Preview of the XSonic ULooper
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- I've been beta testing XSonic's ULooper pedal for a while now and they have allowed me to share this preview of the product with you. Please read the pinned comment as I am updating it with facts/answers that I neglected to put into the video.
Please pardon the poor guitar playing in this video. I stopped playing for 20 years and I'm practically a beginner again.
If you have any questions after the video, please leave a comment and I will do my best to answer them.
The riff used in this video is based on Jessie's Girl by Rick Springfield. If you ever come across this video Rick, I hope you don't come down too hard on me for how I played it.
#positivegrid #sparkamp #guitar #guitargear #xsonic #looper #looperpedal - เพลง
I forgot to mention these facts:
1. Total recording time is 3 hours.
2. It allows unlimited overdubs.
3. Since the ULooper uses the USB In/Out of the Spark amps, it is a makeshift FX loop and you can change tones/effects for overdubs.
4. The ULooper can charge the Mini and Go. This requires a charger that outputs at least 1A.
5. You can now use the Spark as an onstage monitor by using the line out to a PA. It does not cut the Spark speakers off like the headphone out does.
@@gaittec Yes, that is a great feature of the line out from the ULooper. I think I covered that in the follow up video. I know I covered using the line out. Not sure I said the speaker would continue work.
@@Raskull Thanks for the second video.
@@gaittecMy pleasure.
Does it just loop in the cab or from both
I thought about buying one of these but never did. I have ordered the Spark 2 now but this is still an interesting solution. When I checked i saw it on Amazon for $125 which is obviously half the price of the Spark 2 so great option for anyone that owns a Spark 40. Main reason i went with a more expensive solution is i use my Spark in the living room as it is less conspicuous than a normal guitar amp. If i start adding power sources and USB cables it would start to look a little messier and more conspicuous.
I totally understand. I also preordered a Spark 2 and will be using it with my Positive Grid wireless pedal.
I assume you can't save loops for later use?
You are correct. Currently does not have a feature to upload/download the loop (it's only 1 loop with unlimited overdubs).
Just ordered one.
That’s cool. I hope you enjoy it!
Does the looper allow you to change the tone of what you’re looping? (So you lay down a first loop with one tone and then overdub with a different tone?)
Would be great if you contrasted with the Loopy app that works with the xsonic pedal
While I didn't answer that in the video (my mistake), I made sure I covered it in the pinned comment. You can change tones. I will cover it more in a follow-up video. As for contrast with Loopy app and Airstep SPK, I can't since I don't have an Airstep SPK. I have heard that the Airstep does limit the ease of tone switching.
Check out the follow up video for the tone change demo.
I might have missed it (reading comments while the video played - bad habit), but the actual audio comes out of the speaker of whatever Spark amp you are using, right? Then I presume if I plug in headphones to the Spark amp, same thing, yes? Apologies for the basic question.
Good question: The headphone would cut the Spark speakers out like always; but, you would likely still get the line out to PA. I am a beta tester and I'll check this. If it works, the headphones would be like an IEM.
This is correct. Just tested it out. Headphone out works fine with the ULooper. Speaker to the Spark Amp is turned off when something is plugged into it. The headphone/line out can be used to go to a powered speaker, like the Spark Cab or a Headrush, or to a PA system. Keep in mind that the Spark 40 does not have the ability to change the output to Line Out like the Mini and Go do.
I wonder what kind of signals the looper pedal loops when plugged in to the new multi-instrument amp, Positive Grid live. Just one channel, all the channels, line in playback?
Great question. From what XSonic is telling me the Live outputs a combined feed to the USB out. So the ULooper would loop whatever was coming from all 4 input channels at the same time. They did say they were able to loop/overdub guitars, vocals and bass by recording them one at a time.
Just got mine but when powered it is solid purple and then flashes red. Then resets. Any thoughts? Updated firmware and followed connection instructions. Thanks!
It sounds like either all the connections aren’t made or the amp isn’t on.
Hi! Thanks for the presentation. Great job. But allow me one comment please: I think the main point of this hear is to offer me an fx-loop.
You are completely correct. I dropped the ball on that one. I am posting a video up tonight with a proper loop/overdub with changing tones via a Spark Control pedal, that covers any other points I missed, and answers all questions I have received so far.
@@Raskull very good. And you can also mention, that via a later update you can use it with the boss katana 50mk2 👍🏻
@@amir.zolghadr I can't talk to anything that is not publicly released information. When and if other amps will be supported, I will do another follow up.
I am also fortunate enough to be a Beta Tester for the ULooper. I've had success with most aspects of it, but I have a hard time with timing the loops. I seem to get a noticeable crossover gap between the end of one loop and the start of the next.
It appears you have the timing down. So, I'll work on that, lol
Thanks for this video.
Thanks for watching (and hopefully subscribing). Timing is everything in looping. That took 3 tries to get the loop down. And while that loop wasn't perfect, it was close enough. It avoided the gap and I think I even avoided the hard strum on the 1 count.
@@RaskullIt shows me that the ULooper is capable, and that I need to do the work, lol. Beyond that, I find it a great solution for Spark users.
I purchased the Airstep Spark Edition and attempted to use the Looper mode with Android, and it was glitchy at best. Too much going on between the Airstep and laptop.
This ULopper is so much of a better solution.
@@jeffmaccaglia8998 I couldn't agree more. When I heard about the ULooper I was so happy to not have to use a table and stuff for looping. Now I use the Spark Control to change tones/effects and the ULooper to record practice loops. A near perfect practice solution. Especially with the Mini and Go.
I'm also in the test group and like you, struggling with the timing a bit. I've noticed some 'anomalies' in the playback as well but the XSONIC folks seem to be very active in addressing these issues. I haven't tried the latest firmware yet, but so far, (other than *my* limitations) it's working well with both my 40 and my Mini.
@@rotorav8r If you have trouble with the timing I would recommend a metronome. I was in the music business and did lights for rock bands, so I count the beats in my head naturally. I still use a metronome from time to time and it really helped me improve my timing for starting and stopping loops on the 1. Also practice tapping your foot while playing a few bars before you record the loop. Tap close enough to the pedal and you can just pivot your foot for the 1 tap. Just be aware that sometimes we overcompensate our strums on the one when we press on the looper button.
How is this any different than a standard looper? will it play 2 dubs with different tones? That is what spark users have been missing
While this was answered in the pinned comment, your question may be best answered by watching my follow up video. th-cam.com/video/cm36kCGc7XI/w-d-xo.html
That's it. Just purchased one based on your videos! Thanks for the preview and info!
Thanks for letting me know. I hope you enjoy it. I can't wait to get my retail unit.
Looks good,
Thank you for watching and subscribing. Stay tuned for my giveaway show(s) once the channel gets to 1,000 subscribers.
Where and when can we order this?
They aren't released yet but it will be sold by xsonic
Hopefully very soon and initially from XSonic's website. Stay tuned and I will post a short video with the cost and availability as soon as I know.
@@tehcarey Thanks for watching and helping answer questions.
I really don't see how this is any different than any other looper. The flaw in the Spark is that you can't change effects... ie .... if you play a clean rhythm and want a distorted lead, it changes the rhythm to distorted.
for that you'll need to put the looper in the amp output to another speaker
The difference is that this pedal fixes that issue
@@ohgahbrielnot with this looper
That is the purpose of this pedal, it allows different effects to be played over top of each other. You can record a clean signal loop, then dub a distortion lead over top of it, then you can dub a delay or other effects over that. Unfortunately, this video dopesn't demonstrate this.
@@ohgahbriel That is not true. This pedal allows you to laydown multiple loops with different effects without having to jump through hoops like that.