according to author, fitting btwn daban and this metal frame is not perfect and difficult, he recommend original bandai sazabi ver ka for better fitting
@@skadimana55 what author saidis that metal frames are made based on bandai model measurements. Fits well on bandai models. Fitting on daban model is harder but not impossible, just need some trimming / adding glue on fitting joints. Same applies for nu, sazabi, freedom, justice, providence by this manufacturer "dian chang"
Please add English subtitles ! 🙏🏽😭😭 love your videos they’re so helpful
I would’ve loved if they changed the hip joint from a ball joint to a peg and hole.
Could you put an English sub in your video, that would help a lot, thanks.
Does this also fit daban sazabi version?
Any difficulty to assamble the metal frame to bandai MG? Sorry i cant read mandarin or kanji word... 🤔😐
dian chang or point factory kits ?
i know it's 1/100 but does it fit to Sazabi Titanium Ver ka. DABAN??
May I ask where this was purchased from?
Can only ask your friend in china（if have） buy from taobao or 拼多多 website or app than shipping to you
這次知道要給銀色油壓桿了，卡牛那套POM上不了色真的絕望
you can use it as a dumbbell
Would this work with the YJL conversion kit?
Is this daban?
Sazabi 有合金骨架，那么新安州MG 有合金骨架吗？
本來還想說買來給gk用 看到大腿關節放棄了，gk要修骨架 他做一體成型修不了
Is the fit good?
Where to buy?
is your kit are bandai.
DABAN
thx to your video, now i know why my Sazabi looked off, his chin was upside down this whole time...
It is for which Sazabi? MG or RG?
MG
Does it fit Daban version?
Yes, Daban is knock off of Bandai.
Yes, but too tight, many parts need to be thinned to fit
I wish RG sinanju make it metal frame
これマジで凄いわ
Thats impressive, not only replace, but improve tge stabilities
My saz ver ka's hips loos3, gonna get this
拼多多不到150包邮的那套吗？
是的
所以用萬代版本的應該就不會組到手痛吧
可能吧，厂家是按万代版本做的
@@lubiandedashu 不過當初組點廠的自由/正義/神諭的骨架 , 組完將近兩個禮拜都不想碰模型 , 手好痛啊
@@吳俊霖-x1m 至少会比大班的好一些，主要是大班匹配这款不修件很多都装不了
@@吳俊霖-x1m 我是買萬代巴巴托斯搭配點廠骨架，
幾乎沒什麼用到大力金剛指，過程組裝都還挺順利，
密合度和緊實度都很好，
大班產品我從沒買過，不過看一些up主有分享一些相關組裝說明，
普遍都是提到有公差問題，自然也影響組合度和緊實度不足，
感受度體驗不佳，還是建議買萬代原版，不要花錢買便宜受罪
@@lubiandedashu 想再問問前腳掌好像真的無法密合的很好 , 稍微用點力就有小小的白化 , 髖關節跟腰部位置真的很難移動
does the frame including the polycap for Sazabi's hip joint?
Thanks for information
so cool
You're the man!
I need this right now!!!
Where can I order it?
It'd available right now on gundam model central
Damn i need this. Hopefully they'll make one for Nu too
they already release the Nu ver ka version
@@valeniii is there any video for metal frame nu?
Does it fit with daban sazabi?if yes,time to get me some 😆
according to author, fitting btwn daban and this metal frame is not perfect and difficult, he recommend original bandai sazabi ver ka for better fitting
@@igonnabreakmyrustyca dang..but how bout nu?is it good to use daban?
@@skadimana55
what author saidis that metal frames are made based on bandai model measurements.
Fits well on bandai models.
Fitting on daban model is harder but not impossible, just need some trimming / adding glue on fitting joints.
Same applies for nu, sazabi, freedom, justice, providence by this manufacturer "dian chang"
什麼時間萬代終於肯在MB出 sazabi, 大家就不用那麼辛苦....
Nice metal
i want this for my sazabi.
這樣才能把玩啊 緊實多了
이건 사야지
the ver ka sazabi is heavy enough... not its going to be heavy metal!
我草 150 便宜
这。。。。我擦。。。我的卡沙又要掏我的钱包了。