@@thevoyagerv4499 What? I’m talking about a separate video entirely for comp experienced players that would cover different things. This video is for new players. Did you even think about what you were typing? Lol.
@@zouzou_u I meant what I said, there's no need for a video for experience/experts when they should know all the setups/binds etc already. No need to write a paragraph xd.
i tried downloading sourcemod, but the utility binds u gave dont work. maybe its because i downloaded a newer version of sourcemod without the commands, but i dont know yet (and yes i did remove the // at the start)
@SwitchPie -novid : removes the valve on the guy intro at the beginning of launch -high : sets game priority to high (don't use it) +mat_motion_blur_percent_of_screen_max 0 : removes all motion blur on screen -lv : sets game to low violence mode which decreases gore alot and removes blood on screen
@@rax0x0 This is some old "pro tip" floating around the web for ages. The potential performance benefit is really small and as general measure it's never recommended to change the priority of games. A well optimized game takes all the resources it needs anyway and such measures shouldn't be needed.
For some odd reason whenever I start up L4D2 now, it says I have -insecure in the launch options, preventing me from joining regular VAC servers. However I have looked back in properties and noticed that nothing relating to that is typed out in launch options Is there a way to fix this?
If you right click the vid and go to stats for nerds you can see the content loudness is -32.8db which is incredibly low, which is why this video is so hard to hear lol sick guide tho man! thanks for doin this!
same question, i wanted to know how to make my game look flat and disable the dynamic shadows on survivors, common, etc. ever find it out? WITHOUT turning effects to low
hey man i used your autoexec and changed things so it can be more original can i put your that autoexec (with my own changes) in one of my videos to some people download it?
Hoping to get some info commenting on an older thread. I did everything but autoexec and my display is flickering slightly. I'm running on dual gtx770 in sli and the only thing I have setup different is enabling multiple cores due to my setup. Any advice to get the flickering to go away?
@@prsto I noticed putting the game into full-screen with all added settings gave me 200+fps, however I get the screen flicker. With it in windowed-borderless mode I got 80fps average. Reset to default settings and just doing full screen, with some graphics lowered, I was able to achieve 120 steady fps with zero flickering. Thank you for the help!
Hey, how does ping work in pro matches? I see the ping is shit for one team and great for the other, and then the next round they swap? I'm talking about the QUARANTINE CUP Round 1 POV vs duplex match you uploaded. What's that about? Also, dope video, I'm a TF2 player but I like watching Pro lfd2 anyway.
when two teams of different geographic locations play each other they can 1) play 1 game on a server where they both get equal (probably shit) ping, or 2) play a game on one team's server and then a game on the other's server (as long as average pings are relatively equal). The scores from both games are basically added, or a team can call gg at any point they want (such as losing on their home server)
To new comers, Do NOT use -high launch parm. This command basically sets your game affinity to high and that can easily back fire with overall system instability ( you make your game hog more of the cpu power than it needs ).
1. Right click the file 2. Select 'Open with' 3. Select Notepad (or any text-editing software) If you never knew how to do this before, then let me fill you in on something... A LOT OF FILE TYPES CAN BE READ AND WRITTEN WITH NOTEPAD.
competitive play...lol. All you have done is tamper with a game that gives you an edge, and other players a non fair chance. Your generation of gaming sucks. So the moral here is. Cant play and don't want to take the time and learn. But hey, here are some configs that will make you better than you really are. You kids are so sad.
@@prsto Oh thank you for responding so cheeky. Deny deny and more deny with silly response with no substance. I actually expected….just that. Cheers Have a great life kiddo at being something you’re not.
![[#2024MAMA] BIGBANG (빅뱅) - 뱅뱅뱅 (BANG BANG BANG) + FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/EQsYfiPR9uM/mqdefault.jpg)
man what you're doing for the new fellas is actually amazing, keep it up!
thanks for the video prsto!
Now we need Basic Competitive L4D2 settings for experienced/expert players.
hey you came here too
@@tahakarakas3983 Supporing the L4D2 Community :D
They should know everything already themselves, otherwise they're not really experienced or experts.
@@thevoyagerv4499 What? I’m talking about a separate video entirely for comp experienced players that would cover different things. This video is for new players. Did you even think about what you were typing? Lol.
@@zouzou_u I meant what I said, there's no need for a video for experience/experts when they should know all the setups/binds etc already. No need to write a paragraph xd.
nice settings bro, I love how the game looks bad but not to bad, I'm happy i found someone else who likes having theyre games look bad.
thanks a lot dude, i have been trying to set autoexceg for like 1 hour until i saw ur tutorial
Very helpful video :D. Now my game is much more smooth and i can enjoy the gameplay without worrying about my fps
What a well made video, thanks bud
i tried downloading sourcemod, but the utility binds u gave dont work. maybe its because i downloaded a newer version of sourcemod without the commands, but i dont know yet (and yes i did remove the // at the start)
Launch options commands: -novid -high +mat_motion_blur_percent_of_screen_max 0 -lv
@SwitchPie -novid : removes the valve on the guy intro at the beginning of launch
-high : sets game priority to high (don't use it)
+mat_motion_blur_percent_of_screen_max 0 : removes all motion blur on screen
-lv : sets game to low violence mode which decreases gore alot and removes blood on screen
@@davey5867 why should I not use -high?
@@rax0x0 fucks the heck out of your pc with using more cpu and ram
@@rax0x0 This is some old "pro tip" floating around the web for ages. The potential performance benefit is really small and as general measure it's never recommended to change the priority of games. A well optimized game takes all the resources it needs anyway and such measures shouldn't be needed.
Thxx @@BenniRoR
thanks for settings man, it's really helpfull. Hope you gonna make more videos :)
I appreciate this super helpful!
Thanks man. Picked out the bits I wanted for my own config. This was a super useful reference.
thank you so much my fps 60 now on 200 :D
I have problems with my thing when l pick up axe swich out my sniper to melee and l keep my pistol
my man giving me an asmr whisper episode
definitely should've reuploaded the minute I discovered the sound levels
For some odd reason whenever I start up L4D2 now, it says I have -insecure in the launch options, preventing me from joining regular VAC servers. However I have looked back in properties and noticed that nothing relating to that is typed out in launch options
Is there a way to fix this?
Nicely done thank you.
Can you do a tutorial for how not to rage in pubs?
On a serious note, what do you think about realism versus? You ever do that_?
nah ive never really done realism versus but there's nothing wrong with it
It’s a video game. You don’t need a video on that bud
If you right click the vid and go to stats for nerds you can see the content loudness is -32.8db which is incredibly low, which is why this video is so hard to hear lol
sick guide tho man! thanks for doin this!
Subbed for keeping this game going.
What audio settings would you reccomend for a high end headset?
thx for the video man, you help me so much ! loviu man
How do the pros make their game so bright, like normally sometimes you get after getting revived in campaign?
same question, i wanted to know how to make my game look flat and disable the dynamic shadows on survivors, common, etc. ever find it out? WITHOUT turning effects to low
I had to turn my headphones all the way up to 100 to hear anything.
fully aware sorry
Harambe here. Thanx for the VOD
Thank you😀
Thanks! Already knew all of that, but my rate is set on 30 000, not 100 000. Does this matter?
would these be fine to use in vanilla as well? not including the interp of course
hey man i used your autoexec and changed things so it can be more original can i put your that autoexec (with my own changes) in one of my videos to some people download it?
sure man it's your config after all
@@prsto Hey, presto, the video is from 4 years ago, is it still the same today?
so i set my anti aliasing mode to none and it just crashes me
Hey presto,
how did u get that crosshair pls ? (the white cross that u have when you are streming)
do I need autoexec specificly?
Same options are under config.cfg (I only cannot find 'rate' there, can I put it in config file?)
config.cfg does not = autoexec.cfg
autoexec.cfg is specific regarding commands that will run at the start of every time you launch the game
Is there a list for all the available launch options?
Sir mine is too dark when i play in other maps. How can i adjust?
Go into Brightness Settings Then Set it to light.
steamcommunity.com/sharedfiles/filedetails/?id=954836428 might help you
reshade
Hoping to get some info commenting on an older thread. I did everything but autoexec and my display is flickering slightly. I'm running on dual gtx770 in sli and the only thing I have setup different is enabling multiple cores due to my setup. Any advice to get the flickering to go away?
i have zero experience with SLI and l4d2 so it's hard to say, maybe try each gtx770 individually just to see
@@prsto I noticed putting the game into full-screen with all added settings gave me 200+fps, however I get the screen flicker. With it in windowed-borderless mode I got 80fps average. Reset to default settings and just doing full screen, with some graphics lowered, I was able to achieve 120 steady fps with zero flickering. Thank you for the help!
do we copy the file to our autoexec or im confused
where did you get the text format from? i use strawberry and wanna use another
nice and easy tutorial
Hey, how does ping work in pro matches? I see the ping is shit for one team and great for the other, and then the next round they swap? I'm talking about the QUARANTINE CUP Round 1 POV vs duplex match you uploaded. What's that about? Also, dope video, I'm a TF2 player but I like watching Pro lfd2 anyway.
when two teams of different geographic locations play each other they can 1) play 1 game on a server where they both get equal (probably shit) ping, or 2) play a game on one team's server and then a game on the other's server (as long as average pings are relatively equal). The scores from both games are basically added, or a team can call gg at any point they want (such as losing on their home server)
@@prsto Gotcha thank you! I figured it was swapping servers, makes sense.
You mention at 2:37 that, "raw input 0 is bad"? I thought rawinput is good? I guess "raw input 1" enables it?
Yep you got it, raw input 1 is good/on
thank you man!
Bless!
what ur font in l4d2?
Does anyone have the link to this resident evil menu (UI) mod?
nice video, glows?
Great job prsto!
fonts?
Can I skip the Autoexec part or is it required?
what edit note program did u use for de cfg?
Can we get comp settings for non new player
hey can i know what theme u have in vscode ?
What DPI setting do you have?
To new comers, Do NOT use -high launch parm. This command basically sets your game affinity to high and that can easily back fire with overall system instability ( you make your game hog more of the cpu power than it needs ).
It's only useful for PCs that are running 300 processes of malware in the background
hey dude, what if i use windowed and borderless? does it help?
its better to use fullscreen
-novid -high +mat_motion_blur_percent_of_screen_max 0 -lv for lazy gang but if it not work i wll see a misstakes just rep
When i enable vertical sync, i cannot bunnyhop and vertical sync on lowers my frames tremendously. I also have a good pc
Quicksand book font download pls
What addons are you using
dude bought all of steam
Hey prsto, is it possible to change fonts in l4d2 if so how?
can you please tell me what font you have on
Quicksand Book
Ty :)
is this work with L4D1...
Thx prsto
Nice
it said harm
BIG VIDEO
Ayo, is that my font you're subscribed to?
what dpi
crosshair?=
yor in sa guy yaa yaa ma taboo doon doe miss icker or ick me ick?
English?
@@FilliamPL inger he he hoo he hockey
Are you even real, John?
@@FilliamPL Koren es ka totto me es yos como estas pe jabla korteeno me more ocko che chicken sour cream.
You are an astonishing fellow, Jose. I am glad you are a being who exists in my timeline.
Wooohoooo no dislikes :)
เล่นทีเครื่องพัง
autoexec?
How do you open the cfg?
1. Right click the file
2. Select 'Open with'
3. Select Notepad (or any text-editing software)
If you never knew how to do this before, then let me fill you in on something... A LOT OF FILE TYPES CAN BE READ AND WRITTEN WITH NOTEPAD.
pass me your launch parameters plea
updated the description with them
PLEASE speak up you are so damn quiet
competitive play...lol. All you have done is tamper with a game that gives you an edge, and other players a non fair chance. Your generation of gaming sucks. So the moral here is. Cant play and don't want to take the time and learn. But hey, here are some configs that will make you better than you really are. You kids are so sad.
ok have a nice day
@@prsto Oh thank you for responding so cheeky. Deny deny and more deny with silly response with no substance. I actually expected….just that. Cheers Have a great life kiddo at being something you’re not.
@@ThrowingStones32 ok i will, stay upset
@@prsto sad millennial.
Cry about it
Do you think there's any competitive advantage to have trilinear vs bilnear filtering mode?
I believe personal preference there mostly
fonts?
how do i get the font g?
nice