STOP “Before” your winch breaks

Winches on CAT, DEERE, Komatsu, and any other dozer are rated for maximum line pull. They do not have redundancy ratings like many crane, hoist, or marine winches. Having a sensor to tell you when you are getting close to that maximum load is key, especially on PTO winches.

[@lembriggs1075]

I’m so glad that you care so much for your customers.

[@Stoparts]

Bravo colleagues, cool channel and content

[@RichardJW1]

very interesting! many thanks

[@laneburgess1643]

Great video.

[@crimson5288]

this is very informative

[@pricetag30]

Ya but i like to pull stuff until it snaps!

[@treashurehunter800]

Do you have any smart shackles in stock? Are they maranized?
You're using some sort of dielectric paint to interact with the sensor nodes. Will this function and salt water application for Marine salvage work? Do you offer one in that line? I appreciate from hearing from you thank you very much.

[@alimoenadisoepardi7996]

Where can I buy a winch which country is this cause I am from Suriname a country from South America where can I go online to buy

[@Guust_Flater]

Can you set a load alarm i.e. a buzzer or led ? So if you set it to 100T it will give an alarm.

[@angelsalas3357]

Hi.. I ned held to my winch is working in the 518 cat.. Is to hard to pull when is free.. I ajust de break bat not we need 3 pearson to pull de cable

[@thomsonequipmentdozerwinch]

What model winch is on your 518? Send us an email [e-mail]

[@maskeenabbasi9319]

❤❤❤ good

[@user-wc1hp5dw1s]

Thomas equipment do you have any gear o matic winch for 64 international td-340a dozer from travis

[@thomsonequipmentdozerwinch]

Send an email to [e-mail] we can help you find a winch

[@lonnielemaster7053]

Would you have or happen to know where I could find a adapter bracket for a Gearmatic 19 to a 450C case dozer

[@thomsonequipmentdozerwinch]

We support a lot of gearmatic winches helping owners make repairs to the internal components. Finding the mounting brackets for a specific install is really tricky on the old stuff. Nothing in stock right now for Gearmatic 19 brackets to bit Case 450C. Small winches are tough. You can find more information here: dozerwinchparts.com/blog/small-dozer/
Sorry, we can't help at this time.

[@wilmamcdermott3065]

You have winches do u have any older dozers? Iam looking for parts to restore an old D7

[@thomsonequipmentdozerwinch]

We used to have a fleet of rental equipment and inventory of dozers, but we currently have limited dozer stock on hand. We do have some parts available. Please e-mail what you're looking for to [e-mail] and we will try and assist.

[@warpedbeyondhelp]

Winch availability for my 1949 HD5 track loader? E24 or an ea possibly?

[@thomsonequipmentdozerwinch]

Bad news….. those are nearly impossible to find in working condition that are complete with all the install parts. Might be one out there somewhere but we don’t have one unfortunately

[@StumpjumperVideosPA]

great idea how much ?

[@thomsonequipmentdozerwinch]

Prices range wildly when looking at capacity and features as some include data recording and extra software. We currently have a 13.5 ton shackle that's shown at the end of the video in stock for $2,500 certified by the manufacturer (only 1 avail). The shackle and load sensing unit are working rated at 13.5T, but the rated failure point for both is over 50 Ton if your pulling situation safely allows. We can do larger shackles rated for big loads as well but they get heavy and costly in a hurry. Some of the larger ones with recording devices can exceed 10,000 USD.

[@Jamestreeman]

Would this work on my crane

[@thomsonequipmentdozerwinch]

If you're asking about the smart shackle for use on a crane the answer is YES. The sensor sends a signal to the display showing load. It will tell you the load being pulled or hoisted regardless of vertical or horizontal orientation. It works really well in increments of 100 lbs.

[@Jacob-zd4gj]

I currently have a dramatic 19 winch on the back of my international td8. Where could I get parts or a part breakdown. Mine doesn't seem to pull very smooth

[@thomsonequipmentdozerwinch]

th-cam.com/video/GkzlrthwzkQ/w-d-xo.html
I can send you a manual and the parts breakdown of the gearmatic 19. Shoot me an email [e-mail]

[@thomsonequipmentdozerwinch]

dozerwinchparts.com/content/MODEL%2019%20Gearmatic%20USE%20THIS%20ONE%20W%20BRADEN%20NUMBERS.pdf

[@thomsonequipmentdozerwinch]

There is a link for the PDF as well. I suggest you review our other video on the Gearmatic 19. (there a couple of parts you REALLY do NOTwant to damage)

[@nikhiljangid2776]

Is hydraulic branch ki price kya hai address kya hai WhatsApp Karen

[@thomsonequipmentdozerwinch]

Hydraulic winches are normally cheaper to buy, and more costly to install. It really depends on the model and tractor configuration though.