Awesome book that gives you step-by-step photos th-cam.com/users/postUgkxTNB_zFBSnTo_O1PqfVUwgi7ityw0JlKt and directions to make every day project. I can see myself making a few of these projects and giving them as housewarming and holiday gifts!
All your labor-saving tricks are giving off serious big brain energy. I especially liked when you drove the screws partway into the supports before lifting them up to the ceiling and clamped all the boards together before staining the edges.
Your room turned out beautifully! We did this for a much larger living room dining room combination. I have to say that our liquid nails and every other kind of Liquid adhesion material we used did not work! Nothing would hold that beat board up there for any length of time. We ended up purchasing a. Sheet rock lift to keep the pieces up while we did the nailing. I joke that it saved my marriage!! It is very difficult working with heavy stuff over your head as you probably know. I will include some pictures. Thanks again for your video. I love the way my ceiling looks and we get tons of compliments! And we never would have thought to do it without you video.😁
You cracked me up hauling lumber in your Pontiac Vibe! I drove one for over ten years and hauled EVERYTHING in it. I loved that little car. You are inspiring!
Excellent video production -> fast enough to get key points across, no annoying audio or dead-spots or weak points of discussion. Beam construction + tips now look easy :) Thx.
Using the 2X4 flame you made, aka a"dead man" was a good trick to push the low areas up. I would not have thought to use one of those for that. Looks really good. Thanks for sharing this,
One of the thoughts I had that I did not see addressed in the comments was with wedging the beam up to conform to the ceiling. I feel if you are putting flex into the beam to attach it to the support, then that flex will carry through to the support and work to loosen it from the drywall and beam above or perhaps promote cracking the support and faux beam..
You did an awesome job, I'm about to cut my sheetrock to install can lights and will probably cover it with this method, it's old popcorn ceilings with beams already there. Glad to see a lady doing this kind of work
Great job Melissa. If you pre drill those holes for your jig, the 1x2 wouldn’t start to crack, also next time slid a piece of that 1/8 inch plywood under your 2x4 jack. Save you scratching your floor. Fine job overall.
We had something similar in my chidhood home. We made the decorative beams and then beat them with a heavy chain across their entire length before staining which gave them a distressed look.
I’m in Australia and I’ve done a lot of research around and removing popcorn ceilings covering it up with this material is the cheapest healthiest alternative to getting rid of popcorn ceilings it’s A genius idea good for you honey🎉
I Love your channel. For being self taught you do an amazing job. I was just thinking about doing this to my living room a few months ago but I got sidetracked with a different remodel but I'll get back to it. Keep up the great work.
Nice work , I love your ideas and skill set How do you keep your hands in such good shape and how did you become interested in doing these projects We do remods, new builds etc Great to see a young women showing off her skill set keep posting
Thank you. We bought a house with popcorn ceilings. We removed the popcorn from a couple of rooms but it just looks horrible because I couldn't smooth out the ceiling very well. I think we're going to do this to all rooms.
Thank you so much for your video. I shared it with my daughter who is also a woodworker but mostly in furniture but she’s trying to figure out a way to make her living room different and I think she would enjoy this one. Thank you again. Great job.
This "popcorn" ceiling finish is in most cases a sprayed-on finish which contains asbestos. Asbestos was widely and commonly used as part of ceiling finish, especially on older homes. Some people hire a licensed asbestos abatement crew to drape furnishings and remove it in a careful manner. Some spray a coating of white or off-white paint to seal the ceiling. Covering the ceiling with faux beams/thin slats will also work.
When you have to use a support to raise the one end of the beam into place, a simple car jack works wonders. The jack from your car would work. A floor jack works even better or a bottle jack. That is the way I do this . Ya did well no matter what. Ya got the beam into place. One other tip, instead of direct wood to wood contact, on the floor, use a thin flexible cutting sheet for veggies, this keeps the floor from being marred by the wood .
Thanks for making this video...your ceiling looks beautiful! Can you tell me what white paint color you used on the ceiling and what your wall color is? Thank you
After watching this I’m going to do this to my rental kitchen player ceiling. Is there a trick to painting the gaps or do you not even see the non painted Sid with the quarter gap ?
As with the porch ceiling I love this idea. So simple and not as expensive. I put river wood wall boards on my ceiling in the master bedroom. I went to the attic and drilled holes to one side of the rafter every 6 feet with a wire coat hanger. Then back to the bedroom I ran a laser line and marked it for reference. The tool you had to find the screws in the ceiling was very helpful and time saving. However, I have plaster and lathe ceiling. Any ideas as to how I can locate the rafters without going into the attic?
So my ceiling is actually drywall installed over crumbling plaster and lathe. Fortunately the folks who installed the drywall found the joists and screwed it in. The magnet still works because it is THAT powerful. I've had friends that have plaster walls use this same earth magnet on a string to find the wall studs. They just swing it next to the wall and it'll show a pull towards where ever the metal is (usually with lathe it's nails) even without having it on the wall.
@@WelcometotheWoodsBlog I'll look into that magnet. I have already removed the plaster, lathes from the outside walls and plaster from inside walls. The ceiling has been the challenge. Thank you for a quick response! I enjoy your channel.
In Modern Living Room Everyone Using "SoundProof Curtains" That Stops Outside Noise by 80% (25 Db) Tested. Check Here: livesoundproof.com/best-soundproof-curtains/
Hey Melissa, love this channel so much. I just want to ask how you got so handy? I have two girls and I watch your videos with my 6 year old so she knows that girls can use tools too. We’re making a folding table for her playhouse together thanks to you. Do you work as well?
Hey Lee! I am self-taught, I start with an idea or inspiration photo, then I research how to accomplish it. I ask people I trust to look over my plans sometimes when I'm really nervous. I learn by watching others, asking questions, and trial and error. The most important aspect of becoming handy is the desire to DIY. If you go for it, you will figure it out! I didn't know how to do anything when we bought our first house years ago. 😊 I do not have a day job, my brand Welcome to the Woods and all it entails is my full time job. I have always stayed home with my kids before that as well.
Olivia was so excited that you responded! You’re a really great role model for her and other girls (if I’m honest you are for me too!) Keep the videos coming! Big love from the UK
Tip: If using real wood and not Faux foam beams, leave at least 16th to a 1/4 of an inch on each side for expansion. if necessary, use a surrounding molding. This will allow the wood to adapt to temp changes and make it easier to install without ruing the surface of the wall.. great job though !!
Just found you! You make everything look so easy. I have been wanting to put some beams in my kitchen area and maybe living room. But I'm not sure if my ceilings are high enough and will make my house appear smaller?? My house I'd only 950 sq ft. Ceiling are only 8ft tall?? Any thought?? Thank you
Looks fabulous, please be mindful of your circ saw cutting method. Don’t have the two sections drop inwards, your blade can bite and you can get very hurt. Love your videos, you are a natural 🎯💯
The only thing that I saw was wrong with the video was when you made your prop you should always put something on the floor first so when you tap it and place it does not SCAR or damage your floor you do awesome work
2 tips. always glue wood joints it will prevent any expansion and contraction gaps throughout the years. I would lay a large tarp down when you are staining on the driveway/ pavement. I once dripped wood stain all over the concrete driveway and it will never come off! rookie mistake
I just purchased a house and there is a large room with faux beams. The room is about 15' x 30' and the beams run the 30' length. I want put up a wall and make this into two rooms, which means the wall will go across the beams. Do I construct the wall around the beams or cut them out and install the frame and sheetrock between the cutout. Thank you for any advise.
Hi there! My name is Ben Ferguson. I love all your videos! I'm very excited because I just bought really my first house. And I really want to change my ceiling to a natural wood plank ceiling. I don't know why I'm having trouble with a contractor he wants to tear down the drywall which I guess I'm okay with but he's starting to sound like a lawyer. Talking about horrible scenarios. A couple questions for you. What are your thoughts and do you ever tech jobs and come out in working people's homes? I would love any help I can get. Keep up the great work! Happy holidays.
I like how it looks !! However two concerns: 1. 1/4 in plywood warps real easy and, 2. You Brad nailed them into just bare Sheetrock ? No stud or backer to anchor them. Why didn’t you use liquid nails to adhere them to the ceiling after a few years they may sag or fall out. Anyway it looks amazing! You by far are an amazing lady. I like your style.
Awesome book that gives you step-by-step photos th-cam.com/users/postUgkxTNB_zFBSnTo_O1PqfVUwgi7ityw0JlKt and directions to make every day project. I can see myself making a few of these projects and giving them as housewarming and holiday gifts!
All your labor-saving tricks are giving off serious big brain energy. I especially liked when you drove the screws partway into the supports before lifting them up to the ceiling and clamped all the boards together before staining the edges.
You definitely have a knack for creativity Melissa! Awesome work and may Jesus Christ bless you and your precious family!
Your room turned out beautifully! We did this for a much larger living room dining room combination. I have to say that our liquid nails and every other kind of Liquid adhesion material we used did not work! Nothing would hold that beat board up there for any length of time. We ended up purchasing a. Sheet rock lift to keep the pieces up while we did the nailing. I joke that it saved my marriage!! It is very difficult working with heavy stuff over your head as you probably know. I will include some pictures. Thanks again for your video. I love the way my ceiling looks and we get tons of compliments! And we never would have thought to do it without you video.😁
You cracked me up hauling lumber in your Pontiac Vibe! I drove one for over ten years and hauled EVERYTHING in it. I loved that little car. You are inspiring!
Had one too! Loved it, if they still made them, I’d still own one, if they still partnered with Toyota!
Your natural engineering skills are amazing. Your beams look great and accent the room. Nice job.
Atta Girl! On a budget I used to haul all sort of wood and reno material in my Versa Note hatchback. Amazing what you can fit in!
I love the sound of your voice. It's very soothing.
Excellent video production -> fast enough to get key points across, no annoying audio or dead-spots or weak points of discussion. Beam construction + tips now look easy :) Thx.
Using the 2X4 flame you made, aka a"dead man" was a good trick to push the low areas up. I would not have thought to use one of those for that. Looks really good.
Thanks for sharing this,
The dead man was a great idea.. not protecting the floor though EGAD!!!
Damaging the drywall on its way up and the damage to the floor, not everyone should be putting out instructional videos. Just saying.
One of the thoughts I had that I did not see addressed in the comments was with wedging the beam up to conform to the ceiling. I feel if you are putting flex into the beam to attach it to the support, then that flex will carry through to the support and work to loosen it from the drywall and beam above or perhaps promote cracking the support and faux beam..
Looks amazing. A small automotive floor jack is an easy way to press stuff like that into the ceiling before screwing.
So far every video I've watched I've learned some cool tips and tricks. This girl is smaaart!
woo, that was really smart idea, great job. looks awesome.
This is such a cool idea and you did a great job! Only just today had the mind blowing realization that one could decorate their ceilings. Love it.
You are like an intuitive engineer. So cool. Bravo!
You did an awesome job, I'm about to cut my sheetrock to install can lights and will probably cover it with this method, it's old popcorn ceilings with beams already there. Glad to see a lady doing this kind of work
Great job Melissa. If you pre drill those holes for your jig, the 1x2 wouldn’t start to crack, also next time slid a piece of that 1/8 inch plywood under your 2x4 jack. Save you scratching your floor. Fine job overall.
Lady you are a so so hard worker, and your living is so beautiful, congratulations 🙂
THOSE BEAMS LOOK GREAT WITH THAT CEILING !!!!
Thanks!
We had something similar in my chidhood home. We made the decorative beams and then beat them with a heavy chain across their entire length before staining which gave them a distressed look.
Working on a house that old must have some interesting challenges. Thanks for sharing!
It sure does lol
Great job! A word of warning, be careful nailing through your ceiling since you have no idea if there are any wires just laying above it.
Been there done that!! It was NOT pretty
How can you tell if there are wires there? Is there some kind of wire detector one could get?
@@jessicabonilla6127 by using a wire tracer. Or, look in the ceiling if possible. Either way, DO NOT drill blindly into your ceiling.
@@jessicabonilla6127 yes they sell detectors!
@@jessicabonilla6127 Yes. They are a little pricey but a good quality stud finder has other settings that detect wiring or plumbing.
Such a good idea to cover those popcorn ceilings 😯
Hey, Mellissa. Great work. My wife was talking about doing something like this to our popcorn ceiling. Thanks for posting.
I’m in Australia and I’ve done a lot of research around and removing popcorn ceilings covering it up with this material is the cheapest healthiest alternative to getting rid of popcorn ceilings it’s A genius idea good for you honey🎉
You're a natural carpenter!!!❤ looks great!!
I Love your channel. For being self taught you do an amazing job. I was just thinking about doing this to my living room a few months ago but I got sidetracked with a different remodel but I'll get back to it. Keep up the great work.
I'm always impressed with your craftsmanship
Nice work , I love your ideas and skill set
How do you keep your hands in such good shape and how did you become interested in doing these projects
We do remods, new builds etc
Great to see a young women showing off her skill set keep posting
Thank you. We bought a house with popcorn ceilings. We removed the popcorn from a couple of rooms but it just looks horrible because I couldn't smooth out the ceiling very well. I think we're going to do this to all rooms.
Beautiful! My husband wants to do this. U made it simple. I am sure I want this look now also. Thanks for the wonderful tutorial 😍😍
Thank you!! 😘
What are the sizes of those beams?
Fantastic! Great way to add visual appeal to the ceiling.
Congrats!! It was very nice and I’m impressed that you did it yourself. You inspire me!
You are truly ambitious and have mad talent!
Thank you so much for your video. I shared it with my daughter who is also a woodworker but mostly in furniture but she’s trying to figure out a way to make her living room different and I think she would enjoy this one. Thank you again. Great job.
You are incredible !!!! What a fantastic job you did !!!!!!!!! Looks awesome !!!!!! Congrats !!!!!
Your work is AMAZING! What a difference!!
This "popcorn" ceiling finish is in most cases a sprayed-on finish which contains asbestos. Asbestos was widely and commonly used as part of ceiling finish, especially on older homes. Some people hire a licensed asbestos abatement crew to drape furnishings and remove it in a careful manner. Some spray a coating of white or off-white paint to seal the ceiling. Covering the ceiling with faux beams/thin slats will also work.
Do you know when the use of asbestos stopped?
Did you go to any carpentary school. You are awesome. Love you channel. Can watch all day long for ideas. Thanks for sharing
I did not! Thanks for watching.
When you have to use a support to raise the one end of the beam into place, a simple car jack works wonders. The jack from your car would work. A floor jack works even better or a bottle jack. That is the way I do this . Ya did well no matter what. Ya got the beam into place. One other tip, instead of direct wood to wood contact, on the floor, use a thin flexible cutting sheet for veggies, this keeps the floor from being marred by the wood .
Beautiful work as always. You are amazing and you do beautiful work! 😊
Hey thanks for the new video Melissa, a subscriber from the United Kingdom.
This is my dream girl. You are amazing! keep up the awesome videos.
What a transformation looks fabulous I love it fantastic job
Absolutely beautiful!! My taste exactly
Hi Melissa,
I absolutely love how it all came out .
The Pontiac Vibe/Toyota Matrix was a pretty good car! I had one from 2007 to 2014
Based on seeing this video (never saw your channel before) I subscribed! Very well done and exactly what I hoped to find! Thank you!
Thanks for making this video...your ceiling looks beautiful! Can you tell me what white paint color you used on the ceiling and what your wall color is? Thank you
You did a fantastic job. It looks great!
Nice job! The ceiling turned out great.
Put a piece of rubber drawer liner under the 2x4 T holder that supports the beam so you don't scratch floors.
I subscribed.. me and my wife are remodeling our house together .. you do some great work!
They look awesome..great job and thanks for the details...
After watching this I’m going to do this to my rental kitchen player ceiling. Is there a trick to painting the gaps or do you not even see the non painted Sid with the quarter gap ?
We use faux beams in our luxury custom homes as well!
It came out amazing 😱 great job
Can you give a little bit more detail on what kind of wood you used for the planks I am new to DIY
As with the porch ceiling I love this idea. So simple and not as expensive. I put river wood wall boards on my ceiling in the master bedroom. I went to the attic and drilled holes to one side of the rafter every 6 feet with a wire coat hanger. Then back to the bedroom I ran a laser line and marked it for reference. The tool you had to find the screws in the ceiling was very helpful and time saving. However, I have plaster and lathe ceiling. Any ideas as to how I can locate the rafters without going into the attic?
So my ceiling is actually drywall installed over crumbling plaster and lathe. Fortunately the folks who installed the drywall found the joists and screwed it in. The magnet still works because it is THAT powerful. I've had friends that have plaster walls use this same earth magnet on a string to find the wall studs. They just swing it next to the wall and it'll show a pull towards where ever the metal is (usually with lathe it's nails) even without having it on the wall.
@@WelcometotheWoodsBlog I'll look into that magnet. I have already removed the plaster, lathes from the outside walls and plaster from inside walls. The ceiling has been the challenge. Thank you for a quick response! I enjoy your channel.
Beautiful work.
Really great video and super awesome ideas.
Nice job. But what did those 2 inch brads anchor into ?
This would be so cute and cozy in a bedroom!
In Modern Living Room Everyone Using "SoundProof Curtains" That Stops Outside Noise by 80% (25 Db) Tested. Check Here: livesoundproof.com/best-soundproof-curtains/
This came out really nice
This is so amazing! I got tired just watching you!😁
great video! Thank you for being so specific and showing your steps.
Looks great! Good work!
Hey Melissa, love this channel so much. I just want to ask how you got so handy? I have two girls and I watch your videos with my 6 year old so she knows that girls can use tools too. We’re making a folding table for her playhouse together thanks to you. Do you work as well?
Hey Lee! I am self-taught, I start with an idea or inspiration photo, then I research how to accomplish it. I ask people I trust to look over my plans sometimes when I'm really nervous. I learn by watching others, asking questions, and trial and error. The most important aspect of becoming handy is the desire to DIY. If you go for it, you will figure it out! I didn't know how to do anything when we bought our first house years ago. 😊 I do not have a day job, my brand Welcome to the Woods and all it entails is my full time job. I have always stayed home with my kids before that as well.
Olivia was so excited that you responded! You’re a really great role model for her and other girls (if I’m honest you are for me too!) Keep the videos coming! Big love from the UK
@@leemellor2108 Aww yay! That makes my day :)
L@@WelcometotheWoodsBlog
Hey love the video! What color name is the grey paint on your walls? I’ve been looking for a grey color for my room and this color is perfect!
Great job..very nicely done..Thanks for sharing
Tip: If using real wood and not Faux foam beams, leave at least 16th to a 1/4 of an inch on each
side for expansion. if necessary, use a surrounding molding.
This will allow the wood to adapt to temp changes and make it easier
to install without ruing the surface of the wall.. great job though !!
Impressive! Nicely done!
Beautiful!
I like the idea and look; good job. My ceilings are vaulted and I am unsure how to do this in our home. ☺️
Just found you! You make everything look so easy. I have been wanting to put some beams in my kitchen area and maybe living room. But I'm not sure if my ceilings are high enough and will make my house appear smaller?? My house I'd only 950 sq ft. Ceiling are only 8ft tall?? Any thought?? Thank you
Looks fabulous, please be mindful of your circ saw cutting method. Don’t have the two sections drop inwards, your blade can bite and you can get very hurt. Love your videos, you are a natural 🎯💯
The only thing that I saw was wrong with the video was when you made your prop you should always put something on the floor first so when you tap it and place it does not SCAR or damage your floor you do awesome work
yeah, I would've made something using a car jack stand, but that's just me though, gives me a reason to build something else.
Great work ! But did your floor have any damage after hitting the wood to press the beam up ?
I know, thought the same. I would have cut brace board much shorter and used in conjunction with car jack on floor to force beam up to ceiling
If the beams are being supported by the joists what are you nailing your planks into?
Thanks! Great work
Fantastic work ! Thanks for sharing. 😍
Girl you got skills!!!!!
Idk why I watched the whole video... my ceiling is made out of concrete and steel beams hahaha 🤣
owesome. But Is it heavy for hanging on ceiling ? youre not scare of falling down ??
Super cool. For the t tool you may want to throw an inside down piece of carpet so it doesn’t damage your floor
Great job girl!
Looks great! Very clever
Simply... beautiful and creative!
Did you consider toggle bolts instead of dealing with the wonky joists?
2 tips. always glue wood joints it will prevent any expansion and contraction gaps throughout the years. I would lay a large tarp down when you are staining on the driveway/ pavement. I once dripped wood stain all over the concrete driveway and it will never come off! rookie mistake
Love it. Turned out gorgeous.
I just purchased a house and there is a large room with faux beams. The room is about 15' x 30' and the beams run the 30' length. I want put up a wall and make this into two rooms, which means the wall will go across the beams. Do I construct the wall around the beams or cut them out and install the frame and sheetrock between the cutout. Thank you for any advise.
Hi there! My name is Ben Ferguson. I love all your videos! I'm very excited because I just bought really my first house. And I really want to change my ceiling to a natural wood plank ceiling. I don't know why I'm having trouble with a contractor he wants to tear down the drywall which I guess I'm okay with but he's starting to sound like a lawyer. Talking about horrible scenarios. A couple questions for you. What are your thoughts and do you ever tech jobs and come out in working people's homes? I would love any help I can get. Keep up the great work! Happy holidays.
Awesome job. Thanks for sharing 👍 😊
Killed it. Good job
It looks fantastic!
I like how it looks !! However two concerns: 1. 1/4 in plywood warps real easy and, 2. You Brad nailed them into just bare Sheetrock ? No stud or backer to anchor them. Why didn’t you use liquid nails to adhere them to the ceiling after a few years they may sag or fall out. Anyway it looks amazing! You by far are an amazing lady. I like your style.
You are AMAZING and inspiring!!!
I admire you. Job well done!
Very impressive!!!!