NDT PT & MT Acceptance Criteria in Hindi II Penetrant Testing Acceptance Criteria II ASME SEC VIII

Join us on Whatsapp Group for informative posts and job updates: chat.whatsapp....
Here you can get Penetrant testing & Magnetic Particle testing acceptance criteria with Examples.
Subscribe for more videoes like this : shorturl.at/aoqQZ
Please contact us for NDT Level I, II, III Training, Consultancy and Manpower Requirements.
Our Mail ID: [e-mail]
(Bhavy Industrial Testing Services)

[@dasaradhireddy772]

Excellent

[@anarudhakumar705]

Thank you so much sir ,🙏🙏 for better explanations .

[@vaibhavpithava8198]

First of all thanks to you amit sir !
5) not accept
6) not accept
7) accept
8) not accept
9) not accept
10) accept

[@mehzabeenyasin5245]

5 not accept
6 not accept
7 accept
8 not accept
9 not accept
10 accept

[@NDTQuality]

In 8th indications set,
First 6 indication are not acceptable , but 7 number is acceptable

[@NDTQuality]

In 9th number indication set,
If any rounded indication which have length greater then 5 mm, then it's not acceptable (i have not mention length here, so you can't just say acceptable or not acceptable 😀)
And if you consider that if all rounded indications length are less then or equal 5 mm then all rounded indications are acceptable, and linear one is not acceptable

[@NDTQuality]

In 10th set of indications,
I have not mention length, so if any indication having length greater then 5 mm then it's not acceptable, and if all indication having length lesa then or equal 5 mm then they all are acceptable

[@weldlightacademy8536]

Perfect interpretation, good job sir

[@akunshaikh7019]

Thanks sir for this information ....how deep should it be

[@ArifHossain-dk5mc]

sir plase make one video, aws d1.1 table 6.1 mpi acceptance criteria.

[@NDTQuality]

Ok.
I will make one in future

[@Naveenkumar-yn2je]

Excellent explanation Sir 👍

[@rajmanohar223]

Clear explanation

[@vijaynakrani7973]

5. Not Acceptable
6. Not Acceptable
7. Acceptable
8. Not acceptable (only last indication can be acceptable)
9. Data insufficient (last 2 indications aren't acceptable)
10. Data insufficient

[@vineethkumar9613]

Sir , this video is related to asme sec 8 division 1.my doubt is the acceptance criteria will be same for asme sec B31.3 process piping

[@NDTQuality]

I will make video on B31.3 soon

[@anarudhakumar705]

Sir please make video on same

[@anishansari2865]

good

[@matrixknowledge9725]

Sir rounded indication ka measurement kese krte h

[@NDTQuality]

If length is less than or equal to 3 times of width, its rounded indication

[@krishnayadav-uw5en]

GM. Sir
Mera questions hai ten & more indications nowlege chahiye Mujhe Samajh nahi aa raha hai ASME B31.1&3 ?

[@NDTQuality]

Dear,
Pls check this video, I have uploaded it today. You will get solution of your query.
th-cam.com/video/ybssNV9avaY/w-d-xo.html

[@weldingtechnologytechnical4820]

Nice Video Sir

[@rajsekharghorai6851]

5) rounded relevant indication - unacceptable.
6) rounded relevant indication - unacceptable.
7) rounded relevant indication - acceptable
8) alignment Linear indication - Unacceptable
9) unacceptable... Sir, Please explain
10) acceptable

[@NDTQuality]

In 8th indications set,
First 6 indication are not acceptable , but 7 number is acceptable

[@NDTQuality]

In 9th number indication set,
If any rounded indication which have length greater then 5 mm, then it's not acceptable (i have not mention length here, so you can't just say acceptable or not acceptable 😀)
And if you consider that if all rounded indications length are less then or equal 5 mm then all rounded indications are acceptable, and linear one is not acceptable

[@NDTQuality]

In 10th set of indications,
I have not mention length, so if any indication having length greater then 5 mm then it's not acceptable, and if all indication having length lesa then or equal 5 mm then they all are acceptable

[@mdmanir9444]

sir UT Acceptance criteria give us

[@NDTQuality]

Ok, I will make video on it

[@mdmanir9444]

@@NDTQuality Thank you so much sir

[@sonuGupta-rb2xo]

Mpt ka pdf provide kijiy sir ji

[@NDTQuality]

Pls provide your mail ID

[@niranjanparida6010]

Hlo..sir i need notes on pdf

[@NDTQuality]

Please contact me personally using below link
bit.ly/2WpT9HD