Karsis Oy - Oksat pois
ฝัง
- เผยแพร่เมื่อ 20 ส.ค. 2024
- Pikakarsija OKSAT POIS - menetelmään.
Soveltuu keskikokoisiin ja pieniin runkoihin harvennushakkuukohteissa kuin myös avohakkualueila. Pikakarsija helpottaa ja nopeuttaa ratkaisevasti työtä. Latvustavara tulee kokorunkojuonnossa samanaikaisesti laaniin.
INSTANT DELIMBING express delimbing method is well-suited for
delimbing medium-and smallsized stem in connection with thinning
and clearcutting.
Tops of trees can be hauled simultaneously to the landing when
applying whole-stem skidding.
Technical details: 20-5 delimbing using an
ATV
30-7 cm delimding using a tractor.
- Express Delimber is a sensible logging alternative for forest owners, who intend to apply whole-tree skidding.
Suitable operations are regeneration fellings,felling of hold-overs,
and preparatory fellinds.
Menetelmä on hinnaltaan kohtuullinen.
Karsis Oy
Tilaukset:
puh: +358 45 809 3555
email: jorma.harlamov@hotmail.com
Ihan turha keksintö.
I could see it handy to own in some spots if u have second man it would be awsome i sapose leaves lot of limbs and this .loging is never easy for small guy inless u spend lots of $$$$ on most highteck. And then you better know how stuff work because your part machanic
hieno laite. näyttää toimivan.
harri hiltuçen
2015 ja näin hyvä kuvanlaatu...
Täyttä kasaria tämä pätkä on, ääniraitaa myöden. :)
Ok
Clever
Where can I get one of these and how much$
Mohl by mi prosím někdo poradit jak a kde seženu tento odvětvovač děkuji.
Vähän on kuin repulla olis karsittu
Can i buy this in Germany ?
Wo bekomme ich das zu kaufen bitte und was kostet das
How much? Where are they out of?
Hi Larry. They are manufactured in Finland. In Finnish "oksat pois" means "branches off." I, like you and many others who have viewed this video, have been unable to locate a vendor in their own country or overseas. I recently contacted a friend of mine, a native Swede living in Sweden, who will check into its availability in Sweden. I hope that he comes up with something. Otherwise, I am confident that I will be able to fabricate one in my shop. I will try to remember to keep you posted. Vince
@@bombadiltreefarms314 Hey Vince. I would like to buy one myself. Have you made any further progress with your research? Kind regards Martin.
@@martinkuhr9017 Martin, thank you for the reminder. My Swedish friend, along with a Finnish friend of his living in Sweden, confirmed that the product is no longer in production. I then fabricated my own from an old barbecue grill size propane bottle and some other scrap metal I had laying around. It worked but not as well as the real thing and needs an alteration or two to improve it. Because of your reminder, I will plan to make those improvements this winter. I did shoot video footage showing the fabrication and its "test flight." If I am able to improve what I made, I plan to post on TH-cam later this winter a video demonstrating its fabrication and use. Please remind me as often as you wish so that I don't forget. My sincere appreciation and best wishes! Vince
Martin & Larry, an update for you. I did improve my homemade imitation that worked quite well this winter until one structural failure after another occurred. Each time I reinforced the point of failure, it worked well until failure occurred at a different location. I am undecided if I will make and post a video on TH-cam showing its fabrication, use, failures, and reinforcements. Vince
where can i get this nice item??
you can probably buy it online or hire someone to build it for you
No veru nic moc