymore at all.
I've been following ur steps.. and I have also ensured drives is installed, machine cable I changed to brand new USB cable, and I tried on 3 different laptops ensuring correct com and driver installed. Ive restarted computer. Ive reinstalled software after removing from scratch..But for some reason it still doesn't connect. Do u have any tips for me
try restarting grbl, checking power, restarting computer (i am very knew to this)
Thank for
VideoI i bought a laser ortur 15w and couldn't connect it to my computer I did not find the port number
Mine still won’t connect Lightburn can’t find it either
When I start my Neje 2 that's plugged into my computer the LaserGrlb software starts to connect and then disconnects, The computer port setting shows the correct com. I don't know what is wrong
I might need to watch it in action. I know there are special drivers needed to use the NEJE lasers:
wiki.nejetool.com/doku.php?id=nejelaser_master_2#lasergrbl_software
If you continue to struggle,, let me know and we'll try some other things.
You will have to download the GRBL updater from NEJE and select the first option. Then it will be able to talk to LaserGRBL and LightBurn: wiki.nejetool.com/doku.php
My Engraver is not connecting with my system. Physically it is connected but it is not working. When I klick Connect botton it beeps but not connect.
Hi, I.m having the same issue. I hope someone gives us guidance soon.
Did u solve the issue? I have same issue
why my connection "handle broken "
Mine says homing fail and when i unlock it and try to manually move it it says travel exceeded. It jerks in the same spot. even when connecting it doesn't move. Literally just stays where i put it. Any ideas?
Does it travel in the right direction??
Does it move when you tell it to home??
Do you have 2-axis homing enabled in the firmware??
@@brakthehun it doesn't travel at all unless I push it with my hands lol. And not sure about 2axis homing. I just set up the laser and this was the first video I've looked at on how to connect it to lasergrbl
@@bhavikagajipra4188 you may need to load correct firmware for laser usage. What machine do you have??
@@bhavikagajipra4188 th-cam.com/video/Y8JyiJ08VwU/w-d-xo.html
@@brakthehun i have the master2 20w. dowloaded according to the user manual
Hi, I did all the steps in your video, but still my 3018 machine can't connect . I have LaserGRBL 4.2 on windows 10, can you help me out
In laser GRBL there is an option to I stall a CH340 driver. Did you try that yet??
It says "Homing fail" and doesn't move. Any idea why?
It seems to think it's moving, but it's not
If you hot unlock ($X) and try to move it,, does it move??
If you hot unlock ($X) and try to move it,, does it move??
@@brakthehun No, it doesn't
It works, it was the wall-socket.
It says my JL five is not compatible with windows 10