This is amazing! Super easy and it really works! :D Thank you very much!!! I had an old HDMI to VGA adapater rolling around. Wanted to use it to connect my PS4 to a projector and it didn't work. Followed this tutorial, soldering the red wire of an old USB cable to pin 18 and the black one to "GND" pin. Tried it again on the PS4-Projector and works like a charm!
My hdmi to vga has a single resistor, 3 caps, central controller, and an unused Diode, capasitor and an audio and power jack. Looks like it is a PCB That can be both ways depending on what is soldered on. Not as intricate as the one you have.
Shiiiit I was going crazy coz I just bought my ps4 and I have just sold my tv coz I will get my self a new one but I wanted to try it on my computer display which has VGA only and I had the same adapter that you had. I have studied IT so I know a lot about soldering and electrical components so I tried the method you showed us and it fuckinnnn worked!!! god, you don't know how happy I am now I just stared at the display for 5 sec like an idiot and couldn't believe that it worked! thank u very very much sir you really saved my day and a lot of frustration. thank you again
ZouZou Khazma i am not sure, but i can CONFIRM that this method works 💯 percent and it’s-worth trying you won’t loose much but be carful when soldering the pins cause u don’t want to solder to of them together and may damage Hdmi output
I can confirm this works. Add 5v to non-powered(active) hdmi to vga adapter and PS4 will work (Because PS4 low power output hdmi port). I have a questions: Did you fully de-solder, or did you just barely melt the solder pad and let the wire stick into the melted solder and harden?
Ok, thats what I figured looking at the solder blobs. I accidently pulled out the pin 18 and ground wire from my adapter I have and now need to buy a soldering iron.
En mi caso el HDMI venía de la salida de un decodificador de video cable digital y no tenía la corriente necesaria. Funciona perfecto, tenía duda en cuanto a los pines ya que el 18 y el 8 no estaban marcados y el circuito difería del que sale en el video. Para no errarle vi que hay un integrado AMS1117, es un regulador de voltaje, conecté la alimentación externa directamente a su entrada. Me solucionó el problema
Dear Please post the wire arrangement ..because all wires broke and don't know where to connect these wires...please if you have video...please share the link.
when i plug added power to the usb plug, the ps4 suddenly power off, after restart ps4 can display to my vga monitor. But, when i want to use direct connection using hdmi to my hdmi monitor, it's broken, no signal, i think the hdmi ic got short, please help..
You were doing pretty good before the tape. Just tie a knot in your power cable just inside your enclosure like most manufacturers do and it can never be pulled out without needing any tape.
Hi, good video! I've a problem with a HDMI-VGA converter (with integrated 5v). Whe I use it with my PS4 I notice that left channel is reversed with right and right is reversed with ground.. So when I pull off gently the male jack I have the right sound! Can I mod the converter? Thanks
I have same HDMI to VGA converter 18th pin +5v ok and 17th pin ground ok .but my chrome cast2 not working for HDMI to VGA converter.but audio working . screen resolution out of range 67.5khz/60hz. Show the screen . please any ideas... converter volt is ok.
Great! I have a question: If i have another adapter, how can I find wich pins needs to be supplied with 5v? and in any case, how do i know it's 5v or another v? Do i have to measure it from the hdmi cable to each pin with a tester? Thanks for the video and sorry for my english!
i use this mod but doesn't work, also after a while, my HDMI 3 to 1 splitter also doesn't work. idk what happened but maybe i has to buy the adapter with power cable ==
Sir, I use a MICRO HDMI to VGA WITH AUDIO JACK converter, and I only use the audio jack, for monitoring audio on a mirrorless camera using headphones, and it works. it's just that when micro hdmi is connected to the camera, the screen on the camera turns off. So it is difficult to operate it, Can I disconnect one of the cable pins so that the video transfer is not active ?? .. And what cable from the pin should I disconnect ?? .. Sorry if my English is bad, because I use Google Translate.
first of all thank you for your instruction. i cut a phone charger cable and successfully soldered it. now i can connect my ps4 pro to my old vga monitor. it's also working without ground. my question is what happens if i don't solder ground?
Im trying to connect to and old CRT. After doing this work for a while but after restart the PS4 i got black screen on CRT. What is the recommended screen settings i need to put?.
@@AllesOverApparaten and why not? XD. Because i play games with this on my 22' inch Philips pc CRT. I like the colors on It. Have fully black color. My Xbox 360 for example looks so cool on It. I can play perfectly to the 360 at 720p, that its the maximum res supported, but after make active the converter only one time i can make fully visible the PS4 on the monitor but dont remember the settings i put on that moment.
This is my CRT monitor specs www.philips.es/c-p/202P40_20/qxga-realmente-plano-de-22-pulgada/caracteristicastecnicas and the max resolution is 2048 x 1536 a 80 Hz
Help! totally noob bout this .. i have a different HDMI-VGA i did found the pin 18 but cant find the pin 8 for the ground..any suggestion bout the 2nd wire?
drive.google.com/drive/folders/0B7ao5uHezEb6M0ZKbG1NTlk3OXM this is the circuit im a total noob about this so can you help me with the 5v? thanks in advance i dont want to buy a new monitor lol
Hi Loved watching this video😊 But i aslo have a question In my cable it shows pin 18 And pin 8 is not there but instead there is 1,3,,5,,7,9 !! So what is the solution? Thanks
It can get it a bit warm but you should be able to touch it without a problem. Otherwise you may have to check the wires. maybe you soldered the 5v + wire to 2 joints at the same time. Mine gets a little warm too though.
GRIGORHS you need to have a adapter with a 3,5 mm sound plug in it otherwise you won't have sound. or you need to plug in you headphones to your controller.
@@AllesOverApparaten sir in my adapter it shows only pin 18. And pin 8 is not there. But instead there is 1 ,3 5,7,9 pin Can you please give a solution
I NEED HELP!My adapter hasn't the 8 ground point.Where i can find another ground point.Pleaseeee help!!!!!!!!!!!!!!!!!!!!!
This is amazing! Super easy and it really works! :D Thank you very much!!!
I had an old HDMI to VGA adapater rolling around. Wanted to use it to connect my PS4 to a projector and it didn't work. Followed this tutorial, soldering the red wire of an old USB cable to pin 18 and the black one to "GND" pin. Tried it again on the PS4-Projector and works like a charm!
So, is this hack for letting the PS4 connect to a projector? Could it be applied somewhere else?
My hdmi to vga has a single resistor, 3 caps, central controller, and an unused Diode, capasitor and an audio and power jack.
Looks like it is a PCB That can be both ways depending on what is soldered on.
Not as intricate as the one you have.
SNES Classic Mini with VGA adapter needed this mod! Saved me from getting an active adapter. Thanks.
Shiiiit I was going crazy coz I just bought my ps4 and I have just sold my tv coz I will get my self a new one but I wanted to try it on my computer display which has VGA only and I had the same adapter that you had. I have studied IT so I know a lot about soldering and electrical components so I tried the method you showed us and it fuckinnnn worked!!! god, you don't know how happy I am now I just stared at the display for 5 sec like an idiot and couldn't believe that it worked! thank u very very much sir you really saved my day and a lot of frustration. thank you again
and everyone who disliked the video can go to hell and start learning some IT to figure out how to do some electrical shit
@@dahman97
Bro.Can this method be useful to stb (set top box) with hd output to pc monitor with vga input?
ZouZou Khazma i am not sure, but i can CONFIRM that this method works 💯 percent and it’s-worth trying you won’t loose much but be carful when soldering the pins cause u don’t want to solder to of them together and may damage Hdmi output
@@dahman97
Thank you. I will try.
Thank you for the nice feedback, glad you found it useful! Anything else you want to see in a future video?
It was sooooo hard to apply the + and - wires but i managed thanks your video worked and good luck for the future as we need more people like you XD
such a people with rare videos are amazing a deserve beautiful life
brother I had ps4 pro.....when I connect to my monitor via HDMI to VGA connector.... it can't work there black screen only ..what can I do
I can confirm this works. Add 5v to non-powered(active) hdmi to vga adapter and PS4 will work (Because PS4 low power output hdmi port).
I have a questions: Did you fully de-solder, or did you just barely melt the solder pad and let the wire stick into the melted solder and harden?
LilStewie i fully desoldered the wires but i didnt show that in the video.
Ok, thats what I figured looking at the solder blobs.
I accidently pulled out the pin 18 and ground wire from my adapter I have and now need to buy a soldering iron.
This actually worked, haha. Even though I decided to buy a new screen since the old one was too low in resolution but this method worked with my PS4!
thanks buddy, now i can watch tv via set top box on my projector & monitor too.
Sameer Chapai No problem man!
What u did man same problem here
Sameer Chapai tell me what you did i have same problem
Hi, thank you for the video. Do you think it will work if I use my usb phone charger? I mean if i cut it open and solder it to the adapter. Thanks
Just fantastic, it worked perfectly! My sincere thanks!
Thanks for the video. Did you desolder the 2 cables before solder the new ones? Also, hope this solves the incorrect EDID info of these converters.
my converter is a bit differnt how can i find ground and power wire are those red and black?
did you find something else ?
My adapter doesn't have both 18 and 5 pin
What can I do ??
Same here mate
@@Scopeez12345 bro I found it on the other side of adapter's main
Try it too
En mi caso el HDMI venía de la salida de un decodificador de video cable digital y no tenía la corriente necesaria. Funciona perfecto, tenía duda en cuanto a los pines ya que el 18 y el 8 no estaban marcados y el circuito difería del que sale en el video. Para no errarle vi que hay un integrado AMS1117, es un regulador de voltaje, conecté la alimentación externa directamente a su entrada. Me solucionó el problema
Dear Please post the wire arrangement ..because all wires broke and don't know where to connect these wires...please if you have video...please share the link.
when i plug added power to the usb plug, the ps4 suddenly power off, after restart ps4 can display to my vga monitor. But, when i want to use direct connection using hdmi to my hdmi monitor, it's broken, no signal, i think the hdmi ic got short, please help..
Can you help me locate my 18 pin and 8 pin??
My cable is without aux can u give me pins for aux?
If ur using it for ps4 you can just use a aux cable and connect it to the controller aux port or put USB speakers on your ps4
You were doing pretty good before the tape. Just tie a knot in your power cable just inside your enclosure like most manufacturers do and it can never be pulled out without needing any tape.
Thanks for the video Bro👍
Can this method be useful to stb (set top box) with hd output to pc monitor with vga input?
Hi, good video! I've a problem with a HDMI-VGA converter (with integrated 5v). Whe I use it with my PS4 I notice that left channel is reversed with right and right is reversed with ground..
So when I pull off gently the male jack I have the right sound! Can I mod the converter? Thanks
You are a legend. Nobel prize winner.
I have same HDMI to VGA converter 18th pin +5v ok and 17th pin ground ok .but my chrome cast2 not working for HDMI to VGA converter.but audio working . screen resolution out of range 67.5khz/60hz. Show the screen . please any ideas... converter volt is ok.
Set the resolution at its minimum value then try upmost resolution. Output is higher than input signal.
Great! I have a question: If i have another adapter, how can I find wich pins needs to be supplied with 5v? and in any case, how do i know it's 5v or another v? Do i have to measure it from the hdmi cable to each pin with a tester?
Thanks for the video and sorry for my english!
I think just finding a ground is enough because you can find 5 volt with multimeter
my conventer looks diverent from inside
My vga adapters wires are broken i Dont know where to put which color can u please help me with that?
buy a new one bro
i use this mod but doesn't work, also after a while, my HDMI 3 to 1 splitter also doesn't work. idk what happened but maybe i has to buy the adapter with power cable ==
Worked for me. Thanks a ton!
Where can I find a cable with only 2 wires
Great tutorial
Sir, I use a MICRO HDMI to VGA WITH AUDIO JACK converter, and I only use the audio jack, for monitoring audio on a mirrorless camera using headphones, and it works.
it's just that when micro hdmi is connected to the camera, the screen on the camera turns off. So it is difficult to operate it,
Can I disconnect one of the cable pins so that the video transfer is not active ?? ..
And what cable from the pin should I disconnect ?? ..
Sorry if my English is bad, because I use Google Translate.
Which camera do you use? Isn't there a option in settings of te camera?
@@AllesOverApparaten thank you for your attention sir, my camera is Canon m50
Not exact camera but this might help th-cam.com/video/lYCGOQIXHF0/w-d-xo.html
@@Daniel-yb6fy thank you sir, I have checked the settings on my m50 several times, unfortunately there are no such settings
my usb cable have black red green and white wires ...can you explain it? Im sorry I dont have idea with this kind of stuff
How can make it to two pins?
Just cut off the green and white wires. Those are data wires so you don't need them.
Can you make it with 2 cables instead of the adapter?
first of all thank you for your instruction. i cut a phone charger cable and successfully soldered it. now i can connect my ps4 pro to my old vga monitor. it's also working without ground. my question is what happens if i don't solder ground?
emrah türkmen if the ground of the 5v usb cable is not connected you will not need this mod!
I didn't understand with the pins... Which one do I need to solder? If german, then pls help in german.
The 5v needs to go to the 5v point of the adapter and the other wire to a gnd pin
@@AllesOverApparaten and where can I find that?
the situation and song dosnt make dog
I have the micro usb port and it’s not working why??
My monitor says check for signal
What do i do
DreckkedUp plug it in with power 5v
Im trying to connect to and old CRT. After doing this work for a while but after restart the PS4 i got black screen on CRT. What is the recommended screen settings i need to put?.
Why would you want to connect your ps4 to a crt if i may ask? Just buy a very cheap flat panel screen.
@@AllesOverApparaten and why not? XD. Because i play games with this on my 22' inch Philips pc CRT. I like the colors on It. Have fully black color. My Xbox 360 for example looks so cool on It. I can play perfectly to the 360 at 720p, that its the maximum res supported, but after make active the converter only one time i can make fully visible the PS4 on the monitor but dont remember the settings i put on that moment.
This is my CRT monitor specs www.philips.es/c-p/202P40_20/qxga-realmente-plano-de-22-pulgada/caracteristicastecnicas and the max resolution is 2048 x 1536 a 80 Hz
I need help. I did it and it works well with my on board graphics but will not work with my gtx 1050 pls help
divesh nundlall I have got same problem have u found any solution?
Help! totally noob bout this .. i have a different HDMI-VGA i did found the pin 18 but cant find the pin 8 for the ground..any suggestion bout the 2nd wire?
Carlo Juan just look another good ground point
drive.google.com/drive/folders/0B7ao5uHezEb6M0ZKbG1NTlk3OXM
this is the circuit im a total noob about this so can you help me with the 5v? thanks in advance i dont want to buy a new monitor lol
ok ive done it. no solder but i'll gonno do it tomorrow
didnt see the GRD pin
thanks for the tutorials :D
?
i have gnd and 18 what shuld i do?
Or buy a actual tv
Can I buy them like that? What would I search up?
How can i find 5v positive pin???
Sir can i send you a picture so i know where i need to put the wires?
Yes, send me an email allesoverapparaten@gmail.com and i will try to help you out.
Hi
Loved watching this video😊
But i aslo have a question
In my cable it shows pin 18
And pin 8 is not there but instead there is
1,3,,5,,7,9 !!
So what is the solution?
Thanks
Mine says GND
is that ground?
Yes
ThePlatinumSupporter Np. However I highly recommend to ground it just in case it short circuits so that it won't damage your device
🤦♂️
Is he using a charging cable but when I cut my charging cable it shows 4 wire he has only 2
use the black and the red wire
Use black and red one. The others are Data wires.
🤦♂️
The music is annoying
Amen
Help plz my hdmi to vga have 18 pin and dont have 8 pin?? What i do??
DiAbLo GAMING google for hdmi male connector pinout and then find that soldering point with multimeter on adapter
how can i replace the hdmi port if its broken please?
if you have a good enough soldering iron you can resolder the port.
AllesOverApparaten i have but the problem is that the entire head is taken of
can you explain what you did in the video im lost
Argo i soldered a usb cable to 2 pins of the adapter so it has 5v extra power. if you plug that usb cable in your playstation it will work just fine
OMFG YOU ARE A LIFE SAVER
can you help me
I dont have sonder can i use black electricity band for this.. Also i plan to use my old usb phone cable will it okay to add power?
that should work
Why the need for 5v. Don't it works with out it?
For the ps4 it needs power input. But you can buy a vga adapter with the power supply, no need to mod.
@@davidalves6813 thanks
Also, when using an HDMI Extension Cable, the adapter doesn't work for some reason, but giving that 5V input does the trick
is there another way
did you find something else ?
Works for me but can it damage the PS4 system???
No
Thank man it worked
I love u
Can this hack works for CPU nvidea GPU no signal
Works ! Thx tried it
PowerCatz no problem man! glad i could help
When I turn on the Ps4 for a while, it will get hot. Is there any problem. Do I need to make some Cooling module?
AllesOverApparaten can u speak English
It can get it a bit warm but you should be able to touch it without a problem. Otherwise you may have to check the wires. maybe you soldered the 5v + wire to 2 joints at the same time. Mine gets a little warm too though.
Thanks a lot
No problem.
i use 2 week without any problem
Can i reverse the hdmi to vga converter?
Thnxx for your help..
Gracias me funciono 😊👍🏼
ErnexTz podrías ayudarme yo tengo ese problema que mi monitor parpadea con ese adaptador
Oscar Alf ya soldaste los cables?
aún No! Yo conectó el adaptador y funciona bien, luego de unos 15 minutos el monitor empieza un parpadeo y eso sucede cada vez que lo conecto
Oscar Alf yo hice lo del video pero lo ocupas para la ps4 cierto?
si, pero te repito al inicio funciona muy bien luego de unos minutos empieza a fallar
What should i do?
thx bro u saved ma life xdd
There is no 8th pin in my adapter
Look any other *GND* pin
No work :((
do you have schema
its work with my old macbook , thx a lot
Its work guys try it if you have black screen problem its easy.thanks...1 question now i have problem with the sound do you know what can i do???
GRIGORHS you need to have a adapter with a 3,5 mm sound plug in it otherwise you won't have sound. or you need to plug in you headphones to your controller.
I see in your subscribers that you sub on vesic and balkan tech does it mean that you serbian
It works! Thanks a lot.
cime iam No problem. Glad i could help.
my hdmi don't have 8 pls help me
8 or gnd
why u added the 5v to the converter ?
doesn't it work without it ?
106anaspain no, the ps4 doesn't deliver enough amps for the vga adapter to work wihout.
I found 18 is GND ground wire
18 is not gnd ..18 pin is +5v
Does it still works?
The música 🙉 I had to watch with sound off
Sorry, will use nicer music next time :)
@@AllesOverApparaten it doesnt matter, think its about taste lol
Usb port fix in it
Please with new model...
wow amazing... very useful I tried, this is working now
Wow...if its that easy why the hell don't they just make them all active converters cools stuff
5 v Ac or Dc ?
dc
AC
does this actually work?
yes it does
Alright thanks I fixed the problem though
how did you fix it?
Link de compra do adaptador.?
Name of background song plz
this is pointless - HDMI has already 5V at 18 pin, lol?
Its for something like ps4 which doesnt provide enough power for the converter.
Yes it works thanks bro
Когда сказать ничего не в состоянии, включают идиотскую музыку, да погромче...
this music sounds fine until you realize it was sung by a man
I have this kind of hdmi. Can i add 5v power too?
m.imgur.com/gallery/sy1GiGY
its really work ?
Станислав Крылов yes
Can this damage ps4?
NO if done correctly. however it will possibly short out your hdmi connection port on the console
Will it damage ps4?
I love you
Any proof
Read the other comments for proof.
Ok thank you
Fix USB port in it
It's true I have tried it and works very well
@@AllesOverApparaten sir in my adapter it shows only pin 18. And pin 8 is not there. But instead there is 1 ,3 5,7,9 pin
Can you please give a solution
It work thx alot
damn dude, thanks
fet coele fidoh
Thanks in advance
can you speak german?
Meriiton Gashii Nicht bestimmt, ein bisschen.
AllesOverApparaten ich habe das gleiche problem aber mein konverter ist ein bisschen anders, ich wollte fragen ob du dich vll. damit auch auskennst
können Sie ein Bild Posten? Vielleicht kann ich Ihnen helfen.
wie soll ich ihnen das bild schicken?
schicke das bild zu: allesoverapparaten@gmail.com